Jump to content

Welcome to the new Traders Laboratory! Please bear with us as we finish the migration over the next few days. If you find any issues, want to leave feedback, get in touch with us, or offer suggestions please post to the Support forum here.

  • Welcome Guests

    Welcome. You are currently viewing the forum as a guest which does not give you access to all the great features at Traders Laboratory such as interacting with members, access to all forums, downloading attachments, and eligibility to win free giveaways. Registration is fast, simple and absolutely free. Create a FREE Traders Laboratory account here.

Tradewinds

Support and Resistance Auto Plots

Recommended Posts

This is the indicator that I use on my chart. It is the only indicator I use on a price chart. As far as price is concerned, all I care about is Support and Resistance. I use this indicator on a one minute chart of the ES E-mini SP 500. It plots a Resistance line as soon as a Peak signal fires. When the second Peak signal fires, it plots a new Resistance line, and extends the old Resistance line in a different style. The same happens for Support lines.

 

attachment.php?attachmentid=25269&stc=1&d=1310178939

 

 

This indicator in in Easy Language code, programed in TradeStation. It is shown below, plus attached as an ELD file.

 

 

//7-8-11
// Programed by tradescripter

//hh=higher high, ll=lower low
var: hh(False),ll(False),lh(False),hl(False);
var: ClsDwn(False),ClsUp(False);
var: Aftr929(False),Aftr932(False),Aftr939(False);
var: BeforeCls(False);
var: DayHrs(False),newDay(False),OKtoPlot(False);
var: Peak1(False),Peak2(False),Peak3(False),Peak4(False),Peak5(False),Peak6(False);
var: Bttm1(False),Bttm2(False),Bttm3(False),Bttm4(False),Bttm5(False),Bttm6(False);
var: Peak(False),Bttm(False);
var: PeakPrice(H),BttmPrice(L),PriorPeakPrice(H),PriorBttmPrice(L);
var: NoPriorPk(False),NoPriorBttm(False);
var: HL_Price(False),LH_Price(False);
var: NewRzstnceExt(-1), OldRzstnceExt(-1), OldSupport(-1), OldExtSpprt(-1);
var: OldRzstnceBegPrice(h), OldSprtBegPrice(L), OldHiExtBegPrice(H), OldBegPrice2(H);
var: NewRzstnceBegTime(t), NewRzstnceExtBegTime(t), NewLowExtBegTime(t), NewSpprtBegTime(t);
var: NewRzstnceBegDate(D), NewSpprtBegDate(D), NewRzstnceExtBegDate(D), NewLowExtBegDate(D);
var: HierHigh(False), LowerHigh(False), HierLow(False), LowerLow(False);
var: SteppedDwn(0);
var: NewRzstnce(-1), OldRzstnce(-1), NewSpprt(-1);
var: NewSupportExt(-1);

hh=h>h[1];
ll=l<l[1];
lh=h<h[1];
hl=l>l[1];
ClsDwn=c<o;
ClsUp=c>o;

Aftr929=T>929;
Aftr932=T>932;
Aftr939=T>939;
BeforeCls=T<1600;
DayHrs=Aftr929 and BeforeCls;

newDay=date <> date[1];

//OKtoPlot=DayHrs=True;

Peak1=ClsUp[1] and ClsDwn;
Peak2=lh[1] = False and ClsDwn;
Peak3=lh[1] = False and lh;
Peak4=ClsUp[1] and lh;
Peak5=hh[1] and hh = False;
Peak6=hh and ClsUp = False;

Bttm1=ClsDwn[1] and ClsUp;
Bttm2=hl[1] = False and ClsUp;
Bttm3=hl[1] = False and hl;
Bttm4=ClsDwn[1] and hl;
Bttm5=ll[1] and ll = False;
Bttm6=ll and ClsDwn = False;

Peak=(Peak1 = True or Peak2 = True or Peak3 = True or Peak4 = True or Peak5 = True);
Bttm=(Bttm1 = True or Bttm2 = True or Bttm3 = True or Bttm4 = True or Bttm5 = True);

NoPriorPk=Peak[1] = false;
NoPriorBttm=Bttm[1] = false;

if Peak6 and NoPriorPk then
Begin
 PeakPrice = H;
End else If
 Peak and NoPriorPk then 
Begin
 PeakPrice = H[1];
End;

if Bttm6 and NoPriorBttm then
BttmPrice=L else If Bttm and NoPriorBttm then
BttmPrice = L[1];

HierLow=BttmPrice>BttmPrice[1];
LowerHigh=PeakPrice<PeakPrice[1];

LowerLow=BttmPrice<BttmPrice[1];
HierHigh=PeakPrice>PeakPrice[1];

if LowerLow then SteppedDwn = 1 else if HierLow then SteppedDwn = 0;

if PeakPrice <> PeakPrice[1] then PriorPeakPrice = PeakPrice[1];
if BttmPrice <> BttmPrice[1] then PriorBttmPrice = BttmPrice[1];

{-- Starts a new Resistance Line, then ends the old Resistance Trend line if a new peak signal fires ---}
If Peak and NoPriorPk Then 
Begin

 OldRzstnce = NewRzstnce;

  	If Peak6 and NoPriorPk then
 	 Begin
  NewRzstnce = tl_new(d[1], t[1], H, d, t, H);
 End
Else
 Begin
  NewRzstnce = tl_new(d[1], t[1], H[1], d, t, H[1]);
 	End;

Value1 = TL_SetExtRight(NewRzstnce, True);
Value2 = TL_SetSize(NewRzstnce, 2);	
Value3 = TL_SetColor(NewRzstnce, Blue);

If OldRzstnce <> -1 Then
 Begin
 	NewRzstnceBegDate = TL_GetBeginDate(NewRzstnce);
   NewRzstnceBegTime = TL_GetBeginTime(NewRzstnce);
   OldRzstnceBegPrice = TL_GetBeginVal(OldRzstnce);
   Value4 = TL_SetExtRight(OldRzstnce, False); //Stop extending the original line to the right.
   Value5 = TL_SetEnd(OldRzstnce, NewRzstnceBegDate, NewRzstnceBegTime, OldRzstnceBegPrice);
 End;
End;

{-- Starts a new trendline if a new bottom signal fires ---}
If Bttm and NoPriorBttm Then 
Begin
 OldSupport = NewSpprt;

  	If Bttm6 and NoPriorBttm then
 	 Begin
  NewSpprt = tl_new(d[1], t[1], L, d, t, L);
 End
Else
 Begin
  NewSpprt = tl_new(d[1], t[1], L[1], d, t, L[1]);
 	End;

Value6 = TL_SetExtRight(NewSpprt, True);
Value7 = TL_SetSize(NewSpprt, 2);	
Value8 = TL_SetColor(NewSpprt, magenta);

 If OldSupport <> -1 Then
 Begin
 	NewSpprtBegDate = TL_GetBeginDate(NewSpprt);
   NewSpprtBegTime = TL_GetBeginTime(NewSpprt);
   OldSprtBegPrice = TL_GetBeginVal(OldSupport);
   Value9 = TL_SetExtRight(OldSupport, False);
   Value10 = TL_SetEnd(OldSupport, NewSpprtBegDate, NewSpprtBegTime, OldSprtBegPrice);
 End;

End;

{-- Extends the old Resistance trendline if a new peak signal fires ---}
If Peak and NoPriorPk and H <= PeakPrice[1] Then
Begin
 OldRzstnceExt = NewRzstnceExt;
 NewRzstnceExt = tl_new(d[1], t[1], OldRzstnceBegPrice, d, t, OldRzstnceBegPrice);

Value11 = TL_SetExtRight(NewRzstnceExt, True);
Value12 = TL_SetColor(NewRzstnceExt, Blue);
Value13 = Tl_setstyle(NewRzstnceExt, Tool_Dotted);

 If OldRzstnceExt <> -1 Then
 Begin
 	NewRzstnceExtBegDate = TL_GetBeginDate(NewRzstnceExt);
   NewRzstnceExtBegTime = TL_GetBeginTime(NewRzstnceExt);
   OldHiExtBegPrice = TL_GetBeginVal(OldRzstnceExt);
   Value14 = TL_SetExtRight(OldRzstnceExt, False);
   Value15 = TL_SetEnd(OldRzstnceExt, NewRzstnceExtBegDate, NewRzstnceExtBegTime, OldHiExtBegPrice);
 End;

End;

{-- Extends the old support line if a new bttm signal fires ---}
If Bttm and NoPriorBttm and L >= BttmPrice[1] Then
Begin
 OldExtSpprt = NewSupportExt;
 NewSupportExt = tl_new(d[1], t[1], OldSprtBegPrice, d, t, OldSprtBegPrice);

Value16 = TL_SetExtRight(NewSupportExt, True);
Value17 = TL_SetColor(NewSupportExt, Magenta);
Value18 = Tl_setstyle(NewSupportExt, Tool_Dotted);

 If OldExtSpprt <> -1 Then
 Begin
 	NewLowExtBegDate = TL_GetBeginDate(NewSupportExt);
   NewLowExtBegTime = TL_GetBeginTime(NewSupportExt);
   OldBegPrice2 = TL_GetBeginVal(OldExtSpprt);
   Value19 = TL_SetExtRight(OldExtSpprt, False);
   Value20 = TL_SetEnd(OldExtSpprt, NewLowExtBegDate, NewLowExtBegTime, OldBegPrice2);
 End;

End;

_PRICE_LEVELS_PRICE.ELD

5aa7108c35496_AutoLines.thumb.JPG.03d1525c275bbd46f67b131ed0266016.JPG

Share this post


Link to post
Share on other sites

Here is an updated version. This version will show the price bubble on the price axis. I added a couple of plot statements, and made the plots a point style. That way there is no connecting line between the different levels. If you make the two plots a point style, and keep the line weight at the lowest setting, then the plot will never show. Why don't I want the plot to show? Because I don't need the plot, the trendlines are what I want to see. Then why put a plot on the chart that you don't want to see, and you won't see? So that the price bubbles show on the price axis. That way I know what the price is of the support and resistance lines.

 

So I figured out a "work around" for getting a price bubble to show on the price axis. The trendlines will not show update data, only plots show the values.

 

I got rid of some variables that were not being used, and cleaned up the code a little. I had programed this in another language, and had to rework it, and didn't need some of the old variables.

 

//8-5-11
//hh=higher high, ll=lower low
var: hh(False),ll(False),lh(False),hl(False);
var: ClsDwn(False),ClsUp(False);
var: Peak1(False),Peak2(False),Peak3(False),Peak4(False),Peak5(False),Peak6(False);
var: Bttm1(False),Bttm2(False),Bttm3(False),Bttm4(False),Bttm5(False),Bttm6(False);
var: Peak(False),Bttm(False);
var: CrrntHi(H),CrrntLw(L),PriorPeakPrice(H),PriorBttmPrice(L);
var: NoPriorPk(False),NoPriorBttm(False);
var: HL_Price(False),LH_Price(False);
var: NewRzstnceExt(-1), OldRzstnceExt(-1), OldSupport(-1), OldExtSpprt(-1);
var: OldRzstnceBegPrice(h), OldSprtBegPrice(L), OldHiExtBegPrice(H), OldBegPrice2(H);
var: NewRzstnceBegTime(t), NewRzstnceExtBegTime(t), NewLowExtBegTime(t), NewSpprtBegTime(t);
var: NewRzstnceBegDate(D), NewSpprtBegDate(D), NewRzstnceExtBegDate(D), NewLowExtBegDate(D);
var: NewRzstnce(-1), OldRzstnce(-1), NewSpprt(-1);
var: NewSupportExt(-1);

hh=h>h[1];
ll=l<l[1];
lh=h<h[1];
hl=l>l[1];
ClsDwn=c<o;
ClsUp=c>o;

Peak1=ClsUp[1] and ClsDwn;
Peak2=lh[1] = False and ClsDwn;
Peak3=lh[1] = False and lh;
Peak4=ClsUp[1] and lh;
Peak5=hh[1] and hh = False;
Peak6=hh and ClsUp = False;

Bttm1=ClsDwn[1] and ClsUp;
Bttm2=hl[1] = False and ClsUp;
Bttm3=hl[1] = False and hl;
Bttm4=ClsDwn[1] and hl;
Bttm5=ll[1] and ll = False;
Bttm6=ll and ClsDwn = False;

Peak=(Peak1 or Peak2 or Peak3 or Peak4 or Peak5);
Bttm=(Bttm1 or Bttm2 or Bttm3 or Bttm4 or Bttm5);

NoPriorPk=Peak[1] = false;
NoPriorBttm=Bttm[1] = false;

if Peak6 and NoPriorPk then
CrrntHi = H
else If Peak and NoPriorPk then 
CrrntHi = H[1];

if Bttm6 and NoPriorBttm then
CrrntLw=L else If Bttm and NoPriorBttm then
CrrntLw = L[1];

plot1(CrrntHi, "Current High"); // Set to points so that the price of the line shows up on the axis
plot2(CrrntLw, "Current Low");

if CrrntHi <> CrrntHi[1] then PriorPeakPrice = CrrntHi[1];
if CrrntLw <> CrrntLw[1] then PriorBttmPrice = CrrntLw[1];

{-- Starts a new Resistance Line, then ends the old Resistance Trend line if a new peak signal fires ---}
If Peak and NoPriorPk Then 
Begin

 OldRzstnce = NewRzstnce;

  	If Peak6 and NoPriorPk then
  NewRzstnce = tl_new(d[1], t[1], H, d, t, H)
Else
  NewRzstnce = tl_new(d[1], t[1], H[1], d, t, H[1]);

Value1 = TL_SetExtRight(NewRzstnce, True);
Value2 = TL_SetSize(NewRzstnce, 2);	
Value3 = TL_SetColor(NewRzstnce, Blue);

If OldRzstnce <> -1 Then
 Begin
 	NewRzstnceBegDate = TL_GetBeginDate(NewRzstnce);
   NewRzstnceBegTime = TL_GetBeginTime(NewRzstnce);
   OldRzstnceBegPrice = TL_GetBeginVal(OldRzstnce);
   Value4 = TL_SetExtRight(OldRzstnce, False); //Stop extending the original line to the right.
   Value5 = TL_SetEnd(OldRzstnce, NewRzstnceBegDate, NewRzstnceBegTime, OldRzstnceBegPrice);
 End;
End;

{-- Starts a new trendline if a new bottom signal fires ---}
If Bttm and NoPriorBttm Then 
Begin
 OldSupport = NewSpprt;

  	If Bttm6 and NoPriorBttm then
  NewSpprt = tl_new(d[1], t[1], L, d, t, L)
Else
  NewSpprt = tl_new(d[1], t[1], L[1], d, t, L[1]);

Value6 = TL_SetExtRight(NewSpprt, True);
Value7 = TL_SetSize(NewSpprt, 2);	
Value8 = TL_SetColor(NewSpprt, magenta);

 If OldSupport <> -1 Then
 Begin
 	NewSpprtBegDate = TL_GetBeginDate(NewSpprt);
   NewSpprtBegTime = TL_GetBeginTime(NewSpprt);
   OldSprtBegPrice = TL_GetBeginVal(OldSupport);
   Value9 = TL_SetExtRight(OldSupport, False);
   Value10 = TL_SetEnd(OldSupport, NewSpprtBegDate, NewSpprtBegTime, OldSprtBegPrice);
 End;

End;

{-- Extends the old Resistance trendline if a new peak signal fires ---}
If Peak and NoPriorPk and H <= CrrntHi[1] Then
Begin
 OldRzstnceExt = NewRzstnceExt;
 NewRzstnceExt = tl_new(d[1], t[1], OldRzstnceBegPrice, d, t, OldRzstnceBegPrice);

Value11 = TL_SetExtRight(NewRzstnceExt, True);
Value12 = TL_SetColor(NewRzstnceExt, Blue);
Value13 = Tl_setstyle(NewRzstnceExt, Tool_Dotted);

 If OldRzstnceExt <> -1 Then
 Begin
 	NewRzstnceExtBegDate = TL_GetBeginDate(NewRzstnceExt);
   NewRzstnceExtBegTime = TL_GetBeginTime(NewRzstnceExt);
   OldHiExtBegPrice = TL_GetBeginVal(OldRzstnceExt);
   Value14 = TL_SetExtRight(OldRzstnceExt, False);
   Value15 = TL_SetEnd(OldRzstnceExt, NewRzstnceExtBegDate, NewRzstnceExtBegTime, OldHiExtBegPrice);
 End;

End;

{-- Extends the old support line if a new bttm signal fires ---}
If Bttm and NoPriorBttm and L >= CrrntLw[1] Then
Begin
 OldExtSpprt = NewSupportExt;
 NewSupportExt = tl_new(d[1], t[1], OldSprtBegPrice, d, t, OldSprtBegPrice);

Value16 = TL_SetExtRight(NewSupportExt, True);
Value17 = TL_SetColor(NewSupportExt, Magenta);
Value18 = Tl_setstyle(NewSupportExt, Tool_Dotted);

 If OldExtSpprt <> -1 Then
 Begin
 	NewLowExtBegDate = TL_GetBeginDate(NewSupportExt);
   NewLowExtBegTime = TL_GetBeginTime(NewSupportExt);
   OldBegPrice2 = TL_GetBeginVal(OldExtSpprt);
   Value19 = TL_SetExtRight(OldExtSpprt, False);
   Value20 = TL_SetEnd(OldExtSpprt, NewLowExtBegDate, NewLowExtBegTime, OldBegPrice2);
 End;

End;

Share this post


Link to post
Share on other sites

Hi Tradewinds,

 

Thank you, Thank you and Thank you for the support and resistance script. I had been looking this for a while.

 

Can u please let me know how many bars it takes to plot the support or resistance. for ex, if we are plotting parabolic sars, the green dot or red dots are plotted after the three bars have moved ahead. its more like lagging 3 bars.

 

Once again, your script help is greatly appreciated...

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Topics

  • Posts

    • $CSCO Cisco Systems stock, nice top of range breakout, from Stocks to Watch at https://stockconsultant.com/?CSCOSEPN Septerna stock watch for a bottom breakout, good upside price gap
    • $CSCO Cisco Systems stock, nice top of range breakout, from Stocks to Watch at https://stockconsultant.com/?CSCOSEPN Septerna stock watch for a bottom breakout, good upside price gap
    • MNST Monster Beverage stock, top of range breakout above 60.45, from Stocks to Watch at https://stockconsultant.com/?MNST
    • ...hallucinates.... Student: “What if we gave the monkey LSD?” Guru: “The monkey already did LSD”
    • Question: To those that had/have cancer, what were the signs that made you think “something is not right here” to make you go see a doctor? Answer: So, 5/25/2018, I woke up, got ready for work, and as I walked to my car, I started gagging. Like something was stuck in my throat and I needed to clear it. And then it went away.   But 10 minutes after that, I was T-boned at 40mph on the driver side door. But what made me see a doctor was while my muscles felt better and bruises were going away, the gagging still continued, I started having fevers, my neck felt swollen, I was having such a hard time breathing, and I'd have random sharp pains in my chest, but not from where the seat belt saved me.   2 weeks after the accident, I finally see an urgent care doctor, who looks me over, tells me I'm fine, but luckily requests a neck X-ray. And I ask for a chest X-ray, which he rolls his eyes but let me have (most of my pain was in the neck, so I understand).   The very next day, he calls and says “So, that chest X-ray shows there's a 4 inch mass on your heart and lungs, and your lungs have been filling up with fluid, as well as in your pericardial (heart) wall. We need you to come in tomorrow.”   Turns out the big mass, due to the accident, caused my heart and lungs to tear and fill with fluid, the swollen neck and gagging was caused by 2 metastasized tumors, and the fevers and weight loss were symptoms. Stage 4b Hodgkin's Lymphoma.   But thankfully, we went very aggressive with chemo (and had a lot of bad side effects that don't normally happen to patients), and now I'm about 16 months cancer-free. Yay lucky X-rays! Rachel Jurina, Quora Source: https://www.quora.com/To-those-that-had-have-cancer-what-were-the-signs-that-made-you-think-something-is-not-right-here-to-make-you-go-see-a-doctor   Profits from free accurate cryptos signals: https://www.predictmag.com/  
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.