Jump to content

Welcome to the new Traders Laboratory! Please bear with us as we finish the migration over the next few days. If you find any issues, want to leave feedback, get in touch with us, or offer suggestions please post to the Support forum here.

  • Welcome Guests

    Welcome. You are currently viewing the forum as a guest which does not give you access to all the great features at Traders Laboratory such as interacting with members, access to all forums, downloading attachments, and eligibility to win free giveaways. Registration is fast, simple and absolutely free. Create a FREE Traders Laboratory account here.

Recommended Posts

Nice call. Neg, these order flow patterns I trade off can change rapidly... perhaps the RP bill passing concerned some investors. On many days they do tend to get into a routine but that hasn't happened today...

 

There were also sellers iniating shorts from 38.... As we seen, my initial exit was poor but was indicative of the higher risk. The LQ providers eventually got overrun. This happens quickly in bearish markets but can take forever in normal markets.

 

Again these are just narratives.. whats important is the pattern. Maybe, there were long traders like me expecting to challenge 40 and when they didn't see it they bailed.

 

Also remember institutions aren't the only game... there are other people playing other games. The equities bots are very important for trading index futures. I believe in this case, we had institutions short from 38.. LQ providers and some long institutions at 36.50 and then equities bots executing into the 36.50. The equities bots turned the game in this case, imo.

Edited by Predictor

Share this post


Link to post
Share on other sites
Yes pretty much if you are talking about the area I have highlighted on the chart:-

 

attachment.php?attachmentid=30135&stc=1&d=1343241646

 

Yes, thanks. what does the IBL 1330.50 mean?

 

Just from looking at your chart, it appears that sellers shorted from the 1340.25 area and then start covering those shorts at the 1326.50 area. Even though its low volume that area means something. Just thinking outloud to myself.

Share this post


Link to post
Share on other sites

You have to understand that the futures are made of stocks. The value of the stocks determine value of futures. If the stocks and futures get too far out of line then bots or computers will buy/sell futures. I do not use premium or anything like that but I track equities to know what will happen in futures. Everything is arbed against everything these days. Single market analysis has a use but only using price doesn't provide enough of an edge in most cases. I track order flow in futures and the action in other markets.

 

If one observes buying at tops and selling at bottoms, the'yd be a fool to attribute this to the institions which are known to sit LIMIT. Most institutions define a range where they want to do business... i.e selling at limit and then sometimes at market if they don't execute 100%. But if one does observe buying at tops and selling at bottoms. This contra folow activity is caused by equities bots, imo, running into institutions. Sometimes they overrun institutions... sometimes they are stopped by the institutions. These institutions like to operate in the futures. They are old school.... buy low/sell high guys.

 

Keep in mind everything is a simplificiation.... if the equities are getting hit then the LQ providers who arb against equities will have to pull bids too. Most trading is algorithmic. Another factor is that funds who hold baskets of stocks will hedge in the futures... this is another activity that will keep them in line. As a fund sees their value dropping, they go into the futures to short as hedge.

 

What does equities bots mean?
Edited by Predictor

Share this post


Link to post
Share on other sites
Yes, thanks. what does the IBL 1330.50 mean?

 

Just from looking at your chart, it appears that sellers shorted from the 1340.25 area and then start covering those shorts at the 1326.50 area. Even though its low volume that area means something. Just thinking outloud to myself.

 

IBL = initial balance low. The initial balance is generally the first hour of trading. The idea is that a lot of OTF (other time frame = big longer term players) will execute within the first hour of trade. So it's a useful reference for the day. It doesn't always work in fairness. But when it does it does. It's pretty obvious when it's more likely to work as the intraday profile lines up. i.e. the IBH/IBL remain low volume areas.

 

Low volume means that price is not seen as fair there. So either it's likely to reject fairly quickly and reverse or it might run through quickly and not trade lots of volume again. Obviously this depends on context. Just because there is a high or low volume area it doesn't mean that automatically it will always precipitate one of the mentioned responses.

Share this post


Link to post
Share on other sites
You have to understand that the futures are made of stocks. The value of the stocks determine value of futures.

 

And to be fully correct, the opposite is true as well: futures determine the value of the composite basket of stocks in the index.

 

By the way, you may use "specialized tools" but one does not really need to. My tools are "normal" but very effective. Moreover, I very lightly use profiles these days but I still think that in the right hands they can be valuable. Just because you didn't have success in using them does not mean that they are useless.

Share this post


Link to post
Share on other sites

I use volume profiles extensively.. I just don't use market profile theory. I only found its use when I completely detached it from what I read and thought I knew. Exactly, this is why I eluded to the interplay between the various component forces.

 

Someone asked why I picked up using the volume profile. The reason was that I read about it, obviously many futures traders used it and it was promoted by prominent teachers in the field. I agree that specialized tools aren't required for taking longer term trades. I anticipated the market hundreds of times without ever even using volume. But, for trading/competing intraday on a regular basis, I disagree.. but it depends on the type of trading sure.

 

One can trade from pure price action but the opportunities are fewer... btw there is nothing special about volume profile... one read everything that can be read in volume profile from price chart only. I developed a method to do this... in fact one can read more. I may write an article on some of these ideas in the future. Most probably don't understand the VP except those who really studied it.. away from books and such.

 

Of course, market profile is no different then candlesticks or any other charting/graphing method. This was why I had a problem at first. I thought it was something more. I may use candlesticks and another trader may use candlesticks.. tells nothing about the strategy we are using.

 

And to be fully correct, the opposite is true as well: futures determine the value of the composite basket of stocks in the index.

 

By the way, you may use "specialized tools" but one does not really need to. My tools are "normal" but very effective. Moreover, I very lightly use profiles these days but I still think that in the right hands they can be valuable. Just because you didn't have success in using them does not mean that they are useless.

Edited by Predictor

Share this post


Link to post
Share on other sites
I agree that specialized tools aren't required for taking longer term trades. I anticipated the market hundreds of times without ever even using volume. But, for trading/competing intraday on a regular basis, I disagree.. but it depends on the type of trading sure.

 

Specialized tools aren't required for taking short term trades either. You can disagree with that, but I'm proof that on an intraday basis, one can compete and do well; if you want specifics on performance I can post those as well. My trades are a few minutes to a few hours.

 

I'm not saying I'm always in tune with the market; a couple of recent days I had larger intraday drawdowns than I'm comfortable with, and today I found the market a bit challenge to get in sync with during the first hour. But I look at the order book, the tape, simple highs and lows, and volume as a function of time. Using these for the "now", and adding the occasional profile, but mostly price alone for market structure, I have what I need. Most people, particularly vendors, reject the notion that simple tools combined with intense amounts of work on one's self, can bring improved results and consistent success. But, it has worked for me.

Share this post


Link to post
Share on other sites

Josh, first I think you took this the wrong way. I am speaking about my personal experience, and also trying to provide some information for struggling traders --- of course, not on a platter. Based on what you're saying, we probably use similar types of methods for our day trading. Let me be clear, if you're happy with your information and your results then certainly you should continue to do that.

 

However, let me also be clear that if I were using traditional time/sales, DOM, single market price based charts, Fibs, etc (all stuff that most try to use) that I would be at a significant disadvantage which would translate into fewer opportunities, larger risk per trade, less confidence, and lower probability trades.

 

I am primarily a tape reader and a discretionary trader -- with a few additional systems I developed that I trade. I believe that you attended my free tape reading webinar (hosted by TradersLab) where I shared how I was able to successfully read the orderflow using a very simple technique that I invented and nothing more then a price quote. I still use similar techniques. But, today I use specialized software that gives me a greater insight into the dynamics of the market, allows me to control my risk to a greater degree, and allows me to take a much finer grained and intimate view of the market. Having said that, I still have to execute and pull the trigger. My techniques were developed over many years and intensive, intensive training, and I've never even suggested that software alone could produce success.

 

Also, I'm sure that many traders here would be very appreciative if you share your calls in real-time, analysis, etc.

Edited by Predictor

Share this post


Link to post
Share on other sites
long 1350.25 from the pivot of 1350 as support. Target is 1354, stop 3pts. buying on pull back with the trend.

 

Out ES at 1356.25. After I saw the bulls was targeting the 1354 area the volume profile sent yesterday (thank you for that chart), i waited patiently. The next area was a gap fill on 1356, so just took it off there.

Share this post


Link to post
Share on other sites
Out ES at 1356.25. After I saw the bulls was targeting the 1354 area the volume profile sent yesterday (thank you for that chart), i waited patiently. The next area was a gap fill on 1356, so just took it off there.

 

Gap fill? Depending on your interpretation of 'gap' fill, it would be 57.00/58.75. Unless of course you're talking about testing a low volume area(which really is 57 anyway)?

Share this post


Link to post
Share on other sites
You like those pivots huh?

 

Well, I notice the buyers and sellers responds at the pivots. The price either goes up or down at these levels. So I like to treat these pivots as support and resistance levels for targets and buys.

Share this post


Link to post
Share on other sites
Gap fill? Depending on your interpretation of 'gap' fill, it would be 57.00/58.75. Unless of course you're talking about testing a low volume area(which really is 57 anyway)?

 

Yes, thats right. I was looking at the 61.8% retrace from last week high to this week low as well. Its in the 1356-1358 area as well.

Share this post


Link to post
Share on other sites

Okay so after the failure at 57, target of the top of the balance area was quite clear. It's not quite turned properly yet but it could easily. Not to say it will. The point is that using the auction over the last 3 days gave a very clear indication of market intent after its failure to break 57.

 

attachment.php?attachmentid=30149&stc=1&d=1343317300

2012-07-26_2.thumb.jpg.9ce91d016190ea0d3ec6aa4a4dce635d.jpg

Share this post


Link to post
Share on other sites

If it starts to develop below the upper balance extreme (48.75) it could either just slide lower, or test the extreme again before deciding to move lower or move higher again. Just to but this into context, current range is much lower than last three days. This could mean we will see range extension. However, the pattern has been over the last few weeks that we get a few big days then some much smaller ones dotted in between.

Share this post


Link to post
Share on other sites

Took at long at 1349.50 after 1347.50 area held and the 15 min Slow Stochastic gave buy signal. 2.25 stop. Target is 1354 to see if the buyers can take out this level and test the gap again.

 

Reasons 1. in a uptrend 2. 15 min slowstoch just crossed 3. support at 47.50 4. morning star on 15 min at the 47.50 area.

Edited by goodoboy

Share this post


Link to post
Share on other sites
Took at long at 1349.50 after 1347.50 area held and the 15 min Slow Stochastic gave buy signal. 2.25 stop. Target is 1354 to see if the buyers can take out this level and test the gap again.

 

I exit too early and took 2.5pts. I should have waited for retest of 1354 atleast.

Share this post


Link to post
Share on other sites
Also, I'm sure that many traders here would be very appreciative if you share your calls in real-time, analysis, etc.

 

I understand what you're saying.

 

Regarding this quote above, I have shared numerous real time calls previously, and lately no one has paid particular attention when I have posted things real time so I just have no interest in doing so.

 

I post many more trades real time in the BMT forum, in a particular thread there, but out of respect for TL won't post links, but you can go see two short trades I posted real time this morning from 56 and 55. I post probably 5 or 6 trades a week in real time on that thread, and often comment with analysis, for what little that may be worth. I find it difficult to post real time trades in more than one forum, so if you're really interested please check that thread out.

Share this post


Link to post
Share on other sites
I understand what you're saying.

 

Regarding this quote above, I have shared numerous real time calls previously, and lately no one has paid particular attention when I have posted things real time so I just have no interest in doing so.

 

I post many more trades real time in the BMT forum, in a particular thread there, but out of respect for TL won't post links, but you can go see two short trades I posted real time this morning from 56 and 55. I post probably 5 or 6 trades a week in real time on that thread, and often comment with analysis, for what little that may be worth. I find it difficult to post real time trades in more than one forum, so if you're really interested please check that thread out.

 

I don't think it's the case that people aren't paying attention. I think it's very interesting, but perhaps there's a better place for them in the forum. Maybe the Traders Log would be better?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By Quantower
      The main goal of this thread is to show what Power Trades is and how it works in different markets. We will show some patterns on the ES and NQ futures, as well as discuss possible improvements to this functionality.
      What is Power Trades?
      Ok, first we will consider what the Power Trades is and how it finds zones.
      Power Trades shows the zones with the execution of a large number of orders in a very short time, which will affect the price change with a high probability.
      Here are a few examples of how it looks like


      How it finds zones?
      There is a continuous process of placing, changing and executing orders in the market. All this affects the price change and the expectations of traders regarding the future price.
      When a large order appears at a certain level, the price is more likely to come to this order and it will be executed because the market is always looking for levels with liquidity. This already applies to the order flow and the mechanics of orders matching, so we will omit the principles on which the orders are matched.
      It is only important to understand that "abnormal events" occur in the market at certain times. Execution of a significant volume of orders in a very short time is one of such events.
      The Power Trades Scanner has several important settings that directly affect the results:

      Total Volume — the minimum value of the volume that should be traded during the specified time interval
      Time Interval, sec — the time over which the Total Volume should be traded
      Basis Volume Interval, sec — this parameter shows how much % took the traded volume in the total volume for the specified time.
      Zone Height, ticks — this parameter will show only those zones where the height is less than or equal to the specified value (in ticks).
      Level2 level count — the number of levels that are involved in the calculation of Imbalance and the Level 2 Ratio column in the table of results.
      Filter by Delta,% — the parameter will show zones that have a delta value greater than or equal to that specified in the setting. The value must be specified by the module, so the table will show both positive and negative delta values. We recommend paying attention to the zones with the delta above 50% (taking into account the specifics of each trading instrument).
      For example, let's set the Total Volume of 2000 contracts and Time Interval in 3 seconds on the E-mini SP500 futures. This means that the scan will be based on the available history and will show on the chart only those zones that have such a volume for the specified time.

      Additionally, it is worth to set a delta value to filter out the zones with one-side trades. The more delta value, the high probability that the price will reverse.

      So, as a starting point about this scanner, I think this information will be enough
    • By makuchaku
      Hi everyone,
      This is my maiden analysis using volume profile - so please don't hesitate to share your feedback.
      As per the attached analysis, I think that SPY is primed for a short - for many reasons
      - Multiple strong rejection of long positions exist at Resistance R1 and R2 : seems like sellers defending their positions
      - Very strong short volume seen at R2 : further signifying sellers who are ready at that level
      However, once the price reaches Support S1, there seems to be a strong buying sentiment which has rejected previous shorts. You can see trading ranges & pullbacks to S1 where buyers and sellers seem to agree on a price range, often leading to a buyer dominance.
      What do you think?

    • By TraderJoe
      Hey All,
      does anyone sell Volume Profile Indicator for NT8.
       
      Regards
  • Topics

  • Posts

    • A custom Better Daily Range indicator for MT5 is now available on the Metaquotes website and directly in the MT5 platform. https://www.mql5.com/en/market/product/103800 The Better Daily Range indicator shows the previous trading day's price range on the current day's chart. Many traders mark out the previous day's high, low, and the current day's open before trading. This is not an average true range indicator (ATR). This is not an average daily range indicator (ADR). This is a daily range indicator (DR). This indicator shows horizontal maximum and minimum range lines. If your broker-dealer's MT5 platform shows Sunday bars, Sunday bars are not included as previous days. In other words, Monday uses Friday's price data (skips Sunday). This indicator also shows two 25% (of range) breakout lines: one that is 25% higher than the maximum range line, and one that is 25% lower than minimum range line. A middle range line is also shown. Immediately after the daily close of your broker-dealer, all five range lines update to the new daily values.   Many traders only trade during times of high volume/liquidity. The Better Daily Range indicator also shows five adjustable time separator lines: A local market open time line (a vertical line), A local market middle time A line (a vertical line), A local market middle time B (a vertical line), A local market middle time C (a vertical line), A local market close time (a vertical line), and A local market open price (a horizontal line). The location of the local market open price depends on your input local market open time. In other words, you input your desired market open time according to your local machine/device time and the indicator automatically shows all five session lines. When your incoming price bars reach your input local market open time line, the indicator automatically shows the price to appear at your input local market open time. If your broker-dealer's MT5 platform shows Sunday bars, the time separator lines do not show on a Sunday. Immediately after midnight local machine/device time, the five session time lines (vertical lines) are projected forward into the current day (into the future hours) and the local open price line is erased. The local open price line reappears when the price bars on the chart reach your input local open time (your local machine/device time).   The indicator has the following inputs (settings):   Chart symbol of source chart [defaults to: EURUSD] - Allows you to show data from another chart symbol other than the current chart symbol. Handy for showing standard timeframe data on an MT5 Custom Chart. Local trading session start hour [defaults to: 09] - Set your desired start hour for trading according to the time displayed on your local machine/device operating system (all times below are your local machine/device operating system times). The default setting, 09, means 9:00am. Local trading session start minute [defaults to: 30] - Set your desired start minute. The default setting, 30, means 30 minutes. Both the default hour and the default minute together mean 9:30am. Local trading session hour A [defaults to: 11] - Set your desired middle hour A for stopping trading when volume tends to decrease during the first half of lunch time. The default setting, 11, means 11:00am. Local trading session minute A [defaults to: 00] - Set your desired middle minute A. Both the default hour and the default minute together mean 11:00am. Local trading session hour B [defaults to: 12] - Set your desired middle hour B for the second half of lunch time. The default setting, 12, means 12:00pm (noon). Local trading session minute B [defaults to: 30] - Set your desired middle minute B. Both the default hour and the default minute together mean 12:30pm. Local trading session hour C [defaults to: 14] - Set your desired middle hour C for resuming trading when volume tends to increase. The default, 14, means 2:00pm. Local trading session minute C [defaults to: 00] - Set your desired middle minute C. Both the default hour and the default minute together mean 2:00pm. Local trading session end hour [defaults to: 16] - Set your desired end hour for stopping trading. The default setting, 16, means 4:00pm. Local trading session end minute [defaults to: 00] - Set your desired end minute for stopping trading. Both the default hour and the default minute together mean 4:00pm. High plus 25% line color [defaults to: Red]. High plus 25% line style [defaults to: Soid]. High plus 25% line width [defaults to 4]. High line color [defaults to: IndianRed]. High line style [defaults to: Solid]. High line width [defaults to: 4]. Middle line color [defaults to: Magenta]. Middle line style [defaults to: Dashed]. Middle line width [defaults to: 1]. Low line color [defaults to: MediumSeaGreen]. Low line style [defaults to: Solid]. Low lien width [defaults to: 4]. Low minus 25% line color [defaults to: Lime]. Low minus 25% line style [defaults to: Solid]. Low minus 25% line width [defaults to: 4]. Local market open line color [defaults to: DodgerBlue]. Local market open line style [defaults to: Dashed]. Local market open line width [defaults to: 1]. Local market middle lines color [defaults to: DarkOrchid]. Local market middles lines style [defaults to: Dashed]. Local market middles lines width [defaults to: 1]. Local market close line color [default: Red]. Local market close line style [Dashed]. Local market close line width [1]. Local market open price color [White]. Local market open price style [Dot dashed with double dots]. Local market open price width [1].
    • A custom Logarithmic Moving Average indicator for MT5 is now available for MT5 on the Metaquotes website and directly in the MT5 platform. https://www.mql5.com/en/market/product/99439 The Logarithmic Moving Average indicator is a moving average that inverts the formula of an exponential moving average. Many traders are known to use logarithmic charts to analyze the lengths of price swings. The indicator in this post can be used to analyze the logarithmic value of price on a standard time scaled chart. The trader can set the following input parameters: MAPeriod [defaults to: 9] - Set to a higher number for more smoothing of price, or a lower number for faster reversal of the logarithmic moving average line study. MAShift [defaults to: 3] - Set to a higher number to reduce the amount of price crossovers, or a lower for more frequent price crossovers. Indicator line (indicator buffer) can be called with iCustom in Expert Advisors created by Expert Advisor builder software or custom coded Expert Advisors: No empty values; and No repainting.
    • A custom Semi-Log Scale Oscillator indicator is now available for MT5 on Metaquotes website and directly in the MT5 platform. https://www.mql5.com/en/market/product/114705 This indicator is an anchored semi-logarithmic scale oscillator. A logarithmic scale is widely used by professional data scientists to more accurately map information collected throughout a timeframe, in the same way that MT5 maps out price data. In fact, the underlying logic of this indicator was freely obtained from an overseas biotech scientist. A log-log chart displays logarithmic values on both the x (horizontal) and y (vertical) axes, which generally produces a straight line that points up, down, or remains flat. A straight line is not very useful for trading markets because such a straight line is so smoothed that actual price values that appear over time are very far away from the line study. In contrast, a semi-log chart is only logged on one axis--generally, the y axis. Such a semi-log chart is well suited for trading markets because the time (x) axis is preserved in its original form while at the same time, providing a graduated y scale where the distance between price increments progressively increases as price rises higher (and decreases as price falls lower). This allows us to establish a zero level for a low price, clearly view trends on straighter angles, and clearly observe amplified price spikes at high prices. Accordingly, this indicator employs a semi-log scale on the y axis only. This indicator is anchored because it allows you to specify a start time for calculation of price bars. The settings are as follows: Year.Month.Day Hour:Minute - defaults to 1970.01.01 00:01 - if left on default setting, the indicator automatically detects the earliest price bar in chart history--even where the year 1970 is not in history. Notes appear in the indicator settings window. Size of first pip step to log - defaults to 135 - this default is suitable for higher timeframes such a MN1 (monthly), while 5 is suitable for lower timeframes such as M1 (minute). Ultimately, optimal settings will depend on the timeframe that you attach the indicator to, the level of price volatility within that timeframe, and start time that you choose. Remember... The semi-log formula calculates from low to high, so your start time must always be a major swing low. Again, notes appear in the indicator settings window. The standard (built-in) MT5 indicators that can be applied to the "Previous indicator's data" can be applied to this indicator. Indicator lines (indicator buffers) can be called with iCustom in Expert Advisors created by Expert Advisor builder software or custom coded Expert Advisors. The log scale Open, High, Low, and Close prices are buffers: No empty values; and No repainting.
    • A custom Gann Candles indicator is now available for MT5 on the Metaquotes website and directly in the MT5 platform. https://www.mql5.com/en/market/product/126398 This Gann Candles indicator incorporates a series of W.D. Gann's strategies into a single trading indicator. Gann was a legendary trader who lived from 1878 to 1955. He started out as a cotton farmer and started trading at age 24 in 1902. His strategies included geometry, astronomy, astrology, times cycles, and ancient math. Although Gann wrote several books, none of them contain all of his strategies so it takes years of studying to learn them. He was also a devout scholar of the Bible and the ancient Greek and Egyptian cultures, and he was a 33rd degree Freemason of the Scottish Rite. In an effort to simplify what I believe are the best of Gann's strategies, I reduced them into one indicator that simply colors your preexisting price bars when those strategies are in-sync versus out-of-sync. This greatly reduces potential chart clutter. Also, I reduced the number of input settings down to only two: FastFilter, and SlowFilter Both FastFilter and SlowFilter must be set to 5 or more, as noted in the Inputs tab upon attaching the indicator to your chart. Gann Candles works on regular time-based charts (M5, M15, M20, etc.) and custom charts (Renko, range bars, etc.). The indicator does not repaint. When using the default settings, blue candles form bullish price patterns, gray candles form flat (sideways) price patterns, and white candles form bearish price patterns. The simplest way to trade Gann Candles is to buy at the close of a blue candle and exit at the close of a gray candle, and then sell at the close of a white candle and exit at the close of a gray candle.
    • A custom Anchored VWAP with Standard Deviation Bands indicator for MT5 is now available on the Metaquotes website and directly through the MT5 platform. https://www.mql5.com/en/market/product/99389 The volume weighted average price indicator is a line study indicator that shows in the main chart window of MT5. The indicator monitors the typical price and then trading volume used to automatically push the indicator line toward heavily traded prices. These prices are where the most contracts (or lots) have been traded. Then those weighted prices are averaged over a look back period, and the indicator shows the line study at those pushed prices. The indicator in this post allows the trader to set the daily start time of that look back period. This indicator automatically shows 5 daily look back periods: the currently forming period, and the 4 previous days based on that same start time. For this reason, this indicator is intended for intraday trading only. The indicator automatically shows vertical daily start time separator lines for those days as well. Both typical prices and volumes are accumulated throughout the day, and processed throughout the day. Important update: v102 of this indicator allows you to anchor the start of the VWAP and bands to the most recent major high or low, even when that high or low appears in your chart several days ago. This is how institutional traders and liquidity providers often trade markets with the VWAP. This indicator also shows 6 standard deviation bands, similarly to the way that a Bollinger Bands indicator shows such bands. The trader is able to set 3 individual standard deviation multiplier values above the volume weighted average price line study, and 3 individual standard deviation multiplier values below the volume weighted average price line study. Higher multiplier values will generate rapidly expanding standard deviation bands because again, the indicator is cumulative. The following indicator parameters can be changed by the trader in the indicator Inputs tab: Volume Type [defaults to: Real volume] - Set to Tick volume for over-the-counter markets such as most forex markets. Real volume is an additional setting for centralized markets such as the United States Chicago Mercantile Exchange. VWAP Start Hour [defaults to: 07] - Set according to broker's or broker-dealer's MT5 server time in 24 hour format. For example, in the New York, United States time zone, 07 is approximately the London, United Kingdom business open hour. VWAP Start Minute [defaults to: 00] - Set according to broker's or broker-dealer's MT5 server time in 24 hour format. For example, 00 is on the hour with no delay of minutes within that hour. StdDev Multiplier 1 [defaults to: 1.618] - Set desired standard deviation distance between the volume weighted average price line study and its nearest upper and lower bands. For example, 1.618 is a basic Fibonacci ratio. Some traders prefer 1.000 or 1.250 here. StdDev Multiplier 2 [defaults to: 3.236] - Set desired standard deviation distance between the volume weighted average price line study and its middle upper and lower bands. For example, 3.236 is 1.618 (above) + 1.618. Some traders prefer 2.000 or 1.500 here. StdDev Multiplier 3 [defaults to: 4.854] - Set desired standard deviation distance between the volume weighted average price line study and its furthest upper and lower bands. For example, 4.854 is 1.618 (above) + 3.236 (above). Some traders prefer 3.000 or 2.000 here. VWAP Color [defaults to: Aqua] - Set desired VWAP line study color. This color automatically sets the color of the start time separators as well. SD1 Color [defaults to: White] - Set desired color of nearest upper and lower standard deviation lines. SD2 Color [defaults to: White] - Set desired color of middle upper and lower standard deviation lines. SD3 Color [defaults to: White] - Set desired color of furthest upper and lower standard deviation lines. Just to clarify, popular standard deviation bands settings are: 1.618, 3.236, and 4.854; or 1.000, 2.000, and 3.000; or 1.250, 1.500, and 2.000. Examples of usage *: In a ranging (sideways) market, enter a trade at the extremes of the standard deviation bands (SD3) and exit when price returns to the VWAP line study. Trade between SD1Pos and SD1 Neg, alternately buying and selling from one standard deviation line to the other. In a trending (rising or falling) market, enter a buy when a price bar opens above the VWAP line study, and exit at the nearest standard deviation band above (SD1Pos). Optionally, repeat the same trade but substitute SD1Pos for the VWAP, and SD2Pos for SD1. Reverse for sell; or Trade all lines (VWAP, SD1Pos, SD2Pos, and SD3Pos) in the same way. Again, reverse for sell. Indicator lines (indicator buffers) can be called with iCustom in Expert Advisors created by Expert Advisor builder software or custom coded Expert Advisors: No empty values; and No repainting.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.