EL: Using ADE to Transfer Data Between Charts ERROR

[nuno-online 10]

Hi

 

i want to plot yesterday daily Pivot , supports an resistances in 1 hour Chart

 

I installed all components as described :

1/ place the elcollections.dll in "C: \Program Files\TS Support\Multicharts\"

2/ imported and compiled ELCollections.eld

2/ install ADE in c:\

4/ imported and compiled AllDataEverywhere.ELD

 

I created an indicator that calculates daily Pivot , supports an resistances

 

Vars: Pivot(0), Resistance1(0), Resistance2(0), Resistance3(0), Support1(0), Support2(0), Support3(0),
     Class("Pivot&Support1&Support2&Support3&Resistance1&Resistance2&Resistance3"),
     InfoMap(MapSN.New); // used to pass data to ADE

Pivot = ( Low + High + Close ) / 3;
Resistance1 = ( Pivot * 2 ) - Low;
Resistance2 = Pivot + Range;
Resistance3 = Resistance1 + Range;
Support1 = ( Pivot * 2 ) - High;
Support2 = Pivot - Range;
Support3 = Support1 - Range;

// Put the information we want to store in our InfoMap
Value1 = MapSN.Put(InfoMap, "Pivot", Pivot);
Value1 = MapSN.Put(InfoMap, "Resistance1", Resistance1);
Value1 = MapSN.Put(InfoMap, "Resistance2", Resistance2);
Value1 = MapSN.Put(InfoMap, "Resistance3", Resistance3);
Value1 = MapSN.Put(InfoMap, "Support1", Support1);
Value1 = MapSN.Put(InfoMap, "Support2", Support2);
Value1 = MapSN.Put(InfoMap, "Support3", Support3);

// Tell ADE to store this info for the current symbol and bar interval
Value1 = ADE.PutBarInfo(Class, GetSymbolName, ADE.BarInterval, ADE.BarID, InfoMap);

Plot1( Pivot[1], "PP");
plot2( Resistance1[1], "R1");
Plot3( Resistance2[1], "R2");
Plot4( Resistance3[1], "R3");
Plot5( Support1[1], "S1");
Plot6( Support2[1], "S2");
Plot7( Support3[1], "S3");

 

 

i inserted the indicator below in 1 HOUR CHART to get values

Inputs:
  Interval(60);

Vars:
Class("Pivot&Support1&Support2&Support3&Resistance1&Resistance2&Resistance3"), // identifies our metrics with a unique name
  InfoMap(MapSN.New), // used to retrieve data from ADE
  Pivot(0), Resistance1(0), Resistance2(0), Resistance3(0), Support1(0), Support2(0), Support3(0);

// Retrieve the info for the current symbol and bar interval into InfoMap
Value1 = ADE.GetBarInfo(Class, GetSymbolName, Interval, ADE.BarID, InfoMap);
// Fetch the values from the InfoMap into variables
Pivot = MapSN.Get(InfoMap, "Pivot");
Resistance1 = MapSN.Get(InfoMap, "Resistance1");
Resistance2 = MapSN.Get(InfoMap, "Resistance2");
Resistance3 = MapSN.Get(InfoMap, "Resistance3");
Support1 = MapSN.Get(InfoMap, "Support1");
Support2 = MapSN.Get(InfoMap, "Support2");
Support3 = MapSN.Get(InfoMap, "Support3");

// Plot them
Plot1( Pivot[1], "PP");
plot2( Resistance1[1], "R1");
Plot3( Resistance2[1], "R2");
Plot4( Resistance3[1], "R3");
Plot5( Support1[1], "S1");
Plot6( Support2[1], "S2");
Plot7( Support3[1], "S3");

 

I did apply the second indicator, but got the following messages:

Error in "ADE Plot MarketDelta"

Company: "Bamboo"

Error location : "ADE"

Error category : "ADE Error"

Short string : "ADE Error"

Source string : "No data available for Class('Pivot&Support1&Support2&Support3&Resistance1&Resistance2&Resistance3'), AC, 60min"

 

How can this work correctly?

Thanks

[Blu-Ray 10]

To get it working correctly, you need to seperate the class string, for example, instead of this :

 

Class("Pivot&Support1&Support2&Support3&Resistance1&Resistance2&Resistance3")

 

change it to this:

 

Vars:
Class("Pivot"),
Class1("Support1"),
Class2("Support2"),

and so on........

 

 

also you would need to number the infomap's too, to match the relevant class's.... for example :

 

Vars:
Class("Pivot"), InfoMap(MapSN.New),
Class1("Support1"), InfoMap1(MapSN.New),
Class2("Support2"), InfoMap2(MapSN.New);


Value1 = MapSN.Put(InfoMap, "Pivot", Pivot );
Value2 = MapSN.Put(InfoMap1, "Support1", Support1 );
Value3 = MapSN.Put(InfoMap2, "Support2", Support2 );

Value4 = ADE.PutBarInfo(Class, GetSymbolName, ADE.BarInterval, ADE.BarID, InfoMap);
Value5 = ADE.PutBarInfo(Class1, GetSymbolName, ADE.BarInterval, ADE.BarID, InfoMap1);
Value6 = ADE.PutBarInfo(Class2, GetSymbolName, ADE.BarInterval, ADE.BarID, InfoMap2);

 

 

Then on the receiving indicator, make sure the variables for the class & infomaps are matched to the send indicator....... and then alter your code so the infomap's match like this :

 

Value1 = ADE.GetBarInfo(Class, GetSymbolName, Interval, ADE.BarID, InfoMap);
Value2 = ADE.GetBarInfo(Class1, GetSymbolName, Interval, ADE.BarID, InfoMap1);
Value3 = ADE.GetBarInfo(Class2, GetSymbolName, Interval, ADE.BarID, InfoMap2);

Pivot = MapSN.Get(InfoMap, "Pivot");
Support1 = MapSN.Get(InfoMap1, "Support1");
Support2 = MapSN.Get(InfoMap2, "Support2");

 

 

Hope this helps

 

Blu-Ray

Edited November 4, 2009 by Blu-Ray

[nuno-online 10]

Blu-Ray,

thank you for your help

 

i changed the code like you suggested to me but i always have the same error

Error in "NR_PivotsADE"

Company: "Bamboo"

Error location : "ADE"

Error category : "ADE Error"

Short string : "ADE Error"

Source string : "No data available for Class 'Pivot', AC, 60min"

 

here is the first indicator:

{ *** NR_Pivots Indicator *** }

Vars: Pivot(0), Resistance1(0), Resistance2(0), Resistance3(0), Support1(0), Support2(0), Support3(0),
     Class("Pivot"), InfoMap(MapSN.New), //used to pass data to ADE
     Class1("Resistance1"), InfoMap1(MapSN.New),
     Class2("Resistance2"), InfoMap2(MapSN.New),
     Class3("Resistance3"), InfoMap3(MapSN.New),
     Class4("Support1"), InfoMap4(MapSN.New),
     Class5("Support2"), InfoMap5(MapSN.New),
     Class6("Support3"), InfoMap6(MapSN.New); 

Pivot = ( Low + High + Close ) / 3;
Resistance1 = ( Pivot * 2 ) - Low;
Resistance2 = Pivot + Range;
Resistance3 = Resistance1 + Range;
Support1 = ( Pivot * 2 ) - High;
Support2 = Pivot - Range;
Support3 = Support1 - Range;

// Put the information we want to store in our InfoMap
Value9 = MapSN.Put(InfoMap, "Pivot", Pivot);
Value1 = MapSN.Put(InfoMap1, "Resistance1", Resistance1);
Value2 = MapSN.Put(InfoMap2, "Resistance2", Resistance2);
Value3 = MapSN.Put(InfoMap3, "Resistance3", Resistance3);
Value4 = MapSN.Put(InfoMap4, "Support1", Support1 );
Value5 = MapSN.Put(InfoMap5, "Support2", Support2);
Value6 = MapSN.Put(InfoMap6, "Support3", Support3);

// Tell ADE to store this info for the current symbol and bar interval
Value10 = ADE.PutBarInfo(Class, GetSymbolName, ADE.BarInterval, ADE.BarID, InfoMap);
Value11 = ADE.PutBarInfo(Class1, GetSymbolName, ADE.BarInterval, ADE.BarID, InfoMap1);
Value12 = ADE.PutBarInfo(Class2, GetSymbolName, ADE.BarInterval, ADE.BarID, InfoMap2);
Value13 = ADE.PutBarInfo(Class3, GetSymbolName, ADE.BarInterval, ADE.BarID, InfoMap3);
Value14 = ADE.PutBarInfo(Class4, GetSymbolName, ADE.BarInterval, ADE.BarID, InfoMap4);
Value15 = ADE.PutBarInfo(Class5, GetSymbolName, ADE.BarInterval, ADE.BarID, InfoMap5);
Value16 = ADE.PutBarInfo(Class6, GetSymbolName, ADE.BarInterval, ADE.BarID, InfoMap6);

Plot1( Pivot[1], "PP");
plot2( Resistance1[1], "R1");
Plot3( Resistance2[1], "R2");
Plot4( Resistance3[1], "R3");
Plot5( Support1[1], "S1");
Plot6( Support2[1], "S2");
Plot7( Support3[1], "S3");

 

the second indicator:

{ *** NR_PivotsADE Indicator *** }

Inputs:
  Interval(60);

Vars: Pivot(0), Resistance1(0), Resistance2(0), Resistance3(0), Support1(0), Support2(0), Support3(0),
     Class("Pivot"), InfoMap(MapSN.New), //used to pass data to ADE
     Class1("Resistance1"), InfoMap1(MapSN.New),
     Class2("Resistance2"), InfoMap2(MapSN.New),
     Class3("Resistance3"), InfoMap3(MapSN.New),
     Class4("Support1"), InfoMap4(MapSN.New),
     Class5("Support2"), InfoMap5(MapSN.New),
     Class6("Support3"), InfoMap6(MapSN.New); 


// Retrieve the info for the current symbol and bar interval into InfoMap
Value9 = ADE.GetBarInfo(Class, GetSymbolName, Interval, ADE.BarID, InfoMap);
Value1 = ADE.GetBarInfo(Class1, GetSymbolName, Interval, ADE.BarID, InfoMap1);
value2 = ADE.GetBarInfo(Class2, GetSymbolName, Interval, ADE.BarID, InfoMap2);
Value3 = ADE.GetBarInfo(Class3, GetSymbolName, Interval, ADE.BarID, InfoMap3);
Value4 = ADE.GetBarInfo(Class4, GetSymbolName, Interval, ADE.BarID, InfoMap4);
Value5 = ADE.GetBarInfo(Class5, GetSymbolName, Interval, ADE.BarID, InfoMap5);
Value6 = ADE.GetBarInfo(Class6, GetSymbolName, Interval, ADE.BarID, InfoMap6);

// Fetch the values from the InfoMap into variables
Pivot = MapSN.Get(InfoMap, "Pivot");
Resistance1 = MapSN.Get(InfoMap1, "Resistance1");
Resistance2 = MapSN.Get(InfoMap2, "Resistance2");
Resistance3 = MapSN.Get(InfoMap3, "Resistance3");
Support1 = MapSN.Get(InfoMap4, "Support1");
Support2 = MapSN.Get(InfoMap5, "Support2");
Support3 = MapSN.Get(InfoMap6, "Support3");


// Plot them
Plot1( Pivot[1], "PP");
plot2( Resistance1[1], "R1");
Plot3( Resistance2[1], "R2");
Plot4( Resistance3[1], "R3");
Plot5( Support1[1], "S1");
Plot6( Support2[1], "S2");
Plot7( Support3[1], "S3");

 

How can this work correctly?

Thanks

 

Nuno

[Blu-Ray 10]

Nuno

 

What time framed charts are you putting these on, so I can test it out.

 

Cheers

 

Blu-Ray

[nuno-online 10]

i want to plot yesterday daily Pivot , supports an resistances in 60 min Chart

 

I inserted the first indicator 'NR_Pivots Indicator' in a daily chart

 

and the second indicator 'NR_PivotsADE Indicator' in a 60 min chart

 

 

in the NR_PivotsADE Indicator is the imput correct?

 

{ *** NR_PivotsADE Indicator *** }

 

Inputs:

Interval(60);

 

 

Nuno

[Blu-Ray 10]

On your first indicator , replace the words ADE.BarInterval to ADE.Daily in these lines

 

Value10 = ADE.PutBarInfo(Class, GetSymbolName, ADE.BarInterval, ADE.BarID, InfoMap);


to

Value10 = ADE.PutBarInfo(Class, GetSymbolName, ADE.Daily, ADE.BarID, InfoMap);

 

and on your second indicator replace the word interval to ADE.Daily like this :

 

Value9 = ADE.GetBarInfo(Class, GetSymbolName, Interval, ADE.BarID, InfoMap);

to

Value9 = ADE.GetBarInfo(Class, GetSymbolName, ADE.Daily, ADE.BarID, InfoMap);

 

 

This should work okay.

 

Just out of curiosity, why are you using ADE for the pivots when you could get the same results using a normal pivot point indicator ...... or are you just wanting to learn about ADE ?

 

Cheers

 

Blu-Ray

[nuno-online 10]

Blu-Ray

1/

the Long term chart is my daily chart (the exporting chart)

the Short term chart is my 60 min chart, (the importing chart)

 

2/

I will try your example.

Can you explain me why was incorrect in my code

why:

- On your first indicator , replace the words ADE.BarInterval to ADE.Daily

- on your second indicator replace the word interval to ADE.Daily

 

3/

"Just out of curiosity, why are you using ADE for the pivots when you could get the same results using a normal pivot point indicator ...... or are you just wanting to learn about ADE ?"

I want to learn about ADE and how importing daily values in a 60 min chart without ADE

 

Nuno

[Blu-Ray 10]

Blu-Ray

1/

the Long term chart is my daily chart (the exporting chart)

the Short term chart is my 60 min chart, (the importing chart)

 

2/

I will try your example.

Can you explain me why was incorrect in my code

why:

- On your first indicator , replace the words ADE.BarInterval to ADE.Daily

- on your second indicator replace the word interval to ADE.Daily

 

 

With ADE.BarInterval it is looking at the exporting chart for a number based in minutes, but since the exporting chart is a daily, it's not based in minutes, hence the reason they made the function ADE.Daily.

 

 

3/

"Just out of curiosity, why are you using ADE for the pivots when you could get the same results using a normal pivot point indicator ...... or are you just wanting to learn about ADE ?"

I want to learn about ADE and how importing daily values in a 60 min chart without ADE

 

Nuno

 

Good to hear your keen to learn about ADE.

 

The reason I was asking is because on certain things, for example daily pivots, you can get that information straight from a 60 min chart using the H,L,C from the previous days worth of data like the floor pivots indicators does.

 

Cheers

 

Blu-Ray

[nuno-online 10]

Thank you VERY MUCH Blu-Ray

 

 

Nuno