Jump to content

Welcome to the new Traders Laboratory! Please bear with us as we finish the migration over the next few days. If you find any issues, want to leave feedback, get in touch with us, or offer suggestions please post to the Support forum here.

  • Welcome Guests

    Welcome. You are currently viewing the forum as a guest which does not give you access to all the great features at Traders Laboratory such as interacting with members, access to all forums, downloading attachments, and eligibility to win free giveaways. Registration is fast, simple and absolutely free. Create a FREE Traders Laboratory account here.

ed16888

Pivots Alerts on Radar Screen

Recommended Posts

I daytrade and I use 144 tick chart on the radar screen, I was just wondering if there is such a alert that I can set up in the radar screen that monitors stocks' pivots and gives you alerts like AAPL broke R1 or like AAPL reversing from R1, things like that.

Share this post


Link to post
Share on other sites

It sounds like you are using floor pivots but there are others such as Camarilla and DeMark. I do use Radarscreen with pivots but it is for use with Forex. I don't have specific alerts for when price breaks a pivot level but I do have colour changes on the background when price gets close to a pivot level. For me I have daily, weekly and monthly time frames using Floor, Camarilla and DeMark Pivots. I look for a confluence of pivots and then use price action to take a trade.

 

Here is a screenshot of my RS set up.

 

 

Paul

rs.jpg.550fe1cc77629a84424eca71ad68441d.jpg

Share this post


Link to post
Share on other sites
I daytrade and I use 144 tick chart on the radar screen, I was just wondering if there is such a alert that I can set up in the radar screen that monitors stocks' pivots and gives you alerts like AAPL broke R1 or like AAPL reversing from R1, things like that.

 

 

I am sure it has been done already, tho I haven't seen it...

 

if you can write the spec... and make a screen mock up (with notes), I am sure something can be arranged.

Share this post


Link to post
Share on other sites

Hey Paul, I do use floor pivots on the radar screen, however I don't see anywhere I can adjust the backgound colors when the price gets close, what indicator are you using? do you mind sharing it with me, thanks in advance..

 

Ed.

Share this post


Link to post
Share on other sites

The background colours are a line of code when price approaches the pivot point. I wrote the indicator myself but it is specific to how I use them. I will take another look at it and see what changes may be needed to make it easier for others to use. I only use R1, PP and S1 for floor pivots and I know others use R2 and S2 as well.

 

 

Paul

Share this post


Link to post
Share on other sites

here is a screenshot of my radar screen, is there a way to add alerts to my pivots when the price cross or near. I also attached the floor trader eld that I use, can anyone help?below is the pivots indicator that I use, any programmer out there can assists?

 

{

Applies to daily, intra-day, and tick bar charts only.

 

Plots lines at floor trader pivot levels, based on the following formulae:

 

Resistance Level 3 = R3 = R2 + YestHigh - YestLow

Resistance Level 2 = R2 = PP + YestHigh - YestLow

Resistance Level 1 = R1 = PP * 2 - YestLow

PivotPoint = PP = ( YestHigh + YestLow + YestClose ) / 3

Support Level 1 = S1 = PP * 2 - YestHigh

Support Level 2 = S2 = PP - YestHigh + YestLow

Support Level 3 = S3 = S2 - YestHigh + YestLow

 

Input specifies whether R3 and S3 are plotted in addition to the 5 lines at PP, S1,

S2, R1, and R2.

}

 

inputs:

Plot_5or7( 5 ) ; { if 7, adds plots for S3 and R3 to other 5 lines }

 

variables:

S1( 0 ),

S2( 0 ),

S3( 0 ),

R1( 0 ),

R2( 0 ),

R3( 0 ),

PP( 0 ),

TodaysHigh( 0 ),

YestHigh( 0 ),

TodaysLow( 0 ),

YestLow( 0 ),

TodaysClose( 0 ),

YestClose( 0 ),

Counter( 0 ) ;

 

if Date <> Date[1] then

begin

{ increment Counter to be sure enough data is processed - see comment below }

Counter = Counter + 1 ;

YestHigh = TodaysHigh ;

YestLow = TodaysLow ;

YestClose = Close[1] ;

TodaysHigh = High ;

TodaysLow = Low ;

PP = ( YestHigh + YestLow + YestClose ) / 3 ;

R1 = PP * 2 - YestLow ;

R2 = PP + YestHigh - YestLow ;

R3 = R2 + YestHigh - YestLow ;

S1 = PP * 2 - YestHigh ;

S2 = PP - YestHigh + YestLow ;

S3 = S2 - YestHigh + YestLow ;

end

else

begin

if High > TodaysHigh then

TodaysHigh = High ;

if Low < TodaysLow then

TodaysLow = Low ;

end ;

 

if Counter >= 2 and BarType < 3 then { if at least one full day's data has been

processed and chart bar interval is daily, intra-day, or tick bar then plot }

begin

if Plot_5or7 = 7 then

Plot1( R3, "R3" ) ;

Plot2( R2, "R2" ) ;

Plot3( R1, "R1" ) ;

Plot4( PP, "PP" ) ;

Plot5( S1, "S1" ) ;

Plot6( S2, "S2" ) ;

if Plot_5or7 = 7 then

Plot7( S3, "S3" ) ;

end ;

rs.thumb.JPG.31c24168b3b3a396bee0d2dff6ddcf25.JPG

Share this post


Link to post
Share on other sites
is there a way to add alerts to my pivots when the price cross or near.

 

Hi Ed

 

To do Alerts on a break of a pivot you would need to add these two lines to each pivot :

 

If Close crosses above PP then Alert( Getsymbolname +" crossed above PP");

If Close crosses below PP then Alert( Getsymbolname +" crossed below PP");

 

As for price getting near a pivot... well you would have to define "near" in terms of ticks then create a threshold around each pivot.... for example

 

Inputs:

Threshold (5);

 

Vars:

mintick(0),PPuppthresh(0),PPlwrthresh(0);

 

Mintick = minmove/pricescale;

 

PPuppthresh = PP + (Threshold*mintick);

PPlwrthresh = PP - (Threshold*mintick);

 

Then you would insert the two alert lines like shown above but change the setting to the threshold...

 

If Close crosses above PPlwrthresh then Alert( Getsymbolname +" just under PP");

If Close crosses below PPuppthresh then Alert( Getsymbolname +" just above PP");

 

.... and again, repeat for every pivot.

 

 

This should get you on your way.

 

Hope this helps

 

Blu-Ray

Share this post


Link to post
Share on other sites

Depending if you run your code intrabar or on closed tick of bar, you may need to use a slightly different code.

 

If intrabar then use code in my last post or if used on closed tick of a bar use something like this :

 

 

Condition1 = Close crosses above PP;

 

If Condition1 then Alert( Getsymbolname +" crossed above PP");

 

Condition2 = Close crosses below PP;

 

If Condition2 then Alert( Getsymbolname +" crossed below PP");

 

Condition3 = Close crosses above PPlwrthresh;

 

If Condition3 and Condition1 = false then Alert( Getsymbolname +" just under PP");

 

Condition4 = Close crosses below PPuppthresh;

 

If Condition4 and Condition2 = false then Alert( Getsymbolname +" just above PP");

 

 

This would eliminate getting alerts of " just under PP" and "crossed above PP" on the same bar.

 

Hope this helps

 

Blu-Ray

Share this post


Link to post
Share on other sites

Blu Ray , thanks for the quick reply, I really appreciate your hard work, I ran my code intrabar, I added the code you discribe, the alert on the cross is fine, but the near does not seems to be working, 5 ticks above and below should be fine, here is what I did, can you see where the errors at, thanks again...

 

{

Applies to daily, intra-day, and tick bar charts only.

 

Plots lines at floor trader pivot levels, based on the following formulae:

 

Resistance Level 3 = R3 = R2 + YestHigh - YestLow

Resistance Level 2 = R2 = PP + YestHigh - YestLow

Resistance Level 1 = R1 = PP * 2 - YestLow

PivotPoint = PP = ( YestHigh + YestLow + YestClose ) / 3

Support Level 1 = S1 = PP * 2 - YestHigh

Support Level 2 = S2 = PP - YestHigh + YestLow

Support Level 3 = S3 = S2 - YestHigh + YestLow

 

Input specifies whether R3 and S3 are plotted in addition to the 5 lines at PP, S1,

S2, R1, and R2.

}

 

inputs:

Plot_5or7( 5 ) ; { if 7, adds plots for S3 and R3 to other 5 lines }

Inputs:

Threshold (6);

 

 

 

 

variables:

S1( 0 ),

S2( 0 ),

S3( 0 ),

R1( 0 ),

R2( 0 ),

R3( 0 ),

PP( 0 ),

TodaysHigh( 0 ),

YestHigh( 0 ),

TodaysLow( 0 ),

YestLow( 0 ),

TodaysClose( 0 ),

YestClose( 0 ),

Counter( 0 ) ;

Vars:

mintick(0),PPuppthresh(0) ,PPlwrthresh(0) ,R1uppthresh(0) ,R1lwrthresh(0) ,R2uppthresh(0) ,R2lwrthresh(0) ,S1uppthresh(0) ,S1lwrthresh(0) ,S2uppthresh(0) ,S2lwrthresh(0);

 

 

 

 

if Date <> Date[1] then

begin

{ increment Counter to be sure enough data is processed - see comment below }

Counter = Counter + 1 ;

YestHigh = TodaysHigh ;

YestLow = TodaysLow ;

YestClose = Close[1] ;

TodaysHigh = High ;

TodaysLow = Low ;

PP = ( YestHigh + YestLow + YestClose ) / 3 ;

R1 = PP * 2 - YestLow ;

R2 = PP + YestHigh - YestLow ;

R3 = R2 + YestHigh - YestLow ;

S1 = PP * 2 - YestHigh ;

S2 = PP - YestHigh + YestLow ;

S3 = S2 - YestHigh + YestLow ;

end

else

begin

if High > TodaysHigh then

TodaysHigh = High ;

if Low < TodaysLow then

TodaysLow = Low ;

end ;

 

if Counter >= 2 and BarType < 3 then { if at least one full day's data has been

processed and chart bar interval is daily, intra-day, or tick bar then plot }

begin

if Plot_5or7 = 7 then

Plot1( R3, "R3" ) ;

Plot2( R2, "R2" ) ;

Plot3( R1, "R1" ) ;

Plot4( PP, "PP" ) ;

Plot5( S1, "S1" ) ;

Plot6( S2, "S2" ) ;

if Plot_5or7 = 7 then

Plot7( S3, "S3" ) ;

 

Mintick = minmove/pricescale;

 

PPuppthresh = PP + (Threshold*mintick);

PPlwrthresh = PP - (Threshold*mintick);

R1uppthresh = R1 + (Threshold*mintick);

R1lwrthresh = R1 - (Threshold*mintick);

R2uppthresh = R2 + (Threshold*mintick);

R2lwrthresh = R2 - (Threshold*mintick);

S1uppthresh = S1 + (Threshold*mintick);

S1lwrthresh = S1 - (Threshold*mintick);

S2uppthresh = S2 + (Threshold*mintick);

S2lwrthresh = S2 - (Threshold*mintick);

 

 

If Close crosses above PP then Alert( Getsymbolname +" crossed above PP");

If Close crosses below PP then Alert( Getsymbolname +" crossed below PP");

If Close crosses above R1 then Alert( Getsymbolname +" crossed above R1");

If Close crosses below R1 then Alert( Getsymbolname +" crossed below R1");

If Close crosses above R2 then Alert( Getsymbolname +" crossed above R2");

If Close crosses below R2 then Alert( Getsymbolname +" crossed below R2");

If Close crosses above S1 then Alert( Getsymbolname +" crossed above S1");

If Close crosses below S1 then Alert( Getsymbolname +" crossed below S1");

If Close crosses above S2 then Alert( Getsymbolname +" crossed above S2");

If Close crosses below S2 then Alert( Getsymbolname +" crossed below S2");

If Close crosses above PPlwrthresh then Alert( Getsymbolname +" just under PP");

If Close crosses below PPuppthresh then Alert( Getsymbolname +" just above PP");

If Close crosses above R1lwrthresh then Alert( Getsymbolname +" just under R1");

If Close crosses below R1uppthresh then Alert( Getsymbolname +" just above R1");

If Close crosses above R2lwrthresh then Alert( Getsymbolname +" just under R2");

If Close crosses below R2uppthresh then Alert( Getsymbolname +" just above R2");

If Close crosses above S1lwrthresh then Alert( Getsymbolname +" just under S1");

If Close crosses below S1uppthresh then Alert( Getsymbolname +" just above S1");

If Close crosses above S2lwrthresh then Alert( Getsymbolname +" just under S2");

If Close crosses below S2uppthresh then Alert( Getsymbolname +" just above S2");

 

End ;

Share this post


Link to post
Share on other sites

ed16888,

 

Blu Ray has a much better understanding of your coding needs than I do as I am not that experienced in it. Also you are using a later version of TS than I am which would also makes it more difficult for coding your needs

 

Good Luck.

 

 

Paul

Share this post


Link to post
Share on other sites
Blu Ray , thanks for the quick reply, I really appreciate your hard work, I ran my code intrabar, I added the code you discribe, the alert on the cross is fine, but the near does not seems to be working, 5 ticks above and below should be fine, here is what I did, can you see where the errors at, thanks again...

 

Inputs:

Threshold (6);

 

Ed

 

I've tested it and it works fine for me, the only thing I can think of is that you've set your inputs to 6 ticks away instead of 5.

 

Cheers

 

Blu-Ray

Share this post


Link to post
Share on other sites
here is a screenshot of my radar screen, is there a way to add alerts to my pivots when the price cross or near. I also attached the floor trader eld that I use, can anyone help?below is the pivots indicator that I use, any programmer out there can assists?

 

{

Applies to daily, intra-day, and tick bar charts only.

 

Plots lines at floor trader pivot levels, based on the following formulae:

 

Resistance Level 3 = R3 = R2 + YestHigh - YestLow

Resistance Level 2 = R2 = PP + YestHigh - YestLow

Resistance Level 1 = R1 = PP * 2 - YestLow

PivotPoint = PP = ( YestHigh + YestLow + YestClose ) / 3

Support Level 1 = S1 = PP * 2 - YestHigh

Support Level 2 = S2 = PP - YestHigh + YestLow

Support Level 3 = S3 = S2 - YestHigh + YestLow

 

Input specifies whether R3 and S3 are plotted in addition to the 5 lines at PP, S1,

S2, R1, and R2.

}

 

inputs:

Plot_5or7( 5 ) ; { if 7, adds plots for S3 and R3 to other 5 lines }

 

variables:

S1( 0 ),

S2( 0 ),

S3( 0 ),

R1( 0 ),

R2( 0 ),

R3( 0 ),

PP( 0 ),

TodaysHigh( 0 ),

YestHigh( 0 ),

TodaysLow( 0 ),

YestLow( 0 ),

TodaysClose( 0 ),

YestClose( 0 ),

Counter( 0 ) ;

 

if Date <> Date[1] then

begin

{ increment Counter to be sure enough data is processed - see comment below }

Counter = Counter + 1 ;

YestHigh = TodaysHigh ;

YestLow = TodaysLow ;

YestClose = Close[1] ;

TodaysHigh = High ;

TodaysLow = Low ;

PP = ( YestHigh + YestLow + YestClose ) / 3 ;

R1 = PP * 2 - YestLow ;

R2 = PP + YestHigh - YestLow ;

R3 = R2 + YestHigh - YestLow ;

S1 = PP * 2 - YestHigh ;

S2 = PP - YestHigh + YestLow ;

S3 = S2 - YestHigh + YestLow ;

end

else

begin

if High > TodaysHigh then

TodaysHigh = High ;

if Low < TodaysLow then

TodaysLow = Low ;

end ;

 

if Counter >= 2 and BarType < 3 then { if at least one full day's data has been

processed and chart bar interval is daily, intra-day, or tick bar then plot }

begin

if Plot_5or7 = 7 then

Plot1( R3, "R3" ) ;

Plot2( R2, "R2" ) ;

Plot3( R1, "R1" ) ;

Plot4( PP, "PP" ) ;

Plot5( S1, "S1" ) ;

Plot6( S2, "S2" ) ;

if Plot_5or7 = 7 then

Plot7( S3, "S3" ) ;

end ;

How did you get the Squeeze on the Radar ?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Topics

  • Posts

    • Thx for reminding us... I don't bang that drum often enough anymore Another part for consideration is who that money initially went to...
    • TDUP ThredUp stock, watch for a top of range breakout above 2.94 at https://stockconsultant.com/?TDUP
    • How long does it take to receive HFM's withdrawal via Skrill? less than 24H?
    • My wife Robin just wanted some groceries.   Simple enough.   She parked the car for fifteen minutes, and returned to find a huge scratch on the side.   Someone keyed her car.   To be clear, this isn’t just any car.   It’s a Cybertruck—Elon Musk's stainless-steel spaceship on wheels. She bought it back in 2021, before Musk became everyone's favorite villain or savior.   Someone saw it parked in a grocery lot and felt compelled to carve their hatred directly into the metal.   That's what happens when you stand out.   Nobody keys a beige minivan.   When you're polarizing, you're impossible to ignore. But the irony is: the more attention something has, the harder it is to find the truth about it.   What’s Elon Musk really thinking? What are his plans? What will happen with DOGE? Is he deserving of all of this adoration and hate? Hard to say.   Ideas work the same way.   Take tariffs, for example.   Tariffs have become the Cybertrucks of economic policy. People either love them or hate them. Even if they don’t understand what they are and how they work. (Most don’t.)   That’s why, in my latest podcast (link below), I wanted to explore the “in-between” truth about tariffs.   And like Cybertrucks, I guess my thoughts on tariffs are polarizing.   Greg Gutfield mentioned me on Fox News. Harvard professors hate me now. (I wonder if they also key Cybertrucks?)   But before I show you what I think about tariffs… I have to mention something.   We’re Headed to Austin, Texas This weekend, my team and I are headed to Austin. By now, you should probably know why.   Yes, SXSW is happening. But my team and I are doing something I think is even better.   We’re putting on a FREE event on “Tech’s Turning Point.”   AI, quantum, biotech, crypto, and more—it’s all on the table.   Just now, we posted a special webpage with the agenda.   Click here to check it out and add it to your calendar.   The Truth About Tariffs People love to panic about tariffs causing inflation.   They wave around the ghost of the Smoot-Hawley Tariff from the Great Depression like it’s Exhibit A proving tariffs equal economic collapse.   But let me pop this myth:   Tariffs don’t cause inflation. And no, I'm not crazy (despite what angry professors from Harvard or Stanford might tweet at me).   Here's the deal.   Inflation isn’t when just a couple of things become pricier. It’s when your entire shopping basket—eggs, shirts, Netflix subscriptions, bananas, everything—starts costing more because your money’s worth less.   Inflation means your dollars aren’t stretching as far as they used to.   Take the 1800s.   For nearly a century, 97% of America’s revenue came from tariffs. Income tax? Didn’t exist. And guess what inflation was? Basically zero. Maybe 1% a year.   The economy was booming, and tariffs funded nearly everything. So, why do people suddenly think tariffs cause inflation today?   Tariffs are taxes on imports, yes, but prices are set by supply and demand—not tariffs.   Let me give you a simple example.   Imagine fancy potato chips from Canada cost $10, and a 20% tariff pushes that to $12. Everyone panics—prices rose! Inflation!   Nope.   If I only have $100 to spend and the price of my favorite chips goes up, I either stop buying chips or I buy, say, fewer newspapers.   If everyone stops buying newspapers because they’re overspending on chips, newspapers lower their prices or go out of business.   Overall spending stays the same, and inflation doesn’t budge.   Three quick scenarios:   We buy pricier chips, but fewer other things: Inflation unchanged. Manufacturers shift to the U.S. to avoid tariffs: Inflation unchanged (and more jobs here). We stop buying fancy chips: Prices drop again. Inflation? Still unchanged. The only thing that actually causes inflation is printing money.   Between 2020 and 2022 alone, 40% of all money ever created in history appeared overnight.   That’s why inflation shot up afterward—not because of tariffs.   Back to tariffs today.   Still No Inflation Unlike the infamous Smoot-Hawley blanket tariff (imagine Oprah handing out tariffs: "You get a tariff, and you get a tariff!"), today's tariffs are strategic.   Trump slapped tariffs on chips from Taiwan because we shouldn’t rely on a single foreign supplier for vital tech components—especially if that supplier might get invaded.   Now Taiwan Semiconductor is investing $100 billion in American manufacturing.   Strategic win, no inflation.   Then there’s Canada and Mexico—our friendly neighbors with weirdly huge tariffs on things like milk and butter (299% tariff on butter—really, Canada?).   Trump’s not blanketing everything with tariffs; he’s pressuring trade partners to lower theirs.   If they do, everybody wins. If they don’t, well, then we have a strategic trade chess game—but still no inflation.   In short, tariffs are about strategy, security, and fairness—not inflation.   Yes, blanket tariffs from the Great Depression era were dumb. Obviously. Today's targeted tariffs? Smart.   Listen to the whole podcast to hear why I think this.   And by the way, if you see a Cybertruck, don’t key it. Robin doesn’t care about your politics; she just likes her weird truck.   Maybe read a good book, relax, and leave cars alone.   (And yes, nobody keys Volkswagens, even though they were basically created by Hitler. Strange world we live in.) Source: https://altucherconfidential.com/posts/the-truth-about-tariffs-busting-the-inflation-myth    Profits from free accurate cryptos signals: https://www.predictmag.com/       
    • No, not if you are comparing apples to apples. What we call “poor” is obviously a pretty high bar but if you’re talking about like a total homeless shambling skexie in like San Fran then, no. The U.S.A. in not particularly kind to you. It is not an abuse so much as it is a sad relatively minor consequence of our optimism and industriousness.   What you consider rich changes with circumstances obviously. If you are genuinely poor in the U.S.A., you experience a quirky hodgepodge of unhelpful and/or abstract extreme lavishnesses while also being alienated from your social support network. It’s about the same as being a refugee. For a fraction of the ‘kindness’ available to you in non bio-available form, you could have simply stayed closer to your people and been MUCH better off.   It’s just a quirk of how we run the place and our values; we are more worried about interfering with people’s liberty and natural inclination to do for themselves than we are about no bums left behind. It is a slightly hurtful position and we know it; we are just scared to death of socialism cancer and we’re willing to put our money where our mouth is.   So, if you’re a bum; you got 5G, the ER will spend like $1,000,000 on you over a hangnail but then kick you out as soon as you’re “stabilized”, the logistics are surpremely efficient, you have total unchecked freedom of speech, real-estate, motels, and jobs are all natural healthy markets in perfect competition, you got compulsory three ‘R’’s, your military owns the sky, sea, space, night, information-space, and has the best hairdos, you can fill out paper and get all the stuff up to and including a Ph.D. Pretty much everything a very generous, eager, flawless go-getter with five minutes to spare would think you might need.   It’s worse. Our whole society is competitive and we do NOT value or make any kumbaya exception. The last kumbaya types we had werr the Shakers and they literally went extinct. Pueblo peoples are still around but they kind of don’t count since they were here before us. So basically, if you’re poor in the U.S.A., you are automatically a loser and a deadbeat too. You will be treated as such by anybody not specifically either paid to deal with you or shysters selling bejesus, Amway, and drugs. Plus, it ain’t safe out there. Not everybody uses muhfreedoms to lift their truck, people be thugging and bums are very vulnerable here. The history of a large mobile workforce means nobody has a village to go home to. Source: https://askdaddy.quora.com/Are-the-poor-people-in-the-United-States-the-richest-poor-people-in-the-world-6   Profits from free accurate cryptos signals: https://www.predictmag.com/ 
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.