Jump to content

Welcome to the new Traders Laboratory! Please bear with us as we finish the migration over the next few days. If you find any issues, want to leave feedback, get in touch with us, or offer suggestions please post to the Support forum here.

  • Welcome Guests

    Welcome. You are currently viewing the forum as a guest which does not give you access to all the great features at Traders Laboratory such as interacting with members, access to all forums, downloading attachments, and eligibility to win free giveaways. Registration is fast, simple and absolutely free. Create a FREE Traders Laboratory account here.

Recommended Posts

I didn't take that retracement at 0933 for two reasons:

 

1- We are to close to the Resistance line at 2564.

 

But you have no way of knowing in RT whether R is going to be a problem or not. What if price were to sail right through it? You'd just be watching, making no money. At worst, you'd be out at BE. At best, maybe a couple of points. But at least you'd be engaging the market. And following your plan.

 

2- I didn't think the RET would allow for a small enough Stop.

 

Since you pegged R at 55, correctly, there's no reason why you can't put your stop there. This is much different from taking a RET that occurs after an extended run and putting your stop under the RET rather than under the turning point (2). It will almost surely be hit.

 

Instead I took the short at 0939 for the following:

 

1- Climactic volume at 0937 followed by a lower high and a dry-up in volume

2- I had anticipated ressitance at 2564 and was biased towards the short-side from the start the day.

 

And all of that is fine. Except for the bias part. Lose that. But none of that has anything to do with taking the long in the first place. You would have served yourself better by thinking how you would take the short if you were in the long at the time. That takes a bit more agility, though not much.

 

I considered entry #2 but was still thinking of the short...

 

Again, the past is past. You can't trade the past. Thinking about the past while you're assessing the situation or, worse, in a trade, will immobilize you.

 

As for the short at 2570, I didn't consider it because I hadn't considered 2570 as potential resistance. Did I miss this level?

 

I wouldn't say missed it, but the S/R lines I've been drawing have been at 65-68.

 

This chart may be helpful. Or not.

 

You're in at the green dot. You take your first profit at the break of the demand line. You take the rest at BE.

 

Then the short. In this case, you can enter at the LH, which you would probably do anyway if you weren't incorporating the TICKQ. If there is no LH, then you're pretty much stuck, unless you do an SAR, which I suggest you postpone indefinitely. If you do have an op to short, you will likely draw the supply line in your head. This isn't the time to be futzing around with lines. When you hit S, you have some choices to make. Do you follow your plan or dump everything and wait for a long entry? In this case, there are several acceptable long entries (the three green dots). Of course, the longer you wait, the farther you are from your stop. That's a choice you have to make. But you've got at least 6-8 pts by now, so it isn't as if you're trying to trade out of a hole. These are the informed risks one sometimes has to take.

 

Then you get to R. First exit at the break of the DL, second at the LH. And so on.

 

Db

 

attachment.php?attachmentid=29631&stc=1&d=1340813038

Image37.jpg.42f6cf36944629e2a236be9b113c53a1.jpg

Share this post


Link to post
Share on other sites

I am leaving the NQ for today, thanks for posting all of this in real time, following your comments has been very interesting.

 

I will go through these in detail and with more time. I have a lot to think about and my biggest problem today has been my urge to improvise and not follow my plan. If I had done the latter I would've finished the day with a nice proffit.

 

Cheers maese, will try n learn from today....

Share this post


Link to post
Share on other sites
I am leaving the NQ for today, thanks for posting all of this in real time, following your comments has been very interesting.

 

I will go through these in detail and with more time. I have a lot to think about and my biggest problem today has been my urge to improvise and not follow my plan. If I had done the latter I would've finished the day with a nice proffit....

 

This is always a problem when one thinks he knows more than his plan. I guess it depends on whether the plan is just an exercise or if it's a vigorous, robust plan of attack. I can't answer that one for you.

 

Improvisation is often necessary. Today was a good example of that. But being able to improvise and being able to follow a strategy are equally important. Improvisation may often be necessary, but it should not be your default position.

 

Db

Share this post


Link to post
Share on other sites

Technically, this ought to go in the TICKQ thread, but without the context (today's posts here), it wouldn't make much sense.

 

I post this here to show (a) how the T may or may not have been helpful and (b) that the T is anything but a magic bullet.

 

For me, I see little that is helpful here. If I had a short on the way down and were exiting it at S, the behavior of the T would give me a bit of added confidence if I wanted to enter a long, a bit late, at 53 or 54 or even 55. Or not. Now we're talking hindsight, so who can say for sure?

 

But as for the third/fourth arrow, yes. That, along with the near parabolic rise up into the R zone, screams "lighten up".

 

So not always helpful, but helpful enough.

 

Db

 

attachment.php?attachmentid=29638&stc=1&d=1340818377

Image39.thumb.jpg.9a15a4c96fb24389547d4a2976aeb16f.jpg

Share this post


Link to post
Share on other sites

So what now? We are approaching the Red Resistance Line at 2620, are you considering a short if price is rejected around this area?

 

I think it would be very useful for everyone if you'd share your thoughts and entries in Foresight.

Share this post


Link to post
Share on other sites

Thursday and Friday were two very strong trend days that lead to a 100 point advance.

 

We are currently inside the tranding range from the 20th to the 22nd of June, which

is inside that large March Trading range, highligted with a rectangle, traders have been comfortable in this price range in the past. After such an advance, we can anticipate a period of consolidation, or not....

 

My thoughts for today, playing S/R

 

Go long:

 

Test of support (old resistance) around 2605

Breakout of 2626 (wait for a retracement)

 

Go short

 

Rejection of 2525-26

Breakdown of 2605 (wait for a retracement)

5aa71112aecf9_NQ2-07.thumb.png.a383ad0847521997eaab997c28e84a7d.png

Share this post


Link to post
Share on other sites
So what now? We are approaching the Red Resistance Line at 2620, are you considering a short if price is rejected around this area?

 

I think it would be very useful for everyone if you'd share your thoughts and entries in Foresight.

 

A short at rejection of R is SOP, though if one were long (chart 4), he'd have to SAR.

 

There's really nothing to think about. R is at 2620+/- and S is at 2500+/-. Thinking about it too much generally leads to an inability to move.

 

As for entries and exits, possibilities are noted on the above charts. Again they are SOP and should be consistent with all the other charts posted in the Forum.

 

Db

Share this post


Link to post
Share on other sites

I'm bumping this thread for several reasons: (1) there's been a lot of talk about breakouts, retracements, and reversals lately, (2) there's too much good information in this thread for it to be so far down on the list, (3) I want to reiterate and re-emphasize what I've said several times in this thread, beginning with post #2, which is that one must use a small bar interval -- preferably 1m or less -- in order to see the retracements that nearly always occur after breakouts. One cannot very well trade what one cannot see, and a 5m bar interval isn't going to do you any good at all. This was the case not only this morning but on nearly every morning.

 

If you're going to trade price, you have to be able to see it move, and that means left to right, not up and down in a 5m -- or 10 or 15 or whatever -- bar as if it were on a trampoline. If you're trading a longer bar interval than 1m, then you're behind, and if you're behind, then you have to play catch up, and being in that position is prime opportunity for making bad decisions.

 

Knowing what to look for is only part of it. You also have to be able to see it. If you can't see it, you can't trade it. And if you're not trading it, then what is all of this for?

 

Db

Share this post


Link to post
Share on other sites
...

If you're going to trade price, you have to be able to see it move, and that means left to right, not up and down in a 5m -- or 10 or 15 or whatever -- bar as if it were on a trampoline. If you're trading a longer bar interval than 1m, then you're behind, and if you're behind, then you have to play catch up, and being in that position is prime opportunity for making bad decisions....

Db

 

I respectfully suggest that there is an equal amount of information contained in the 5m and 30m bars... only different. And if you just are trying to keep up with the rapid movements of a 1m bar then you are likely to make rushed and poor decisions.

 

My only concern is that my entry is timed correctly and in the direction that the market is going to move. My observations have demonstrated that some longer timeframe bars are very good to use for entry when momentum supports it. I do not believe that larger volume traders base their decisions on a 1minute timeframe.

 

I can't elaborate too much now because I am away from my trading computer and using my tablet so my fingers are getting tired.

 

I'll try to demonstrate what I mean tomorrow if you have any interest in discussing it.

Have. A nice holiday

Share this post


Link to post
Share on other sites

What larger volume traders base their decisions on is not necessarily pertinent to the small volume trader at home. The little guy can't trade what he can't see, and there's too much that can't be seen in a large interval bar. If he feels "rushed" and/or is making "poor decisions", he very likely doesn't know what he's looking for and/or doesn't know what to do with it if and when he sees it.

 

Db

Share this post


Link to post
Share on other sites

It seems to me that it depends what you are trying to trade. And thus the market's speed of development determines what is noise and what is useful structure.

 

I like longer timeframe for working the slow development periods, and like db, short timeframes for confirming thrusting action.

Share this post


Link to post
Share on other sites

My observation has been that breakouts of major levels will often get tested in multiple timeframes. For instance a breakout of a multi-day high, will often be tested on the initial break (need a fast chart to see the pullback), however, you then later see another test on a 5 or a 15 minute chart (after bigger progression from breakout level) and again on the daily chart (after a multi-day thrust from the breakout level).

 

-bbc

Share this post


Link to post
Share on other sites

Given the age of this thread, I did not expect much response, if any, but I should point out that the thread is part of the Wyckoff Forum. In that context, there is no such thing as "noise", and the preferred chart is that which is as close to the tape as possible. A tick chart, if available. Granted a tick chart takes some getting used to, but it beats the hell out of stating at a T&S display for hours on end.

 

Maintaining the broader view is of course essential. Back in the day, this was done by using a form of P&F. Today we have the luxury of multiple bar intervals, switchable in an instant. But focusing on the bars, and assigning meanings to them that they don't have, puts the cart before the horse. The message is in the tick, and in its continuous movement that results from imbalances between demand and supply. Some may build systems on 5m bars or 13m candles or 967tick bars or whatever, and they may enjoy great success with all that. But none of it has anything to do with Wyckoff. This is not to suggest that W is the only way or even the best way. Just trying to keep interested readers on the same page.

 

Db

Share this post


Link to post
Share on other sites
My observation has been that breakouts of major levels will often get tested in multiple timeframes. For instance a breakout of a multi-day high, will often be tested on the initial break (need a fast chart to see the pullback), however, you then later see another test on a 5 or a 15 minute chart (after bigger progression from breakout level) and again on the daily chart (after a multi-day thrust from the breakout level).

 

-bbc

 

True. This is largely due to the different worlds that traders occupy. The 5m people aren't even aware of the RET on the tick chart. So they wait for a RET on the 5m chart. Ditto with the 15m people. And the 30m people may not see any RET at all until the day's nearly over

 

The problem here from a Wyckoff POV is that the longer one waits to enter after one should have entered, the further he is from his stop. This may decrease the information risk, but it increases the price risk to a level that may be so intolerable to the trader that he doesn't take the trade at all.

 

If one is sure of what he's looking for and is reasonably sure that he's seen it if and when it occurs, there's just no reason to wait. If he takes it and he's wrong, his stop is so close that his price risk is minimal.

 

Db

Share this post


Link to post
Share on other sites
What larger volume traders base their decisions on is not necessarily pertinent to the small volume trader at home. The little guy can't trade what he can't see, and there's too much that can't be seen in a large interval bar. If he feels "rushed" and/or is making "poor decisions", he very likely doesn't know what he's looking for and/or doesn't know what to do with it if and when he sees it.

Db

 

Fair enough, but the small lot trader does not influence the market to any significant degree. So unless he/she has the support of large volume traders entering at the time he/she does, the trade will not go anywhere.

 

I believe that the footprints of larger volume traders are plain to see and can be viewed in any time frame but the ones I prefer are 5 and 30 minute bars. Full disclosure: I also use a 10K volume chart to provide structure which generates a bar every 1 - 4 minutes during the RTH session. But it is the 5 and 30minute bars that provide the evidence needed to support the setup.

Share this post


Link to post
Share on other sites

The Wyckoff trader, however, doesn't seek to influence the market. He seeks to determine where it is and where it is most likely to go, then hitches a ride to take him there. For him this will best be done by following price, not a summary of it.

 

It's good that the larger bar intervals work for you. But they're not the MO for a Wyckoff trader.

 

Db

 

Addendum:

 

Figuratively speaking, the small trader should imagine himself as a hitch-hiker in the market. For the ordinary hitch-hiker, someone else supplies the car, chauffeur, oil and gas. When he thinks the car is about to go in his direction, he jumps aboard and rides as far as he thinks the car will go. When he notices the machine has been stopped by a red light, or is about to turn a corner and go in some other direction, or that the car is running out of gas, or the brakes failing to work properly, he steps off and figures he has secured about as long a ride as he may expect. All he has supplied in this transaction is a modest commission and whatever brains were necessary to observe and recognize the opportunity when to get on and off.

 

RDW

Edited by DbPhoenix
Add quote

Share this post


Link to post
Share on other sites

I trade 1 pip range charts mainly CL and 6E. For me breakout is a key component of everything. I am talking about the breakouts which occurs at it's lowest possible level which is wave breakout. I follow wave breakouts and wave failures to catch intraday (micro) swings.

 

Pure price with no indies or volume.

Share this post


Link to post
Share on other sites

DB,

 

"The Wychoff Method" as I learned it was a stock selection system. A very similar system is presented by VectorVest. I used vectorvest first, and then learned of Wychoff and figured that the creator of vectorvest adpated his system from Wychokk. In a nutshell, as I recall it, it is a tops down approach to selecting stocks where you begin by determining market direction, then finding the strongest moving industries (or sectors) and then selecting the best stocks, given technical and fundamental analysis.

 

So, when Wychoff is referenced, are we referencing a bastardized version of Wychoff or is there another version of Wychoff that I am unfamiliar with that does not lead to the selection of stocks?

Edited by DbPhoenix

Share this post


Link to post
Share on other sites

The Forum focuses on the original course (see the Stickies). The process of determining what to trade and when to trade it is detailed therein.

 

Db

Edited by DbPhoenix

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By vishnux
      Hey guys , what are the main things you look for to detect if the consolidation area is accumulating or distributing ? 
      1 ) I see springs in top , still markup happens and it becomes accumulation area and vice versa
      2) There is lots of volume absorption in support line and still markdown occurs.
      3) sometimes in market high / low it becomes re-accumulation  / re-distribution
      Is there any clear way to find it ? 
    • By millonmethod
      Hello everyone!
      I am an advanced trader, with many years of experience (about 15 years - 10 living exclusively from this)
      I am going to give you some tips that you must know:
      There are going to be many people who tell you that trade is easy, that with only crossiing a line  with another one you will win a lot of money.... and that´s not true.  No, Sir, reality is far away from that. Many people who start arrive here with the hope that someone "gives them" a free method, they watch youtube videos thinking that this will give them the "strategy" and in a few days they realize that it does not work for them - they lose money - and then They go looking for a new one ... and so on. YES, IT´S TRUE YOU EARN IN TRADING, A LOT. BUT THINK: for a few to win (10% + any BROKER) many others must lose (90% people). YOU MUST HAVE A MONEY MANAGMENT FORMULA ( you can email me) People study so many years to live on this, not because they are dumb, but to know what they do, when, and have absolute effectiveness. It´s very easy to get lost here: do not disperse, jumping from one to another strategy WILL NEVER give you money, it will only waste your time and make you nervous when trading. PEOPLE WHO CHANGE THEIR METHOD CONSTANTLY : LOOOOSE ALWAYS.   If you have the knowledge to develop it, take your time and do it.  Always try it first on DEMO for at least 2 weeks! If not: search to buy a solid strategy (no you tube videos pleassse ! Avoid losing money! ) This is like any business, it requires some capital to start (capital = money in the broker + solid made /purchased strategy) If you are lost: I RECOMMEND YOU NOT TO WASTE TIME IN YOUTUBE, JOIN PEOPLE WHO HAVE EXPERIENCE AND IF YOU ARE GOING TO BUY A METHOD ... PLEASE !!!! DO NOT BUY 10 BAD AND CHEAP METHODS, SAVE MONEY AND BUY ONLY 1 BUT EXCLUSIVE AND MUST ALLWAYS HAVE SUPPORT !!!!!  Do not buy Signals! They never keep up with constant profits! One week will win and the next will lose. Nothing that does not depend absolutely on you will give you the money you are looking for. And if you do not have a strategy (made or purchased) do not even try PLEASE PLEASE PLEASE: DO NOT USE REAL MONEY! AT LEAST 2 WEEK DEMO FREE HELP HERE!!!!!  IF YOU FOLLOW MY ADVICE YOU WILL BE PART OF THAT 10% WINNER, email me.
      Have a nice trading day
       
       
  • Topics

  • Posts

    • A custom Better Daily Range indicator for MT5 is now available on the Metaquotes website and directly in the MT5 platform. https://www.mql5.com/en/market/product/103800 The Better Daily Range indicator shows the previous trading day's price range on the current day's chart. Many traders mark out the previous day's high, low, and the current day's open before trading. This is not an average true range indicator (ATR). This is not an average daily range indicator (ADR). This is a daily range indicator (DR). This indicator shows horizontal maximum and minimum range lines. If your broker-dealer's MT5 platform shows Sunday bars, Sunday bars are not included as previous days. In other words, Monday uses Friday's price data (skips Sunday). This indicator also shows two 25% (of range) breakout lines: one that is 25% higher than the maximum range line, and one that is 25% lower than minimum range line. A middle range line is also shown. Immediately after the daily close of your broker-dealer, all five range lines update to the new daily values.   Many traders only trade during times of high volume/liquidity. The Better Daily Range indicator also shows five adjustable time separator lines: A local market open time line (a vertical line), A local market middle time A line (a vertical line), A local market middle time B (a vertical line), A local market middle time C (a vertical line), A local market close time (a vertical line), and A local market open price (a horizontal line). The location of the local market open price depends on your input local market open time. In other words, you input your desired market open time according to your local machine/device time and the indicator automatically shows all five session lines. When your incoming price bars reach your input local market open time line, the indicator automatically shows the price to appear at your input local market open time. If your broker-dealer's MT5 platform shows Sunday bars, the time separator lines do not show on a Sunday. Immediately after midnight local machine/device time, the five session time lines (vertical lines) are projected forward into the current day (into the future hours) and the local open price line is erased. The local open price line reappears when the price bars on the chart reach your input local open time (your local machine/device time).   The indicator has the following inputs (settings):   Chart symbol of source chart [defaults to: EURUSD] - Allows you to show data from another chart symbol other than the current chart symbol. Handy for showing standard timeframe data on an MT5 Custom Chart. Local trading session start hour [defaults to: 09] - Set your desired start hour for trading according to the time displayed on your local machine/device operating system (all times below are your local machine/device operating system times). The default setting, 09, means 9:00am. Local trading session start minute [defaults to: 30] - Set your desired start minute. The default setting, 30, means 30 minutes. Both the default hour and the default minute together mean 9:30am. Local trading session hour A [defaults to: 11] - Set your desired middle hour A for stopping trading when volume tends to decrease during the first half of lunch time. The default setting, 11, means 11:00am. Local trading session minute A [defaults to: 00] - Set your desired middle minute A. Both the default hour and the default minute together mean 11:00am. Local trading session hour B [defaults to: 12] - Set your desired middle hour B for the second half of lunch time. The default setting, 12, means 12:00pm (noon). Local trading session minute B [defaults to: 30] - Set your desired middle minute B. Both the default hour and the default minute together mean 12:30pm. Local trading session hour C [defaults to: 14] - Set your desired middle hour C for resuming trading when volume tends to increase. The default, 14, means 2:00pm. Local trading session minute C [defaults to: 00] - Set your desired middle minute C. Both the default hour and the default minute together mean 2:00pm. Local trading session end hour [defaults to: 16] - Set your desired end hour for stopping trading. The default setting, 16, means 4:00pm. Local trading session end minute [defaults to: 00] - Set your desired end minute for stopping trading. Both the default hour and the default minute together mean 4:00pm. High plus 25% line color [defaults to: Red]. High plus 25% line style [defaults to: Soid]. High plus 25% line width [defaults to 4]. High line color [defaults to: IndianRed]. High line style [defaults to: Solid]. High line width [defaults to: 4]. Middle line color [defaults to: Magenta]. Middle line style [defaults to: Dashed]. Middle line width [defaults to: 1]. Low line color [defaults to: MediumSeaGreen]. Low line style [defaults to: Solid]. Low lien width [defaults to: 4]. Low minus 25% line color [defaults to: Lime]. Low minus 25% line style [defaults to: Solid]. Low minus 25% line width [defaults to: 4]. Local market open line color [defaults to: DodgerBlue]. Local market open line style [defaults to: Dashed]. Local market open line width [defaults to: 1]. Local market middle lines color [defaults to: DarkOrchid]. Local market middles lines style [defaults to: Dashed]. Local market middles lines width [defaults to: 1]. Local market close line color [default: Red]. Local market close line style [Dashed]. Local market close line width [1]. Local market open price color [White]. Local market open price style [Dot dashed with double dots]. Local market open price width [1].
    • A custom Logarithmic Moving Average indicator for MT5 is now available for MT5 on the Metaquotes website and directly in the MT5 platform. https://www.mql5.com/en/market/product/99439 The Logarithmic Moving Average indicator is a moving average that inverts the formula of an exponential moving average. Many traders are known to use logarithmic charts to analyze the lengths of price swings. The indicator in this post can be used to analyze the logarithmic value of price on a standard time scaled chart. The trader can set the following input parameters: MAPeriod [defaults to: 9] - Set to a higher number for more smoothing of price, or a lower number for faster reversal of the logarithmic moving average line study. MAShift [defaults to: 3] - Set to a higher number to reduce the amount of price crossovers, or a lower for more frequent price crossovers. Indicator line (indicator buffer) can be called with iCustom in Expert Advisors created by Expert Advisor builder software or custom coded Expert Advisors: No empty values; and No repainting.
    • A custom Semi-Log Scale Oscillator indicator is now available for MT5 on Metaquotes website and directly in the MT5 platform. https://www.mql5.com/en/market/product/114705 This indicator is an anchored semi-logarithmic scale oscillator. A logarithmic scale is widely used by professional data scientists to more accurately map information collected throughout a timeframe, in the same way that MT5 maps out price data. In fact, the underlying logic of this indicator was freely obtained from an overseas biotech scientist. A log-log chart displays logarithmic values on both the x (horizontal) and y (vertical) axes, which generally produces a straight line that points up, down, or remains flat. A straight line is not very useful for trading markets because such a straight line is so smoothed that actual price values that appear over time are very far away from the line study. In contrast, a semi-log chart is only logged on one axis--generally, the y axis. Such a semi-log chart is well suited for trading markets because the time (x) axis is preserved in its original form while at the same time, providing a graduated y scale where the distance between price increments progressively increases as price rises higher (and decreases as price falls lower). This allows us to establish a zero level for a low price, clearly view trends on straighter angles, and clearly observe amplified price spikes at high prices. Accordingly, this indicator employs a semi-log scale on the y axis only. This indicator is anchored because it allows you to specify a start time for calculation of price bars. The settings are as follows: Year.Month.Day Hour:Minute - defaults to 1970.01.01 00:01 - if left on default setting, the indicator automatically detects the earliest price bar in chart history--even where the year 1970 is not in history. Notes appear in the indicator settings window. Size of first pip step to log - defaults to 135 - this default is suitable for higher timeframes such a MN1 (monthly), while 5 is suitable for lower timeframes such as M1 (minute). Ultimately, optimal settings will depend on the timeframe that you attach the indicator to, the level of price volatility within that timeframe, and start time that you choose. Remember... The semi-log formula calculates from low to high, so your start time must always be a major swing low. Again, notes appear in the indicator settings window. The standard (built-in) MT5 indicators that can be applied to the "Previous indicator's data" can be applied to this indicator. Indicator lines (indicator buffers) can be called with iCustom in Expert Advisors created by Expert Advisor builder software or custom coded Expert Advisors. The log scale Open, High, Low, and Close prices are buffers: No empty values; and No repainting.
    • A custom Gann Candles indicator is now available for MT5 on the Metaquotes website and directly in the MT5 platform. https://www.mql5.com/en/market/product/126398 This Gann Candles indicator incorporates a series of W.D. Gann's strategies into a single trading indicator. Gann was a legendary trader who lived from 1878 to 1955. He started out as a cotton farmer and started trading at age 24 in 1902. His strategies included geometry, astronomy, astrology, times cycles, and ancient math. Although Gann wrote several books, none of them contain all of his strategies so it takes years of studying to learn them. He was also a devout scholar of the Bible and the ancient Greek and Egyptian cultures, and he was a 33rd degree Freemason of the Scottish Rite. In an effort to simplify what I believe are the best of Gann's strategies, I reduced them into one indicator that simply colors your preexisting price bars when those strategies are in-sync versus out-of-sync. This greatly reduces potential chart clutter. Also, I reduced the number of input settings down to only two: FastFilter, and SlowFilter Both FastFilter and SlowFilter must be set to 5 or more, as noted in the Inputs tab upon attaching the indicator to your chart. Gann Candles works on regular time-based charts (M5, M15, M20, etc.) and custom charts (Renko, range bars, etc.). The indicator does not repaint. When using the default settings, blue candles form bullish price patterns, gray candles form flat (sideways) price patterns, and white candles form bearish price patterns. The simplest way to trade Gann Candles is to buy at the close of a blue candle and exit at the close of a gray candle, and then sell at the close of a white candle and exit at the close of a gray candle.
    • A custom Anchored VWAP with Standard Deviation Bands indicator for MT5 is now available on the Metaquotes website and directly through the MT5 platform. https://www.mql5.com/en/market/product/99389 The volume weighted average price indicator is a line study indicator that shows in the main chart window of MT5. The indicator monitors the typical price and then trading volume used to automatically push the indicator line toward heavily traded prices. These prices are where the most contracts (or lots) have been traded. Then those weighted prices are averaged over a look back period, and the indicator shows the line study at those pushed prices. The indicator in this post allows the trader to set the daily start time of that look back period. This indicator automatically shows 5 daily look back periods: the currently forming period, and the 4 previous days based on that same start time. For this reason, this indicator is intended for intraday trading only. The indicator automatically shows vertical daily start time separator lines for those days as well. Both typical prices and volumes are accumulated throughout the day, and processed throughout the day. Important update: v102 of this indicator allows you to anchor the start of the VWAP and bands to the most recent major high or low, even when that high or low appears in your chart several days ago. This is how institutional traders and liquidity providers often trade markets with the VWAP. This indicator also shows 6 standard deviation bands, similarly to the way that a Bollinger Bands indicator shows such bands. The trader is able to set 3 individual standard deviation multiplier values above the volume weighted average price line study, and 3 individual standard deviation multiplier values below the volume weighted average price line study. Higher multiplier values will generate rapidly expanding standard deviation bands because again, the indicator is cumulative. The following indicator parameters can be changed by the trader in the indicator Inputs tab: Volume Type [defaults to: Real volume] - Set to Tick volume for over-the-counter markets such as most forex markets. Real volume is an additional setting for centralized markets such as the United States Chicago Mercantile Exchange. VWAP Start Hour [defaults to: 07] - Set according to broker's or broker-dealer's MT5 server time in 24 hour format. For example, in the New York, United States time zone, 07 is approximately the London, United Kingdom business open hour. VWAP Start Minute [defaults to: 00] - Set according to broker's or broker-dealer's MT5 server time in 24 hour format. For example, 00 is on the hour with no delay of minutes within that hour. StdDev Multiplier 1 [defaults to: 1.618] - Set desired standard deviation distance between the volume weighted average price line study and its nearest upper and lower bands. For example, 1.618 is a basic Fibonacci ratio. Some traders prefer 1.000 or 1.250 here. StdDev Multiplier 2 [defaults to: 3.236] - Set desired standard deviation distance between the volume weighted average price line study and its middle upper and lower bands. For example, 3.236 is 1.618 (above) + 1.618. Some traders prefer 2.000 or 1.500 here. StdDev Multiplier 3 [defaults to: 4.854] - Set desired standard deviation distance between the volume weighted average price line study and its furthest upper and lower bands. For example, 4.854 is 1.618 (above) + 3.236 (above). Some traders prefer 3.000 or 2.000 here. VWAP Color [defaults to: Aqua] - Set desired VWAP line study color. This color automatically sets the color of the start time separators as well. SD1 Color [defaults to: White] - Set desired color of nearest upper and lower standard deviation lines. SD2 Color [defaults to: White] - Set desired color of middle upper and lower standard deviation lines. SD3 Color [defaults to: White] - Set desired color of furthest upper and lower standard deviation lines. Just to clarify, popular standard deviation bands settings are: 1.618, 3.236, and 4.854; or 1.000, 2.000, and 3.000; or 1.250, 1.500, and 2.000. Examples of usage *: In a ranging (sideways) market, enter a trade at the extremes of the standard deviation bands (SD3) and exit when price returns to the VWAP line study. Trade between SD1Pos and SD1 Neg, alternately buying and selling from one standard deviation line to the other. In a trending (rising or falling) market, enter a buy when a price bar opens above the VWAP line study, and exit at the nearest standard deviation band above (SD1Pos). Optionally, repeat the same trade but substitute SD1Pos for the VWAP, and SD2Pos for SD1. Reverse for sell; or Trade all lines (VWAP, SD1Pos, SD2Pos, and SD3Pos) in the same way. Again, reverse for sell. Indicator lines (indicator buffers) can be called with iCustom in Expert Advisors created by Expert Advisor builder software or custom coded Expert Advisors: No empty values; and No repainting.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.