Jump to content

Welcome to the new Traders Laboratory! Please bear with us as we finish the migration over the next few days. If you find any issues, want to leave feedback, get in touch with us, or offer suggestions please post to the Support forum here.

  • Welcome Guests

    Welcome. You are currently viewing the forum as a guest which does not give you access to all the great features at Traders Laboratory such as interacting with members, access to all forums, downloading attachments, and eligibility to win free giveaways. Registration is fast, simple and absolutely free. Create a FREE Traders Laboratory account here.

Futurestrader

PBF Squeeze Replica For Tradestation

Recommended Posts

As previously asked, "Does anyone have the 3 setups that go along with the indicator when purchased from PBF?" Many Thx in advance.

 

i think someone on another forum said they are trading when the histogram and centerline match up, trading histogram divergences, and something about when the histogram breaks its own trendline. I can't remember exactly.

Share this post


Link to post
Share on other sites

Yes, but (to my understanding) the PBF Squeeze histograms change colours to indicate either a pullback or the end of a swing and possible change of trend. I have not come across macd histograms on any standard charting package that change colours.

 

Also, PBF Squueze uses middle line which also changes colour as the trend changes and is claimed to be based on different algorith rather than BB and Keltner Channel, so it would appear that it is not a comparison of apples to apples.

Share this post


Link to post
Share on other sites

Hi

i come back with my compilation problem, there is someone who managed to import and compile any indicators with the last version of MC, and Tams what is your's ?

Because i've verified the gauss function and it's the same and like i've said i can import any indicators (PBF-Squeeze, TTM value Chart, Value Chart v3, ...)

Thanks

Share this post


Link to post
Share on other sites

I am just starting to get familiar with Traders Lab and if I am understanding the posts I can not believe someone would ignore BluRay. The amount of work he has done for this

group is amazing and should be appreciated. He is all over this forum. My hat is off to the BluRay !!!!!!!!!

 

Best Regards to Blu-Ray,

BikinTexas

Share this post


Link to post
Share on other sites
Hi

i come back with my compilation problem, there is someone who managed to import and compile any indicators with the last version of MC, and Tams what is your's ?

Because i've verified the gauss function and it's the same and like i've said i can import any indicators (PBF-Squeeze, TTM value Chart, Value Chart v3, ...)

Thanks

 

Grignouf - I've just recently became interested in observing the PBF_Squeeze, and imported/compiled it this a.m. I'm using MC ver. 5.0, beta 4, and the install worked fine. But I'm no techie, so sorry I can't offer any other assistance. For me, it either works or it doesn't - no troubleshooting skills here. If things don't function, I just delete and say "oh well".

Share this post


Link to post
Share on other sites
Ok, so how do u use this indicator?

 

put it in a level below Price, on top of a level of MACD/Slow Stoch......watch for the trend turns on a 89/144tk charts, as it changes color & crosses the zl....I use a setting of "11", instead of the std "20....find it is quicker in the turns....generally use all "Fib #'s" for all my ta's, but 13 vs 12 vs 11, vs 8 ( in side by side charts)...."11" was the fastest on my TS charts, but, play with the settings & see what your eye sees.... :)

Share this post


Link to post
Share on other sites
Hi newbie here - TS 8.5 installed latest script but nothing shows ? Appears some colors along the bottom of a chart..

Any help greatly appreciated,

bc..

 

 

Two things you can do:

1. read the thread in its entirety, many of the installation problems are already resolved

2. post a screen shot.

Share this post


Link to post
Share on other sites

Okay~

Did as you suggested and still having problems. I took some screen shots..

 

I have no idea what may be stopping it from displaying correctly ? I tried different setting but none seem to make a difference ? Some early post showed semi-log ? I can not get to change that setting in V2.0 ? I'm using TS 8.5

 

Any help Greatly Appreciated

 

bc..

Share this post


Link to post
Share on other sites

Think I have it now.. changed Axis to ( no Axis ) and plot subgraph 2 and it displaying ;-)

 

Thanks to all..

 

I tried posting pic's last time but must have done something wrong ? Will try again

 

 

bc..

5aa70f103aa7a_pic1.thumb.gif.89e7d3fb18e81a8a92092a55949fd3f9.gif

5aa70f1041bf0_pic2.gif.b9477c114937676445e1decb338b4956.gif

Share this post


Link to post
Share on other sites

right click chart......'format indicator (this one); scaling tab....'sclae On'= right or no axis.....subgraph (one ya want it in).....'scale type'=linera; Scale range=Automatic (can preset "subgraph Margins lower=5.000, Upper=5.ooo (have they greyed out if "automatic" chaecked above it.

 

see if this works...... :)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Topics

  • Posts

    • DELL Dell Technologies stock, good day moving higher off the 90.99 double support area, from Stocks to Watch at https://stockconsultant.com/?DELL
    • MCK Mckesson stock, nice trend and continuation breakout at https://stockconsultant.com/?MCK
    • lmfx just officially launched their own LMGX token, Im planning to grab a couple of hundred and maybe have the option to stake them. 
    • Date: 2nd April 2025.   Market on Edge: Tariff Announcement and Volatility Ahead!   The US economic and employment data continues to deteriorate with the job vacancies figures dropping to a 5-month low. In addition to this, the IMS Manufacturing PMI also fell below expectations. However, both the US Dollar and Gold declined simultaneously following the release of the two figures, an uncommon occurrence in the market. Traders expect a key factor to be today’s ‘liberation day’ where the US will impose tariffs on imports. USDJPY - Traders Await Tariff Confirmation! Traders looking to determine how the USDJPY will look today will find it difficult to determine until the US confirms its tariff plan. Today is the day when Trump previously stated he would finalize and announce his tariff plan. The administration has not yet released the policy, but investors expect it to be the most expansionary in a century. President Trump is due to speak at 20:00 GMT. On HFM's Calendar the speech is stated as "US Liberation Day Tariff Announcement". Currently, analysts are expecting Trump’s Tariff Plan to impose tariffs on the EU, chips and pharmaceuticals later today as well as reciprocal tariffs. Economists have a good idea of how these tariffs may take effect, but reciprocal tariffs are still unspecified. In addition to this, 25% tariffs on the car industry will start tomorrow. The tariffs on the foreign cars industry are a factor which will particularly impact Japan. Although, traders should note that this is what is expected and is not yet finalised. Last week, President Trump stated that he would implement retaliatory tariffs but allow exemptions for certain US trade partners. Treasury Secretary Mr Bessent and National Economic Council Director Mr Hassett suggested that the restrictions would primarily target 15 countries responsible for the bulk of the US trade deficit. However, yesterday, Trump contradicted these statements, asserting that additional duties would be imposed on any country that has implemented similar measures against US products. The day’s volatility will depend on which route the US administration takes. The harshness of the policy will influence both the Japanese Yen as well as the US Dollar.   USDJPY 5-Minute Chart   US Economic and Employment Data The JOLT Job Vacancies figure fell below expectations and is lower than the previous month’s figure. The JOLT Job Vacancies read 7.57 million whereas the average of the past 6 months is 7.78 million. The ISM Manufacturing Index also fell below the key level of 50.00 and was 5 points lower than what analysts were expecting. The data is negative for the US Dollar, particularly as the latest release applies more pressure on the Federal Reserve to cut interest rates. However, this is unlikely to happen if the trade policy ignites higher and stickier inflation. In the Bank of Japan’s Governor's latest speech, Mr Ueda said that the tariffs are likely to trigger higher inflation. USDJPY Technical Analysis Currently, the Japanese Yen Index is the worst performing of the day while the US Dollar Index is more or less unchanged. However, this is something traders will continue to monitor as the EU session starts. In the 2-hour timeframe, the USDJPY is trading at the neutral level below the 75-bar EMA and 100-bar SMA. The RSI and MACD is also at the neutral level meaning traders should be open to price movements in either direction. On the smaller timeframes, such as the 5-minute timeframe, there is a slight bias towards a bullish outcome. However, this is only likely if the latest bearish swing does not drop below the 200-Bar SMA.     The key resistant level can be seen at 150.262 and the support level at 149.115. Breakout levels are at 149.988 and 149.674. Key Takeaway Points: Job vacancies hit a five-month low, and the ISM Manufacturing PMI missed expectations, adding pressure on the Federal Reserve regarding interest rate decisions. Traders await confirmation on Trump’s tariff policy, which is expected to impact the EU, chips, pharmaceuticals, and foreign car industries. The severity of the tariffs will influence both the JPY and the USD, with traders waiting for final policy details. The Japanese Yen Index is the worst index of the day while the US Dollar Index is unchanged. Always trade with strict risk management. Your capital is the single most important aspect of your trading business.   Please note that times displayed based on local time zone and are from time of writing this report.   Click HERE to access the full HFM Economic calendar.   Want to learn to trade and analyse the markets? Join our webinars and get analysis and trading ideas combined with better understanding of how markets work. Click HERE to register for FREE!   Click HERE to READ more Market news.   Michalis Efthymiou HFMarkets   Disclaimer: This material is provided as a general marketing communication for information purposes only and does not constitute an independent investment research. Nothing in this communication contains, or should be considered as containing, an investment advice or an investment recommendation or a solicitation for the purpose of buying or selling of any financial instrument. All information provided is gathered from reputable sources and any information containing an indication of past performance is not a guarantee or reliable indicator of future performance. Users acknowledge that any investment in Leveraged Products is characterized by a certain degree of uncertainty and that any investment of this nature involves a high level of risk for which the users are solely responsible and liable. We assume no liability for any loss arising from any investment made based on the information provided in this communication. This communication must not be reproduced or further distributed without our prior written permission.
    • HLF Herbalife stock, watch for a bull flag breakout above 9.02 at https://stockconsultant.com/?HLF
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.