Soultrader's Pivots for Tradestation

[whisper01Barry 10]

Thank you for the indicator. However it will not give mr the lines.

The values in the imput box consist of all "0".

Any ideas.

Thank You for your help.

Barry:)

[trader273 10]

Thank you for the indicator. However it will not give mr the lines.

The values in the imput box consist of all "0".

Any ideas.

Thank You for your help.

Barry:)

 

 

Soultrader's indicator does not automatically get the High Low and Close for you. You have to type in those values where u see the zeroes.

[whisper01Barry 10]

Thanks for the quick reply:cool:. I would think there is way to make this atomatic, maybe yes maybe no. Would you be able to do this?

Thanks again

Barry

[rickp 10]

Hey,

 

I appreciate the free indicators and all the hard work you programmers are willing to share. But, when I downloaded the eld and imported into my Trade Station platform, I get nothing. When importing the eld I answered yes to importing the funtion and the paint bar. I got a warning message saying the "LastbarOnChart" function already exisited and I chose not to replace it.

 

After that it looked like the indiactor was in place and I added it to a 5 minute chart and I get nothing. When I go into format the indicator, it says there are no plots (in the style tab).

 

I know I must have screwed something up in the install.

 

Could you give me some advice?

 

thanks,

 

Rick

[thrunner 10]

After that it looked like the indiactor was in place and I added it to a 5 minute chart and I get nothing. When I go into format the indicator, it says there are no plots (in the style tab).

Not sure why this indicator is still being used. I don't believe Soultrader is using Tradestation any more and Ant is not around anymore. This indicator merely calculates the simple pivot formula based on MANUAL inputs of prior Daily HLC (High low close) and Weekly HLC. If you wish to use this indicator, please go to something like: http://www.mypivots.com/dn/

and pick the instrument of your choice and find the HLCs and fill them in manually. There are pivot indicators on the TS forum that will calculate the prior HLCs and current pivots automatically.

 

[Guest forsearch]

There are pivot indicators on the TS forum that will calculate the prior HLCs and current pivots automatically.

 

 

 

I'm not a TS forum subscriber but wonder if you could choose a few of those open source codes and post them over here in TL land?

 

thxs

[thrunner 10]

Don't really mean to imply that the Soultrader/Ant pivot indicator is worthless. It may be more accurate to manually input the HLC because the Close value or settlement price is sometimes different from the Close you get for your instrument on a chart based on your datafeed. The most accurate settlement price will be the one you get from the exchange, such as CME.

 

It is also arguable whether projected pivots mean anything in modern trading. They are imaginary lines that traders can choose to follow or not. It is probably more helpful to study support and resistance at natural pivots (recent highs and lows) as other threads have done, such as the ones by DBphoenix.

 

There are many floor trader's pivot code that will extract prior HLC, the ones on TS forum are not any better than those available with a search. For example, this one is fine, courtesy of Tradersguild

{
Floor Trader & Fibonacci Pivot Points
Developed by David Laffineuse (trader2be@gmail.com)
Version 1.0: Feb. 7, 2008
http://tradersguild.wordpress.com
}

INPUTS:
PivotType(1),  {PivotsType:1, Standard; PivotType: 2, Fibonacci}
ShowMidPoints(false),
PivotLineColor(red),
SRLineColor(yellow),
TextColor(red),
PivotLineStyle(TOOL_DASHED),
SRLineStyle(TOOL_DOTTED);

VARIABLES:
	PP(0), 
	R1(0),  R2(0), R3(0), R1R2(0), R2R3(0),
	S1(0),  S2(0), S3(0), S1S2(0), S2S3(0),
	PPR1(0), PPS1(0), R1S1(0),
	PTIME(0), SETIME(0), MAXPTS(14),COUNT(0);	{14 levels of Pivots}

ARRAYS: PivotLevel[14](0),
	LineID[14](0),
	TEXTID[14](0),
	TextSTR[14]("");

SETIME = SessionEndTime(1,3);

IF ((Date <> Date[1]) AND (BarType < 2)) THEN

BEGIN

PP = (HighD(1) + LowD(1) + CloseD(1)) / 3;

IF (PivotType = 1) THEN

	BEGIN

		{Main Pivots}

		R1 = 2*PP - LowD(1);
		S1 = 2*PP - HighD(1);
		R2 = PP - S1 + R1;
		S2 = PP - R1 + S1;
		S3 = PP - R2 + S2;
		R3 = PP - S2 + R2;

		{Mid Points}

		PPR1 = (PP+R1)/2;
		R1R2 = (R1+R2)/2;
		R2R3 = (R2+R3)/2;

		PPS1 = (PP+S1)/2;
		S1S2 = (S1+S2)/2;
		S2S3 = (S2+S3)/2;	
		R1S1 = (R1+S1)/2;
	END

 ELSE

		BEGIN

		{Fibonacci-based Pivots}

		R1 = PP + (HighD(1)-LowD(1)) * .382;
		S1 = PP - (HighD(1)-LowD(1)) * .382;
		R2 = PP + (HighD(1)-LowD(1)) * .618;
		S2 = PP - (HighD(1)-LowD(1)) * .618;
		S3 = PP - (HighD(1)-LowD(1)) * .764;
		R3 = PP + (HighD(1)-LowD(1)) * .764;		

	END;


{Pivot Level Initialization}

PivotLevel[1] = R3; 
PivotLevel[2] = R2;  
PivotLevel[3] = R1;  
PivotLevel[4] = PP;
PivotLevel[5]  = S1;
PivotLevel[6] = S2;
PivotLevel[7] = S3;

PivotLevel[8] = R2R3;  
PivotLevel[9] = R1R2;  
PivotLevel[10] = PPR1;
PivotLevel[11] = R1S1;
PivotLevel[12]  = PPS1;
PivotLevel[13] = S1S2;
PivotLevel[14] = S2S3;


{String Initialization}


TEXTSTR[1] = "R3";
TEXTSTR[2] = "R2";
TEXTSTR[3] = "R1";
TEXTSTR[4] = "PP";
TEXTSTR[5] = "S1";
TEXTSTR[6] = "S2";
TEXTSTR[7] = "S3";

TEXTSTR[8] = "R2R3";
TEXTSTR[9] = "R1R2";
TEXTSTR[10] = "PPR1";
TEXTSTR[11] = "R1S1";
TEXTSTR[12] = "PPS1";
TEXTSTR[13] = "S1S2";
TEXTSTR[14] = "S2S3";

if (ShowMidPoints = FALSE) OR (PivotType = 3) then maxpts = 7;

For Count = 1 to maxpts
	Begin
		LineID[Count] = TL_New(Date, 830, PivotLevel[count], Date, SETIME, PivotLevel[count]);
		if (count = 4) then {ACTUAL PIVOT}
			begin
				TL_SetColor(LineID[Count], PivotLineColor);				
				TL_SetStyle(LineID[Count], PivotLineStyle);						
			end

		else
			begin
				TL_SetColor(LineID[Count], SRLineColor );
				TL_SetStyle(LineID[Count], SRLineStyle);
			end;


		IF DATE = CURRENTDATE THEN 
			TL_SetExtRight(LineID[Count], true );


		TextID[Count] = Text_New(Date, SETIME, PivotLevel[Count],TEXTSTR[count]+ ":"+ NumToStr(PivotLevel[Count],2));
		Text_SetStyle(TextID[Count], 1, 1 );
		Text_SetColor(TextID[Count], TextColor );
	End;
End;

[rickp 10]

Thanks! I was hoping there was a way to capture them through easy language, bit it works fine now!

[rickp 10]

Very helpful. I know they are not always points of resistance, but like anything they are helpful on some days. Appreciate the link to DBphoenix.

 

I am just in my first real year of trading and trying to hang in there long enough to learn the ropes and do this for a living. I really appreciate how helpful you all are!

[sevensa 10]

I know they are not always points of resistance, but like anything they are helpful on some days.

 

How would you know what days they are going to be helpful?

[rickp 10]

Good point

[dztrader1 10]

Thank you Soultrader for this indicator, and for all the other TTM replicas,

 

I have downloaded it but I can't seem to understand what I need to do to get it set up. When you say we have to enter close high low for daily/monthly/weekly, are those the values for the previous days low/high/close?

 

Please help, thanks a lot! if you can give me an example even better, i appreciate it.

 

Eric

[Guest forsearch]

When you say we have to enter close high low for daily/monthly/weekly, are those the values for the previous days low/high/close?

 

 

.........Yes.

[Trader08 10]

Can anyone tell me how to change the color of the labels? Oh, and also the position of the labels?

Thx

Edited November 26, 2008 by Trader08
addition

[stackshady 10]

Just go into format, and type the color you want in the input tab for the assigned pivot. From my experience you can't change the position tho, it will let you initially, but when you switch timeframes it will change back. If you dont want to see the line just make the color the color of your window background.

 

Is there a way to add an alert to this indicator, so that when a pivot is touched intraday, the alert triggers? Im tired of staring at my monitors all day!

 

Thanks.

[FunkyTrader 10]

THank you very much for the indicator, used to use a ADE version of the pivots but wometimes the Close of trasestation does not match the settlement price avaible at cbot ( http://www.cbot.com/cbot/pub/page/0,3181,759,00.html ).

 

By the way is there any way to ahve the exact value of the pivot showing next to the reading?

 

 

Thanks

[misterbear 10]

i installed soultrader pivots on TS 8.3 but nothing prints on chart other than the bars. i tried tick, intraday, and daily bars. kindly, what am i missing here?

[SunTrader 10]

Link for ELD appears to be broken??

[doopy 10]

Soultrader: I am new to Tradestation and imported your pivot formula today. When I insert the indicator nothing happens. Am I supposed to input all the data manually each day. When I look at inputs all that data is = 0. Thanks for the site. I have gotten much help here already

[Tams 20]

you can try this version:

http://www.traderslaboratory.com/forums/f56/basic-24hr-pivot-indicator-5533.html#post60377

 

 

[ant 10]

Inidcator Tip

 

This indicator, as it is currently written, requires that the daily/weekly/monthly numbers be manually entered, otherwise no pivots will appear on the chart. If you don't want to enter the data manually, set the inputs as follows:

 

DailyHigh = HighD(1)

DailyLow = LowD(1)

DailyClose = CloseD(1)

WeeklyHigh = HighW(1)

WeeklyLow = LowW(1)

WeeklyClose = CloseW(1)

MonthlyHigh = HighM(1)

MonthlyLow = LowM(1)

MonthlyClose = CloseM(1)

 

These parameters can also be changed in the "inputs" section of the code. You will still be able to overwrite the numbers if so desired.

 

Note: Keep in mind that the pivots may be different when using an intraday chart versus a daily/weekly/monthly chart because the close/settle may be different.

 

Hope this helps.

[Ghost04 10]

This indicator is very goog, an with the setups of Ant, it's perfect.

But, I try to write a plugg in for plot the level of each point and I don't make it.

Are you find the code for this ?

Sorry for my english.

Thanks

[Johnson S. Mcdermott 10]

Thank you very much. I have been looking for a formula like this. I would like to know if it is possible to tweak the formula so it only draws horizontal lines at Yesterday's High Price, Yesterdays Low Price, Yesterday's Closing Price, and Today's Opening Price. I can draw the intermediate lines myself, but I don't want to waste time drawing Primary Support and Resistance Lines when it seems that it could be done automatically. Thanks again.

[snoop 10]

Thanks for the tip. Is it possible to calculate pivots on a 24hr basis, but from 1630 prev day to 1615 today? I'm early in learning EL so forgive me if its a simple question. Thanks.

 

Inidcator Tip

 

This indicator, as it is currently written, requires that the daily/weekly/monthly numbers be manually entered, otherwise no pivots will appear on the chart. If you don't want to enter the data manually, set the inputs as follows:

 

DailyHigh = HighD(1)

DailyLow = LowD(1)

DailyClose = CloseD(1)

WeeklyHigh = HighW(1)

WeeklyLow = LowW(1)

WeeklyClose = CloseW(1)

MonthlyHigh = HighM(1)

MonthlyLow = LowM(1)

MonthlyClose = CloseM(1)

 

These parameters can also be changed in the "inputs" section of the code. You will still be able to overwrite the numbers if so desired.

 

Note: Keep in mind that the pivots may be different when using an intraday chart versus a daily/weekly/monthly chart because the close/settle may be different.

 

Hope this helps.

[Tams 20]

Thanks for the tip. Is it possible to calculate pivots on a 24hr basis, but from 1630 prev day to 1615 today? I'm early in learning EL so forgive me if its a simple question. Thanks.

 

 

anything is possible... if you can imagine it, you can do it.

 

simple operation takes little time create,

complicated operation (ie out of ordinary) takes a little longer make.

 

miracles are possible...

 

 

Start reading !

Edited November 11, 2009 by Tams