Jump to content

Welcome to the new Traders Laboratory! Please bear with us as we finish the migration over the next few days. If you find any issues, want to leave feedback, get in touch with us, or offer suggestions please post to the Support forum here.

  • Welcome Guests

    Welcome. You are currently viewing the forum as a guest which does not give you access to all the great features at Traders Laboratory such as interacting with members, access to all forums, downloading attachments, and eligibility to win free giveaways. Registration is fast, simple and absolutely free. Create a FREE Traders Laboratory account here.

jonbig04

Jonbig04's Log

Recommended Posts

Keep in mind that the more confirmation you have, the higher your price risk will be.
I don't think you can put an equation here. This statement is valid only if you are looking only at one "time frame", or better to say "wave scale". But if you watch more wave scales simultaneously then you can eventually keep both price risk and information risk low. The price risk needn't to be exactly the same as if you entered right at the extreme, but only slightly higher. While the information risk can decrease substantially.

But then you must define what do you want to see on larger wave scale before your entry (setup), and then you must enter aggressively on the small wave scale. This is in fact what one does if he enters on tests. He waits for confirmation on a larger wave scale to decrease information risk, but then takes an aggressive entry on a small wave scale to decrease price risk.

Share this post


Link to post
Share on other sites

Head, good point. My reply was more geared towards the way he currently trades. Being aware of one's place in the larger trend is extremely important.

Thanks for the input guys.

 

Friday's DB at 933 (predetermined level)

Since it's not a double bottom to the tick, where's your entry? Where do you place the initial stop? What's the trade management plan (are you moving the initial stop)? Where's the exit(s)?

 

It's easy to spot those in retrospect, and concoct a plan that would work for that trade. It's harder to design a plan that you'll stick to every time (that has an edge!).

Share this post


Link to post
Share on other sites
Head, good point. My reply was more geared towards the way he currently trades. Being aware of one's place in the larger trend is extremely important.

 

Since it's not a double bottom to the tick, where's your entry? Where do you place the initial stop? What's the trade management plan (are you moving the initial stop)? Where's the exit(s)?

 

It's easy to spot those in retrospect, and concoct a plan that would work for that trade. It's harder to design a plan that you'll stick to every time (that has an edge!).

 

Good points.

 

Regarding a plan, I'm not going to make one that's too specific. It will depend on that day. I will be employing some of my old entry techniques to get in. This one for example. The 2 bottom legs were just below 933, which actually isn't all that strange because globex low is at 932. I know from playing globex levels (actually any sort of levels that are close) that price usually break to the extreme level, not the closest. I can see 1 of 2 potential plays, one would have worked would wouldn't have.

 

The first is to wait for the hump to really be taken, the hump is opening range high (ORH) and we can expect R there and it could be wise to wait for some follow through above it. Once that is taken we can wait for a retrace back to it (flip), then buy it. This would have been stopped.

 

The other play is to wait for the hump to be taken out even buy a tick (technically confirming the DB), then buy any pullback-which would have been ORL which held to the tick. The stop protection would be the ORL levels, globex levels, or major S/R that I have identified. Once I see the pattern, I still have to wait to get a good entry...if that a makes sense.

 

Or you could try both entries. As you said, hindsight it one thing-real time is quite different.

Share this post


Link to post
Share on other sites

1. Identify major S/R levels on 100k and 30k chart. Ideally I like to see reversals and/or successful flips of these levels before I note them.

 

This is the same thing I have been doing, with only moderate results. It's a simple thing, but levels taken from larger charts are so great to play intraday IMO. Call me a nerd but it's so cool to watch price stop on a dime at or very near a certain level that you've predetermined. Important as they are I have learned that they, alone, are not enough to meet my monthly goal of 20-30ES.

 

2. Identify major trend.

 

This is done in the simplest manner using HH/HL/LH/LL etc. I don't fade the major trend unless there is a reversal confirmation on the anchor chart.

 

3. Once trend is determined wait for the anchor chart to retrace to major level.

 

This is very similar to what I have been doing the past month or so, the only difference here is that I will not be fading the anchor's trend at all.

4. Move to entry chart and wait for confirmed reversal formation at that area.

 

This is the brand new stuff to me. This formation should be against the day's trend but with the anchors trend. Pattern identification will take some time to get used to, but price rarely reverses without giving clues, those are the clues I'm looking for. I need to see these patterns confirm before I can think about entering.

5. Once confirmed, wait for pull-back for entry. The pullback has to be to a level like ORH, ORL, GLOW,GHIGH or if the reversal is a W or M, can enter on the hump flip retest.

 

This part is not new, this is exactly what I was doing in the #AHG room and actually had very consistent monthly success with (though I think a lot of that is to do with volatility). Basically the idea is to wait for an intraday level to be taken and for price to pull back to it. This way you can get in at the end of the pullback with your stop protected. After all, that's the hard part of entering on PBs. Ideally I can enter on any pullback, but I'm not good enough to do that yet.

 

6. Entries will be based on chasing price or volume exhaustion if it happens. I want to see price get within 2 ticks of the level, then I will be ticks behind it and will follow it until filled. Stops will be dependent on the fill and how far I am from S/R, however they will be no more than 2 and no less than 0.75.

7. Targets are going to be nothing less than 9ES (and more like 10-13) and ideally will be dictated by the anchor chart (LLs, HHs).

 

If a reversal formation confirms on the anchor, I can then look to the entry chart for a pull back to enter. The only time I'm allowed to enter without a pullback is if there is a very large and perfect formation on the 30k chart and price "pops" with force at the confirmation, at which point I will simply enter at market. This doesn't happen very often, but I believe when it does it signals a potentially explosive move (hence the high volume pop).

 

 

Anchor=30k vol chart and 100k vol chart

Entry=10k vol chart

+5sec (w/volume)

 

Basically these new rules are combining my old strategy (level flip entries) with my new one (purely s/r) with the added confluence of anchor trend and reversal patterns. Just to give credit where it's due this is all 100% AHG. Anek told me to add patterns a long time ago and I didn't listen. I feel that the patterns and their confirmation will give me the higher accuracy that I need. I am very excited about implementing the new plan as I feel it addresses what you all have been saying about my trading and is more based in sound PA. I really hope/think this is what I need to get to the next level.

Share this post


Link to post
Share on other sites

No trades thursday. Saw DT confirm at a major area on the larger TF chart. I waited to see if there was going to be any action once we broke 917.75 (DT confirmation). Sure enough, there was and I immediately shorted. Its within my rules and I think it was a great trade. Too bad price dropped an addition 6ES before bouncing all the way off of GLOW to make a higher high and stop me out lol. Oh well, shit happens. I will gladly take this kind of trade all day!

 

Anyways only got 3 days of trading the new rules in and ended up +3.75. I'm not backtesting since its simply to pointless and discretionary. However if I had been trading with the rules the whole week, things probably would have been better, but there's no point in speculating. We'll just see what next week is like. I'm feeling pretty confident-price had to jump through hoops to stop me out today. Of course, it routinely does whatever it wants :)

 

I am using opening range high/low and globex high/low. To put it simply, they are indicators. If there is a major level overnight chances are it will become glow or ghigh, same with the opening range levels. They just quanitfy and plot s/r for me, which is why they often have huge impact on price. I mean look at today's high and low.

5aa70eec6d061_Picture7(2).thumb.png.bb509f69f0ad618416d48436280be338.png

Share this post


Link to post
Share on other sites
However if I had been trading with the rules the whole week, things probably would have been better, but there's no point in speculating. We'll just see what next week is like.

 

Well said there. That is the truth with any discretionary method. It really is impossible to say with any grasp on reality how the week coulda, woulda, shoulda played out.

 

With regards to your SR levels, I would recommend keeping the current markets condition in mind. Still in a trading range, so prior day levels and recent range levels are salient. Things will change....Joy of the markets ;)

 

:2c:

 

With kind regards,

MK

Share this post


Link to post
Share on other sites

7. Targets are going to be nothing less than 9ES (and more like 10-13) and ideally will be dictated by the anchor chart (LLs, HHs).

 

seems arbitrary target to me, check out ATR indicator then you can adjust to take 1/3 atr, 1/2 atr, full atr etc...

Share this post


Link to post
Share on other sites

Thanks for the input. I'm not a big fan of indicators, though I see the logic behind the ATR one. I admit my targets aren't as refined as they should be and really I should take back the whole 10-13 things. The targets will be dependent on the anchor (larger time frame) chart.

 

Consider what I'm looking for. I'm looking for trend continuence. Therefor if that happens, it makes sense to simply target a LL or HH of the trend I'm hoping to ride. Typically, since I'm looking at a large TF trend, a LL or HH will equal quite a few points.

Share this post


Link to post
Share on other sites

ATR is the exact opposite of trading support/resistance. They also makes no sense generally if you realize that the bars range is arbitrary since it's based on a parameter (i.e. the periodicy).

Share this post


Link to post
Share on other sites

So I think I have all the details worked out in the new plan. I pretty damn confident this will get me my 20-30 ES per month. Its tough making a plan bc real time always presents you with a scenario that you didn't plan for. I've taken a few trades this week some worked out, some didn't (my short was stopped by 2 ticks before yesterdays reversal).

 

My first plan was basically just an entrance plan. I just jumped in and got a good entry, but I really had no reason for thinking price would continue in my direction once I entered. Add in the discipline to hold for large targets and depending on the volatility, you can be profitable doing JUST this. I was for months and I was meeting my goal. I noticed though that the net was dropping while the VIX did. If I did this now I would probably do decent or break even. With this plan I had the entry but not the direction.

 

My second plan was just s/r. With these rules I was right pretty often about which way price was going to head (remember calling all the HODs and LODs), but I had no way to enter. Sure I would get lucky and catch one here and there (and that was enough to be profitable), but it was luck whether I would get stopped out or not. With this plan I had the direction, but no good entry.

 

What I have done is combined the two and more importantly, added patterns. Patterns are really making the difference and I should have used them long ago. Look at the DB (at globex low) this morning or the DT yesterday. I am being conservative and I'm only playing patterns that are with the larger trend. I also only take the patterns that occur at predetermined s/r.

 

So once price gets to S/R I don't jump in like I used to, I wait. If a pattern confirms then I can be pretty damn sure which way price is headed (price reverses via some kind of DT or DB like 80% of the time). Once I have that information THEN I can use my entry rules.

 

The reason I'm very confident isn't because of my backtesting, its because I really feel I've addressed the weaknesses in my earlier systems.

 

That all said I'm gonna kick this thing off tomorrow. As you can imagine I don't get my set up very often. 2-5 trades per week. So on days I don't enter I won't be updating. After all this damn time and effort, I think I finally figured out what to do. Now I just have to do it.

Share this post


Link to post
Share on other sites

So does this mean you're going live (or anyone soon)?

 

Also, how about you post your charts with s/r levels? Might give us something to follow along with. You entering on stops, or limits?

Share this post


Link to post
Share on other sites

Atto, I'm going back and forth on it. Stop placement is the same regardless of entry. I'm not too worried about entries anymore because ideally my stop is protected by the level (s/r, OR, GL). As you can see even from today's chart, they offer pretty reliable s/r.

 

jbtrades, thank you.

 

took a stop today for -1.25. notes in the chart.

626.png.e908e6fd56104c7893d8c859a7b5db54.png

Share this post


Link to post
Share on other sites

You conceptually know this, but try to internalize it: With a proper edge and plan, the difference between a trade that works or doesn't is only the outcome.

 

If you leave whether to move a stop to b/e after 2pts to your intuition, then you're always on the hook for the result. Make a plan, be consistent about it, and it gets a whole lot easier. Trades become an exploitation of an edge, and the outcome of any one trade is meaningless.

Share this post


Link to post
Share on other sites

Take from this what you will...

 

Since you've switched to trading patterns (with confirmation), you're entering later in the move and on a breakout. I'm assuming you got the 910 level from price action on 6/19-6/20, which also came into play yesterday (6/25).

 

So, correct me if I'm mistaken, your setup is taking breakouts of S/R after a chart pattern, such as a double top. The double top occurred, as price congested between the 918 level and 910. If you entered at the top, you'd have the most information risk (ie, you have little to no confirmation), but your price risk is the smallest. Assuming a good fill, your stop loss is simply the buffer you want past the top in case the squiggles test a tick or couple higher.

 

Notice that yesterday, price found demand right above 910, and later tested a little below that (909.50). So, heading into today, that whole zone is a possible area of support. Sure enough, ES found demand again at 910.50 (09:33 edt) and again at 909.75 (10:15 edt).

 

If you want to enter on the breakout of this larger congestion area, you want price to leave this support zone completely. However, your entry was smack in the middle of support, and (as it appears on your chart) on a small pullback. How it played out was that price peaked slightly out, didn't find the supply to keep it down there, and returned to the congestion (value). You were going short when the stronger hands were buying. Retrospect, I know, but read on.

 

Additionally, since you're trading the breakout, you really don't have S/R to protect you as you did before. Yes, you have a level drawn on the chart, but for your entry to work, that level has to break. If it doesn't, it sure as hell isn't going to protect your short. The purpose of price action based stops is to take you out of the trade once price has passed a "danger point". Unfortunately, breakouts don't have convenient points, so your stop is either fixed (ie, 2 pts) or based on some micro local swing high/low. Notice how price just waddles around the 910.50 area.

 

This is exactly what I meant earlier when I said that these kinds of trades have more price risk. You have less protection, so either are using sub-par stops locations, or wider stops. Don't get me wrong, I'm not knocking pattern trading, breakouts, or wanting confirmation. I used to trade a lot of breakouts as well, and did so successfully. However, think about exactly what you want to see in a breakout. What are the shorts thinking? What are the longs thinking? When will people start to puke (which, incidentally, is when you'll be cashing in)?

 

Just some things to think about. Also, make sure your confidence is coming from a strong plan with a bias, and not the idea of patterns. Looking at a couple month's worth of trades wouldn't hurt. If/when you do, don't just see if it works. Look at what happens when it works, and when it doesn't. You'll pick up things, such as the fight the buyers gave right before your entry on the lows (instead of giving up and stopping out, propelling price downward). But first, you'll need a solid plan.

 

attachment.php?attachmentid=11751&stc=1&d=1246061182

jon_ES.png.9c9d5e8c50b592e4d024eb7a925c98e2.png

Share this post


Link to post
Share on other sites

Makes sense. Please don't interpret my critique as knocking the idea behind it. Sometimes it helps to pay attention to the surrounding area and avoid tunnel vision. Yeah, the traverse down was a down trend, but we're also in a larger congestion area, so your pullback, which normally would have been a good idea, was right into S.

 

As for the stop... As you probably know, I don't follow ORL or ORH (though they might be wonderful, wouldn't know). My argument is that if ORL/ORH was decent S/R, I'd notice it anyways (as a perfect example, I got the 910 from weeks before, with a test today). Next, you placed your stop assuming the trade would work. But stops are for when they don't :). Especially on flips, you want it tested before you could bank on it helping you out. Right when it's being broken (or "fought for"), the whole area is fair game. As for "acceptance", price wasn't rejected (look at the highs and other lows). Sure, they were fighting, but bulls weren't rolling over so quick (which is exactly what you want to see for a breakout).

 

There's no need to over complicate things, so if none of this resonates with you, save it for a rainy day.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Topics

  • Posts

    • A custom Better Daily Range indicator for MT5 is now available on the Metaquotes website and directly in the MT5 platform. https://www.mql5.com/en/market/product/103800 The Better Daily Range indicator shows the previous trading day's price range on the current day's chart. Many traders mark out the previous day's high, low, and the current day's open before trading. This is not an average true range indicator (ATR). This is not an average daily range indicator (ADR). This is a daily range indicator (DR). This indicator shows horizontal maximum and minimum range lines. If your broker-dealer's MT5 platform shows Sunday bars, Sunday bars are not included as previous days. In other words, Monday uses Friday's price data (skips Sunday). This indicator also shows two 25% (of range) breakout lines: one that is 25% higher than the maximum range line, and one that is 25% lower than minimum range line. A middle range line is also shown. Immediately after the daily close of your broker-dealer, all five range lines update to the new daily values.   Many traders only trade during times of high volume/liquidity. The Better Daily Range indicator also shows five adjustable time separator lines: A local market open time line (a vertical line), A local market middle time A line (a vertical line), A local market middle time B (a vertical line), A local market middle time C (a vertical line), A local market close time (a vertical line), and A local market open price (a horizontal line). The location of the local market open price depends on your input local market open time. In other words, you input your desired market open time according to your local machine/device time and the indicator automatically shows all five session lines. When your incoming price bars reach your input local market open time line, the indicator automatically shows the price to appear at your input local market open time. If your broker-dealer's MT5 platform shows Sunday bars, the time separator lines do not show on a Sunday. Immediately after midnight local machine/device time, the five session time lines (vertical lines) are projected forward into the current day (into the future hours) and the local open price line is erased. The local open price line reappears when the price bars on the chart reach your input local open time (your local machine/device time).   The indicator has the following inputs (settings):   Chart symbol of source chart [defaults to: EURUSD] - Allows you to show data from another chart symbol other than the current chart symbol. Handy for showing standard timeframe data on an MT5 Custom Chart. Local trading session start hour [defaults to: 09] - Set your desired start hour for trading according to the time displayed on your local machine/device operating system (all times below are your local machine/device operating system times). The default setting, 09, means 9:00am. Local trading session start minute [defaults to: 30] - Set your desired start minute. The default setting, 30, means 30 minutes. Both the default hour and the default minute together mean 9:30am. Local trading session hour A [defaults to: 11] - Set your desired middle hour A for stopping trading when volume tends to decrease during the first half of lunch time. The default setting, 11, means 11:00am. Local trading session minute A [defaults to: 00] - Set your desired middle minute A. Both the default hour and the default minute together mean 11:00am. Local trading session hour B [defaults to: 12] - Set your desired middle hour B for the second half of lunch time. The default setting, 12, means 12:00pm (noon). Local trading session minute B [defaults to: 30] - Set your desired middle minute B. Both the default hour and the default minute together mean 12:30pm. Local trading session hour C [defaults to: 14] - Set your desired middle hour C for resuming trading when volume tends to increase. The default, 14, means 2:00pm. Local trading session minute C [defaults to: 00] - Set your desired middle minute C. Both the default hour and the default minute together mean 2:00pm. Local trading session end hour [defaults to: 16] - Set your desired end hour for stopping trading. The default setting, 16, means 4:00pm. Local trading session end minute [defaults to: 00] - Set your desired end minute for stopping trading. Both the default hour and the default minute together mean 4:00pm. High plus 25% line color [defaults to: Red]. High plus 25% line style [defaults to: Soid]. High plus 25% line width [defaults to 4]. High line color [defaults to: IndianRed]. High line style [defaults to: Solid]. High line width [defaults to: 4]. Middle line color [defaults to: Magenta]. Middle line style [defaults to: Dashed]. Middle line width [defaults to: 1]. Low line color [defaults to: MediumSeaGreen]. Low line style [defaults to: Solid]. Low lien width [defaults to: 4]. Low minus 25% line color [defaults to: Lime]. Low minus 25% line style [defaults to: Solid]. Low minus 25% line width [defaults to: 4]. Local market open line color [defaults to: DodgerBlue]. Local market open line style [defaults to: Dashed]. Local market open line width [defaults to: 1]. Local market middle lines color [defaults to: DarkOrchid]. Local market middles lines style [defaults to: Dashed]. Local market middles lines width [defaults to: 1]. Local market close line color [default: Red]. Local market close line style [Dashed]. Local market close line width [1]. Local market open price color [White]. Local market open price style [Dot dashed with double dots]. Local market open price width [1].
    • A custom Logarithmic Moving Average indicator for MT5 is now available for MT5 on the Metaquotes website and directly in the MT5 platform. https://www.mql5.com/en/market/product/99439 The Logarithmic Moving Average indicator is a moving average that inverts the formula of an exponential moving average. Many traders are known to use logarithmic charts to analyze the lengths of price swings. The indicator in this post can be used to analyze the logarithmic value of price on a standard time scaled chart. The trader can set the following input parameters: MAPeriod [defaults to: 9] - Set to a higher number for more smoothing of price, or a lower number for faster reversal of the logarithmic moving average line study. MAShift [defaults to: 3] - Set to a higher number to reduce the amount of price crossovers, or a lower for more frequent price crossovers. Indicator line (indicator buffer) can be called with iCustom in Expert Advisors created by Expert Advisor builder software or custom coded Expert Advisors: No empty values; and No repainting.
    • A custom Semi-Log Scale Oscillator indicator is now available for MT5 on Metaquotes website and directly in the MT5 platform. https://www.mql5.com/en/market/product/114705 This indicator is an anchored semi-logarithmic scale oscillator. A logarithmic scale is widely used by professional data scientists to more accurately map information collected throughout a timeframe, in the same way that MT5 maps out price data. In fact, the underlying logic of this indicator was freely obtained from an overseas biotech scientist. A log-log chart displays logarithmic values on both the x (horizontal) and y (vertical) axes, which generally produces a straight line that points up, down, or remains flat. A straight line is not very useful for trading markets because such a straight line is so smoothed that actual price values that appear over time are very far away from the line study. In contrast, a semi-log chart is only logged on one axis--generally, the y axis. Such a semi-log chart is well suited for trading markets because the time (x) axis is preserved in its original form while at the same time, providing a graduated y scale where the distance between price increments progressively increases as price rises higher (and decreases as price falls lower). This allows us to establish a zero level for a low price, clearly view trends on straighter angles, and clearly observe amplified price spikes at high prices. Accordingly, this indicator employs a semi-log scale on the y axis only. This indicator is anchored because it allows you to specify a start time for calculation of price bars. The settings are as follows: Year.Month.Day Hour:Minute - defaults to 1970.01.01 00:01 - if left on default setting, the indicator automatically detects the earliest price bar in chart history--even where the year 1970 is not in history. Notes appear in the indicator settings window. Size of first pip step to log - defaults to 135 - this default is suitable for higher timeframes such a MN1 (monthly), while 5 is suitable for lower timeframes such as M1 (minute). Ultimately, optimal settings will depend on the timeframe that you attach the indicator to, the level of price volatility within that timeframe, and start time that you choose. Remember... The semi-log formula calculates from low to high, so your start time must always be a major swing low. Again, notes appear in the indicator settings window. The standard (built-in) MT5 indicators that can be applied to the "Previous indicator's data" can be applied to this indicator. Indicator lines (indicator buffers) can be called with iCustom in Expert Advisors created by Expert Advisor builder software or custom coded Expert Advisors. The log scale Open, High, Low, and Close prices are buffers: No empty values; and No repainting.
    • A custom Gann Candles indicator is now available for MT5 on the Metaquotes website and directly in the MT5 platform. https://www.mql5.com/en/market/product/126398 This Gann Candles indicator incorporates a series of W.D. Gann's strategies into a single trading indicator. Gann was a legendary trader who lived from 1878 to 1955. He started out as a cotton farmer and started trading at age 24 in 1902. His strategies included geometry, astronomy, astrology, times cycles, and ancient math. Although Gann wrote several books, none of them contain all of his strategies so it takes years of studying to learn them. He was also a devout scholar of the Bible and the ancient Greek and Egyptian cultures, and he was a 33rd degree Freemason of the Scottish Rite. In an effort to simplify what I believe are the best of Gann's strategies, I reduced them into one indicator that simply colors your preexisting price bars when those strategies are in-sync versus out-of-sync. This greatly reduces potential chart clutter. Also, I reduced the number of input settings down to only two: FastFilter, and SlowFilter Both FastFilter and SlowFilter must be set to 5 or more, as noted in the Inputs tab upon attaching the indicator to your chart. Gann Candles works on regular time-based charts (M5, M15, M20, etc.) and custom charts (Renko, range bars, etc.). The indicator does not repaint. When using the default settings, blue candles form bullish price patterns, gray candles form flat (sideways) price patterns, and white candles form bearish price patterns. The simplest way to trade Gann Candles is to buy at the close of a blue candle and exit at the close of a gray candle, and then sell at the close of a white candle and exit at the close of a gray candle.
    • A custom Anchored VWAP with Standard Deviation Bands indicator for MT5 is now available on the Metaquotes website and directly through the MT5 platform. https://www.mql5.com/en/market/product/99389 The volume weighted average price indicator is a line study indicator that shows in the main chart window of MT5. The indicator monitors the typical price and then trading volume used to automatically push the indicator line toward heavily traded prices. These prices are where the most contracts (or lots) have been traded. Then those weighted prices are averaged over a look back period, and the indicator shows the line study at those pushed prices. The indicator in this post allows the trader to set the daily start time of that look back period. This indicator automatically shows 5 daily look back periods: the currently forming period, and the 4 previous days based on that same start time. For this reason, this indicator is intended for intraday trading only. The indicator automatically shows vertical daily start time separator lines for those days as well. Both typical prices and volumes are accumulated throughout the day, and processed throughout the day. Important update: v102 of this indicator allows you to anchor the start of the VWAP and bands to the most recent major high or low, even when that high or low appears in your chart several days ago. This is how institutional traders and liquidity providers often trade markets with the VWAP. This indicator also shows 6 standard deviation bands, similarly to the way that a Bollinger Bands indicator shows such bands. The trader is able to set 3 individual standard deviation multiplier values above the volume weighted average price line study, and 3 individual standard deviation multiplier values below the volume weighted average price line study. Higher multiplier values will generate rapidly expanding standard deviation bands because again, the indicator is cumulative. The following indicator parameters can be changed by the trader in the indicator Inputs tab: Volume Type [defaults to: Real volume] - Set to Tick volume for over-the-counter markets such as most forex markets. Real volume is an additional setting for centralized markets such as the United States Chicago Mercantile Exchange. VWAP Start Hour [defaults to: 07] - Set according to broker's or broker-dealer's MT5 server time in 24 hour format. For example, in the New York, United States time zone, 07 is approximately the London, United Kingdom business open hour. VWAP Start Minute [defaults to: 00] - Set according to broker's or broker-dealer's MT5 server time in 24 hour format. For example, 00 is on the hour with no delay of minutes within that hour. StdDev Multiplier 1 [defaults to: 1.618] - Set desired standard deviation distance between the volume weighted average price line study and its nearest upper and lower bands. For example, 1.618 is a basic Fibonacci ratio. Some traders prefer 1.000 or 1.250 here. StdDev Multiplier 2 [defaults to: 3.236] - Set desired standard deviation distance between the volume weighted average price line study and its middle upper and lower bands. For example, 3.236 is 1.618 (above) + 1.618. Some traders prefer 2.000 or 1.500 here. StdDev Multiplier 3 [defaults to: 4.854] - Set desired standard deviation distance between the volume weighted average price line study and its furthest upper and lower bands. For example, 4.854 is 1.618 (above) + 3.236 (above). Some traders prefer 3.000 or 2.000 here. VWAP Color [defaults to: Aqua] - Set desired VWAP line study color. This color automatically sets the color of the start time separators as well. SD1 Color [defaults to: White] - Set desired color of nearest upper and lower standard deviation lines. SD2 Color [defaults to: White] - Set desired color of middle upper and lower standard deviation lines. SD3 Color [defaults to: White] - Set desired color of furthest upper and lower standard deviation lines. Just to clarify, popular standard deviation bands settings are: 1.618, 3.236, and 4.854; or 1.000, 2.000, and 3.000; or 1.250, 1.500, and 2.000. Examples of usage *: In a ranging (sideways) market, enter a trade at the extremes of the standard deviation bands (SD3) and exit when price returns to the VWAP line study. Trade between SD1Pos and SD1 Neg, alternately buying and selling from one standard deviation line to the other. In a trending (rising or falling) market, enter a buy when a price bar opens above the VWAP line study, and exit at the nearest standard deviation band above (SD1Pos). Optionally, repeat the same trade but substitute SD1Pos for the VWAP, and SD2Pos for SD1. Reverse for sell; or Trade all lines (VWAP, SD1Pos, SD2Pos, and SD3Pos) in the same way. Again, reverse for sell. Indicator lines (indicator buffers) can be called with iCustom in Expert Advisors created by Expert Advisor builder software or custom coded Expert Advisors: No empty values; and No repainting.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.