Various Indicators (Squeeze,2FastMa's,etc)

[Tams 20]

  lonew0lf said:

That was my initial thought but cross above/below what? There's no zero line or crossover like macd or stochastic.

 

write out your thoughts...

step-by-step,

line-by-line,

logic-by-logic,

you will see yourself clearly if you do.

Edited July 1, 2010 by Tams

[lonew0lf 10]

TAMS - i appreciate the guidance, however i'm not seeing the logic in the crossover. I'm sure its something simple that i'm missing; Is there another indicator that you can think of that currently does what i'm looking for where i can use that as guide?

 

Thx

[Tams 20]

  lonew0lf said:

TAMS - i appreciate the guidance, however i'm not seeing the logic in the crossover. I'm sure its something simple that i'm missing; Is there another indicator that you can think of that currently does what i'm looking for where i can use that as guide?

 

Thx

 

 

don't jump ahead,

don't think of the cross over yet,

it might not be the tool you need.

 

but instead, start from the very beginning,

write out your logic

step-by-step...

as if the computer is reading your mind...

 

what is the critical point?

what drives the critical point?

what are the components of this critical point?

what are the attributes of this critical point?

 

you have already mentioned the components that are NOT in this critical point...

>no zero line or crossover like macd or stochastic

if you can identify what's not there, surely you can identify what's there.

 

use a magnifying glass,

enlarge the chart,

zero in on the few bars that triggered this critical event...

the information's got to be there, under your nose somewhere.

[sevensa 10]

  lonew0lf said:

TAMS - i appreciate the guidance, however i'm not seeing the logic in the crossover. I'm sure its something simple that i'm missing; Is there another indicator that you can think of that currently does what i'm looking for where i can use that as guide?

 

Thx

 

How would you explain to someone what it means for it to change color from one bar to the next? Write out the condition of each bar and see if that helps.

[lonew0lf 10]

Tams & Sevensa I think I managed to get what I was looking for after giving it some more thought:

 

Inputs: 
price(Close), 
length(13),
upColour(black), 
downColour(white);

Value1 = jtHMA(price, length);

Plot1(Value1, "FastMA");

{ Color criteria }
if Value1 > Value1[1] then
SetPlotColor(1, upColour)
else if (Value1 < Value1[1]) then 
SetPlotColor(1, downColour);

if Value1 cross above Value1[1] then
alert ("bullish");

if Value1 cross below Value1[1] then 
alert ("bearish");	

[dwf 10]

Is the Radarscreen template/software available here? Or is there a download available? I see where there are indicators here for Radarscreen, but not the actual screen itself (?) I contacted FXCM and spoke to 3 tech guys and they don't even know what it is. Hoping to acquire it if possible. Thanks much.

dwf

[Tams 20]

  dwf said:

Is the Radarscreen template/software available here? Or is there a download available? I see where there are indicators here for Radarscreen, but not the actual screen itself (?) I contacted FXCM and spoke to 3 tech guys and they don't even know what it is. Hoping to acquire it if possible. Thanks much.

dwf

 

Radarscreen is a built-in feature of TradeStation and MultiCharts.

It is not an independent program.

[Techfan1128 10]

Can someone code all of these trade station indicators for ninja trader. It would be much appreciated!!!:helloooo:

[tradermark2009 10]

  Techfan1128 said:

Can someone code all of these trade station indicators for ninja trader. It would be much appreciated!!!:helloooo:

 

Techfan...they are done! The squeeze is done in 3 ways for NT...Look here TradingStudies.com....use the CounterTrend setup, one of 3 in the RSqueeze.zip indicator. Sign up one Big Mikes Trading Forum...they have a template in the downloads NT template section. For the indicators look at the PBF thread and Jeff did the template and he shows the indicators in a jpg of what is needed and all are on BMT download section. Have Fun, and stay out of chop. Mark

[CH888 10]

Blu-Ray,

Someone is selling these on Ebay for $50.

Just an FYI in case it is not you selling them.

 

CH

[Blu-Ray 10]

Thanks CH888

 

No it's not me...... a little bit annoying that someone is profiting from my goodwill. They're free files so I presume I'm helpless to stop him selling them aren't I ?

 

 

Cheers

 

Blu-Ray

[Dirk 10]

  samever said:

Guys, has anyone downloaded the news forex system? Apparently it can trade BOTH trending AND ranging market conditions using the same system. It looks pretty awesome actually.

 

Here's the link to download it

 

You are spamming everywhere......and also very stupid...first post first bs.............

[olobay 10]

  Blu-Ray said:

Here you go, see the attached doc for the code of all the indicators posted in this thread ( except 2ma, which you have )

 

Hope this helps

 

Blu-Ray

 

Hi,

 

In post #47 on page 5, Blu-Ray attached a doc file but when I try to save target as, all I get is a gif file. And when I try to click on it, a new blank webpage opens. Can anyone please post the code for the BR_Paint Bars because I am using OEC and I can't open the eld file?

 

Thanks.

[Tams 20]

  olobay said:

Hi,

 

In post #47 on page 5, Blu-Ray attached a doc file but when I try to save target as, all I get is a gif file. And when I try to click on it, a new blank webpage opens. Can anyone please post the code for the BR_Paint Bars because I am using OEC and I can't open the eld file?

 

Thanks.

 

 

 

	
// BR Paint Bars


Inputs: price(Close), length(13),
	upColour(Blue), downColour(Red);
var:
intrabarpersist v1(0);

v1 = jtHMA(price, length);

plotpb(high,low, "jtHMA");


{ Color criteria }
if (v1 > v1[1]) then 
setplotcolor(1, upColour)
else {if (Value1 < Value1[1]) then }
SetPlotColor(1, downColour);

[olobay 10]

Thanks Tams. The following code is what I have and it compiles error free. However, I am not getting the multiple colours in OEC Trader, only one constant colour. Is the code correct for Paint Bars?

 

// BR Paint Bars

 

 

Inputs: price(Close), length(13),

upColour(Blue), downColour(Red);

var:

intrabarpersist v1(0);

 

v1 = jtHMA(price, length);

 

plotpb(high,low, "jtHMA");

 

 

{ Color criteria }

if (v1 > v1[1]) then

setplotcolor(1, upColour)

else {if (Value1 < Value1[1]) then }

SetPlotColor(1, downColour);

 

 

#function jtHMA

 

Inputs: price(NumericSeries), length(NumericSimple);

Vars: halvedLength(0), sqrRootLength(0);

 

 

{

Original equation is:

---------------------

waverage(2*waverage(close,period/2)-waverage(close,period), SquareRoot(Period)

Implementation below is more efficient with lengthy Weighted Moving Averages.

In addition, the length needs to be converted to an integer value after it is halved and

its square root is obtained in order for this to work with Weighted Moving Averaging

}

if ((ceiling(length / 2) - (length / 2)) <= 0.5) then

halvedLength = ceiling(length / 2)

else

halvedLength = floor(length / 2);

if ((ceiling(SquareRoot(length)) - SquareRoot(length)) <= 0.5) then

sqrRootLength = ceiling(SquareRoot(length))

else

sqrRootLength = floor(SquareRoot(length));

Value1 = 2 * WAverage(price, halvedLength);

Value2 = WAverage(price, length);

Value3 = WAverage((Value1 - Value2), sqrRootLength);

jtHMA = Value3;

[Sierra 10]

Blue-Ray or anyone, is there a way to change the blue dots/line on the 2Fast Ma's to another color that can be more easily seen on a black back ground chart and same with the blue bars on the BR_Paint Bars. Green would be nice on the Paint Bars. I'm technically challenged so any help would be greatly appreciated.....Thanks

 

Sierra

[sunilrohira 10]

Here they are for the Metatrader users: Look at Page 18

 

http://www.traderslaboratory.com/forums/trading-indicators/3688-various-indicators-squeeze-2fastmas-etc-18.html

[calic0 10]

How to get Squeeze working on TS Radar ?

 

Ive seen on another thread someone had this working =- cant work out how thou

[kgrodrigue 10]

Has anyone got this for Radar Screen? thanks

[samkor 10]

I can not access( open and/or download) the file.

Could you please reload and/or relink it?

Or,... would please advice me how to acces it?

samkor

[supergonzo 10]

Did anyone ever figure out the exact .ELD tradestation file for the PBF OSOB indicator? There was some talk about it years ago, that is was the Ergodic ??

[supergonzo 10]

I figured it out, over time

[Tasuki 10]

Hello,

I was very happy to find Blu-Ray's Squeeze indicator, but when I put it on my Tradestation (version 9.5) chart, the all-important color bars in the middle were so tiny you can hardly see them. Attached are two pix to demonstrate. Does anybody have a clue how to fix this, so those bars are large enough to see? I've played with every setting I can find on Tradestation, but no luck so far. Do I just need to find a different version of the Squeeze? Any help gratefully received!

Thanks in advance,

Tasuki

[zdo 20]

  Tasuki said:

Hello,

I was very happy to find Blu-Ray's Squeeze indicator, but when I put it on my Tradestation (version 9.5) chart, the all-important color bars in the middle were so tiny you can hardly see them. Attached are two pix to demonstrate. Does anybody have a clue how to fix this, so those bars are large enough to see? I've played with every setting I can find on Tradestation, but no luck so far. Do I just need to find a different version of the Squeeze? Any help gratefully received!

Thanks in advance,

Tasuki

 

Tasuki,

 

Did you try to format Style, Weight (/width) for that plot?

If that doesn't work, check see if width is being 'overridden' in the code.

 

hth

zdo