Jump to content

Welcome to the new Traders Laboratory! Please bear with us as we finish the migration over the next few days. If you find any issues, want to leave feedback, get in touch with us, or offer suggestions please post to the Support forum here.

  • Welcome Guests

    Welcome. You are currently viewing the forum as a guest which does not give you access to all the great features at Traders Laboratory such as interacting with members, access to all forums, downloading attachments, and eligibility to win free giveaways. Registration is fast, simple and absolutely free. Create a FREE Traders Laboratory account here.

Blu-Ray

VSA - No Demand/No Supply & Squats

Recommended Posts

A special thanks to PivotProfiler for providing the code for VT, unfortunately I volunteered to translate it into Tradestation. Three weeks later and I'm finally finished. Apologies for the delay but Tradestation doesn't allow future referencing which the code did, so I had to individually make it backwards compatible.

 

For example VT code :

 

c>ref(c,+3) had to become c[3]>c in EasyLanguage.................and doing this for over 150 plots :bang head:

 

Most of the plots require at least 1 bar for confirmation, so I've coded the indicator to show, for example, "No Demand3(1)" in the data window to let you know that it required 1 bar for confirmation before the indicator plotted ( handy for looking over previous charts as well ).

 

I've also coded in Alerts into each one, so all you have to do is format the indicator and enable the Alerts if desired.

 

I've split the code into two ELD's, one for No Demand/Supply and the other for squats.

 

I've also included an input so you can adjust the number of ticks above/below the high/low you want the indicator to plot. Here's a pic of some examples:

 

Hope this helps

 

Blu-Ray

 

attachment.php?attachmentid=5194&stc=1&d=1202860506

 

attachment.php?attachmentid=5193&stc=1&d=1202860506

VSA.thumb.png.d92021e1170b0576d8e34f7c22cda158.png

Alerts.png.4e78f2059aa38d5a0273b380c093670f.png

VSA_SQUATS.ELDFetching info...

vsa-no-demand-no-supply.eldFetching info...

Share this post


Link to post
Share on other sites

Please forgive my ignorance Blu-Ray but could you explain what the numbers on No demand/No supply ranging from 1 to 43 indicate, also what does the bracketed (1) mean?

 

Do I take it that the Squat is part of the Bill Williams system ? This also has numbers ranging from 1 to 35?

Share this post


Link to post
Share on other sites
  Greycells said:
Please forgive my ignorance Blu-Ray but could you explain what the numbers on No demand/No supply ranging from 1 to 43 indicate, also what does the bracketed (1) mean?

 

Do I take it that the Squat is part of the Bill Williams system ? This also has numbers ranging from 1 to 35?

 

Greycells

 

The numbers indicating 1 -43 are the different variations of how to come up with a no demand/ no supply.

 

I'm unsure on the squat question as it was PivotProfiler's code, all I have done is to translate it into TS.

 

Hope this helps

 

Blu-Ray

Share this post


Link to post
Share on other sites
  lrabovetskiy said:
Hi Blu-Ray,

 

Thank you very much for providing the indicator. Is it going to work for TS2000i as well?It does not recognize .eld extension.

 

Thank you,

 

Leonid

 

Hi Leonid

 

I don't think it will work, as I'm pretty sure TS2000i only allows 4 plots per indicator and these have over 150 plots, also you can only import ELA files. not ELD's.

 

You could alternatively split it into loads of indicators if you wanted, let me know and I'll attach a text file of the code.

 

Hope this helps

 

Blu-Ray

Share this post


Link to post
Share on other sites
  lrabovetskiy said:
Hi Blu-Ray,

 

Thank you for your prompt answer.

 

I would appreciate your sending me the code. I hope I can make it into less then 150/4 indicators.

 

Thank you very much in advance,

 

Leonid

 

Here you go Leonid, I've attached two text files, just from my observation, the majority of the signals fired are the NoDem/Supp 3 and 14.

 

Cheers

 

Blu-Ray

VSA No Demand No Supply.txtFetching info...

VSA Squats.txtFetching info...

Share this post


Link to post
Share on other sites

Hi Blu Ray, thanks so much for converting them. I do plan to donate to your time if I use the code. I have a question for you. Since this is Easy Language will it work with both TS and Multi Charts? I have used neither so far, but looking at them. I would think so because both use EL? Currently I use Sierra Charts so I am attempting to do due diligence before making a forklift upgrade to a new charting platform. Thanks again. :):)

Share this post


Link to post
Share on other sites
  dandxg said:
Hi Blu Ray, thanks so much for converting them. I do plan to donate to your time if I use the code. I have a question for you. Since this is Easy Language will it work with both TS and Multi Charts? I have used neither so far, but looking at them. I would think so because both use EL? Currently I use Sierra Charts so I am attempting to do due diligence before making a forklift upgrade to a new charting platform. Thanks again. :):)

 

Thanks dandxg, I believe it should work with MultiCharts as well, hopefully a MultiCharts user here could confirm this.

 

Cheers

 

Blu-Ray

Share this post


Link to post
Share on other sites

Thanks Blu-Ray

 

43 different variations of no demand/supply, hardly a KISS system. As the indicator fires off only after 1 to 3 bars, this is a confirming system after you have done your analysis and entered your trade. Is this what TG offers as software?

Share this post


Link to post
Share on other sites
  Greycells said:
Thanks Blu-Ray

 

43 different variations of no demand/supply, hardly a KISS system. As the indicator fires off only after 1 to 3 bars, this is a confirming system after you have done your analysis and entered your trade. Is this what TG offers as software?

 

Yes there are 43 different variations, but just from my observation there's normally only 2 that will fire off ( No Demand/supply 3 & 14 ).

 

Also you are right, these are NOT buy/sell signals, just an aid to help out with the correct analysis. ( thrunner posted some links for explanations here)

 

I believe it is something very similar to what TG offers, however when PP made the original code he might have added/removed some variations.

 

Hope this helps

 

Blu-Ray

Share this post


Link to post
Share on other sites

hi Blu-Ray

 

Thank you for this nice piece of work, I'm using it daily. However the dots are somewhat misplaced and I've looked into the code to investigate it.

 

Could you please tell me the reason for calculating the following:

HT=Low - NumberofTicks*mintick;

LT=High + NumberofTicks*mintick;

 

HT? LT?

Shouldn't the dot just be placed right under lowest or upon highest and if more than one dot then displace it accordingly?

 

Have I missed something here? :hmmmm:

 

Once again, thank you for your time!

Share this post


Link to post
Share on other sites
  januson said:
hi Blu-Ray

 

Thank you for this nice piece of work, I'm using it daily. However the dots are somewhat misplaced and I've looked into the code to investigate it.

 

Could you please tell me the reason for calculating the following:

HT=Low - NumberofTicks*mintick;

LT=High + NumberofTicks*mintick;

 

HT? LT?

Shouldn't the dot just be placed right under lowest or upon highest and if more than one dot then displace it accordingly?

 

Have I missed something here? :hmmmm:

 

Once again, thank you for your time!

 

Hi januson

 

It should plot the dot above the high or low, depending on which one fired. The reason for the LT & HT were so that you could put the dot x amount of ticks above the high. If I were to just put it above the high, then depending how big you want the dot, it can cover up the high, so when you're doing analysis you then have to click on the bar to find out the true high, rather than a visual look at it.

 

If you want it on the high/low then just set the number of ticks input to 0.

 

Hope this helps

 

Blu-Ray

Edited by Blu-Ray

Share this post


Link to post
Share on other sites
  dandxg said:
Hi Blu Ray, thanks so much for converting them. I do plan to donate to your time if I use the code. I have a question for you. Since this is Easy Language will it work with both TS and Multi Charts? I have used neither so far, but looking at them. I would think so because both use EL? Currently I use Sierra Charts so I am attempting to do due diligence before making a forklift upgrade to a new charting platform. Thanks again. :):)

 

Yes, it works well in Multicharts.

Share this post


Link to post
Share on other sites

hi again..

 

I'm using MultiCharts and I think the dots are misplaced, for some strange reason they are flying to high or to low. But it's nothing to do with your code, I've just created a support question at TS Support as it must be a bug in MC.

Share this post


Link to post
Share on other sites
  januson said:
hi again..

 

I'm using MultiCharts and I think the dots are misplaced, for some strange reason they are flying to high or to low. But it's nothing to do with your code, I've just created a support question at TS Support as it must be a bug in MC.

 

 

Hi januson

 

Yes I think you're right about MC, as I've had another member mention the same problem. Unfortunately I don't have MC to test out the fault, however it seems to be working fine in TS.

 

Cheers

 

Blu-Ray

Share this post


Link to post
Share on other sites
  Blu-Ray said:
Yes I think you're right about MC, as I've had another member mention the same problem. Unfortunately I don't have MC to test out the fault, however it seems to be working fine in TS.Blu-Ray

Thanks for the indicator, BR. The problem with MC may be with scaling to symbol setting.

By default the scaling of a MC indicator is to screen, which is something TS doesn't do.

 

attachment.php?attachmentid=4719&d=1199973671

Share this post


Link to post
Share on other sites

Hi Blu-Ray,

I was looking through the code and I think I found a possible mistake. Can you verify for Plot21 and Plot22 in the file "VSA No Demand No Supply.txt". Both "if" statements for those plots contain the condition: (H[3]-L[3])<(H[3]-L[3]) which will always be evaluated as FALSE. Perhaps this is a typo???

 

Thanks,

Ben

 

  Blu-Ray said:
Here you go Leonid, I've attached two text files, just from my observation, the majority of the signals fired are the NoDem/Supp 3 and 14.

Share this post


Link to post
Share on other sites
  SBGTrading said:
Hi Blu-Ray,

I was looking through the code and I think I found a possible mistake. Can you verify for Plot21 and Plot22 in the file "VSA No Demand No Supply.txt". Both "if" statements for those plots contain the condition: (H[3]-L[3])<(H[3]-L[3]) which will always be evaluated as FALSE. Perhaps this is a typo???

 

Thanks,

Ben

 

 

Thanks Ben for pointing that out, yes it is a mistake :doh:

 

the code should read " (H[3]-L[3])<(H[4]-L[4]) ".

 

I've attached the modified ELD ( Hopefully James or a Mod could move it to the front page )

 

Thanks again

 

Blu-Ray

VSA_NODEM_NOSUPP.ELDFetching info...

Share this post


Link to post
Share on other sites
  Blu-Ray said:
Thanks Ben for pointing that out, yes it is a mistake :doh:

 

the code should read " (H[3]-L[3])<(H[4]-L[4]) ".

 

I've attached the modified ELD ( Hopefully James or a Mod could move it to the front page )

 

Thanks again

 

Blu-Ray

 

Fixed. Thanks.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Topics

  • Posts

    • Date: 8th April 2025.   Markets Rebound Cautiously as US-China Tariff Tensions Deepen     Global markets staged a tentative recovery on Tuesday following a wave of volatility sparked by escalating trade tensions between the United States and China. The Asia-Pacific region showed signs of stability after a chaotic start to the week—though some pockets remained under pressure. Taiwan’s Taiex dropped 4.4%, dragged lower by losses in tech heavyweight TSMC. The world’s largest chipmaker fell another 4% on Tuesday and has now slumped 13.5% since April 2, when US President Donald Trump first unveiled what he called ‘Liberation Day’ tariffs.   However, broader sentiment across the region turned more positive, with several markets rebounding sharply after Monday’s dramatic sell-offs. Japan’s Nikkei 225 surged over 6% in early trading, rebounding from an 18-month low. South Korea’s Kospi rose marginally, and Australia’s ASX 200 gained 1.9%, driven by strength in mining stocks. Hong Kong’s Hang Seng rose 1.6%, though still far from recovering from Monday’s 13.2% crash—its worst day since the 1997 Asian financial crisis. China’s Shanghai Composite added 0.9%.   In Europe, DAX and FTSE 100 are up more than 1% in opening trade. EU Commission President von der Leyen repeated yesterday that the EU had offered reciprocal zero tariffs on manufactured goods previously and continues to stand by that offer. Others are also trying again to talk to Trump to get some sort of agreement that limits the impact.   Much of the rally appeared to be driven by dip-buying, as well as hopes that the intensifying trade war could still be defused through negotiations.   China Strikes Back: ‘We Will Fight to the End’   Tensions reached a boiling point after Trump threatened to impose an additional 50% tariff on all Chinese imports unless Beijing rolled back its retaliatory measures by April 8. ‘If China does not withdraw its 34% increase above their already long-term trading abuses by tomorrow... the United States will impose additional tariffs on China of 50%,’ Trump declared on social media.   If implemented, the new tariffs would bring total US duties on Chinese goods to a staggering 124%, factoring in the existing 20%, the 34% recently announced, and the proposed 50%.   In response, China’s Ministry of Commerce issued a stern warning, stating: ‘The US threat to escalate tariffs is a mistake on top of a mistake... If the US insists on its own way, China will fight to the end.’ The ministry also called for equal and respectful dialogue, though signs of compromise on either side remain scarce.   Beijing acted quickly to contain a market fallout. State funds intervened to support equities, and the People’s Bank of China set the yuan fixing at its weakest level since September 2023 to boost export competitiveness. Additionally, five-year interest rate swaps in China fell to their lowest levels since 2020, indicating potential for further monetary easing.   Trump Talks Tough on EU Too   Trump’s hardline approach extended beyond China. Speaking at a press conference, he rejected the European Union’s offer to eliminate tariffs on cars and industrial goods, accusing the bloc of ‘being very bad to us.’ He insisted that Europe would need to source its energy from the US, claiming the US could ‘knock off $350 billion in one week.’   The EU, meanwhile, backed away from a proposed 50% retaliatory tariff on American whiskey, opting instead for 25% duties on selected US goods in response to Trump’s steel and aluminium tariffs.     Volatile Wall Street Adds to the Drama   Wall Street experienced wild swings on Monday as investors processed the rapidly evolving trade conflict. The S&P 500 briefly fell 4.7% before rebounding 3.4%, nearly erasing its losses in what could have been its biggest one-day jump in years—if it had held. The Dow Jones Industrial Average sank by as much as 1,700 points early in the day but later climbed nearly 900 points before closing 349 points lower, down 0.9%. The Nasdaq ended up 0.1%.   The brief rally was fueled by a false rumour that Trump was considering a 90-day pause on tariffs—rumours that the White House quickly labelled ‘fake news.’ The market's sharp reaction underscored how desperate investors are for any sign that tensions might ease.   Oil Markets in Focus: Goldman Sachs Revises Forecasts   Crude prices also reflected the uncertainty, with US crude briefly dipping below $60 per barrel for the first time since 2021. As of early Tuesday, Brent crude was trading at $64.72, while WTI hovered around $61.26.   Goldman Sachs, in a note dated April 7, lowered its average price forecasts for Brent and WTI through 2025 and 2026, citing mounting recession risks and the potential for higher-than-expected supply from OPEC+.       Under a base-case scenario where the US avoids a recession and tariffs are reduced significantly before the April 9 implementation date, Goldman sees Brent at $62 per barrel and WTI at $58 by December 2025. These figures fall further to $55 and $51, respectively, by the end of 2026. This outlook also assumes moderate output increases from eight OPEC+ countries, with incremental boosts of 130,000–140,000 barrels per day in June and July.   However, should the US slip into a typical recession and OPEC production aligns with the bank’s baseline assumptions, Brent could retreat to $58 by the end of this year and to $50 by December 2026.   In a more bearish scenario involving a global GDP slowdown and no change to OPEC+ output levels, Brent prices might fall to $54 by year-end and $45 by late 2026. The most extreme projection—based on a simultaneous economic downturn and a full reversal of OPEC+ production cuts—would see Brent plunge to below $40 per barrel by the end of 2026.   Goldman noted that oil prices could outperform forecasts significantly if there was a dramatic shift in tariff policy and a surprise in global demand recovery.   Cautious Optimism, But Warnings Persist   With both Washington and Beijing showing no signs of backing down, markets are likely to remain volatile in the days ahead. Investors now turn their attention to upcoming trade meetings and policy decisions, hoping for clarity in what has become one of the most unpredictable trading environments in recent years.   Always trade with strict risk management. Your capital is the single most important aspect of your trading business.   Please note that times displayed based on local time zone and are from time of writing this report. Click HERE to access the full HFM Economic calendar.   Want to learn to trade and analyse the markets? Join our webinars and get analysis and trading ideas combined with better understanding of how markets work. Click HERE to register for FREE!   Click HERE to READ more Market news.   Andria Pichidi HFMarkets   Disclaimer: This material is provided as a general marketing communication for information purposes only and does not constitute an independent investment research. Nothing in this communication contains, or should be considered as containing, an investment advice or an investment recommendation or a solicitation for the purpose of buying or selling of any financial instrument. All information provided is gathered from reputable sources and any information containing an indication of past performance is not a guarantee or reliable indicator of future performance. Users acknowledge that any investment in Leveraged Products is characterized by a certain degree of uncertainty and that any investment of this nature involves a high level of risk for which the users are solely responsible and liable. We assume no liability for any loss arising from any investment made based on the information provided in this communication. This communication must not be reproduced or further distributed without our prior written permission.
    • CVNA Carvana stock watch, rebound to 166.56 support area at https://stockconsultant.com/?CVNA
    • CVNA Carvana stock watch, rebound to 166.56 support area at https://stockconsultant.com/?CVNA
    • CVNA Carvana stock watch, rebound to 166.56 support area at https://stockconsultant.com/?CVNA
    • CVNA Carvana stock watch, rebound to 166.56 support area at https://stockconsultant.com/?CVNA
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.