Jump to content

Welcome to the new Traders Laboratory! Please bear with us as we finish the migration over the next few days. If you find any issues, want to leave feedback, get in touch with us, or offer suggestions please post to the Support forum here.

  • Welcome Guests

    Welcome. You are currently viewing the forum as a guest which does not give you access to all the great features at Traders Laboratory such as interacting with members, access to all forums, downloading attachments, and eligibility to win free giveaways. Registration is fast, simple and absolutely free. Create a FREE Traders Laboratory account here.

Blu-Ray

VSA - No Demand/No Supply & Squats

Recommended Posts

A special thanks to PivotProfiler for providing the code for VT, unfortunately I volunteered to translate it into Tradestation. Three weeks later and I'm finally finished. Apologies for the delay but Tradestation doesn't allow future referencing which the code did, so I had to individually make it backwards compatible.

 

For example VT code :

 

c>ref(c,+3) had to become c[3]>c in EasyLanguage.................and doing this for over 150 plots :bang head:

 

Most of the plots require at least 1 bar for confirmation, so I've coded the indicator to show, for example, "No Demand3(1)" in the data window to let you know that it required 1 bar for confirmation before the indicator plotted ( handy for looking over previous charts as well ).

 

I've also coded in Alerts into each one, so all you have to do is format the indicator and enable the Alerts if desired.

 

I've split the code into two ELD's, one for No Demand/Supply and the other for squats.

 

I've also included an input so you can adjust the number of ticks above/below the high/low you want the indicator to plot. Here's a pic of some examples:

 

Hope this helps

 

Blu-Ray

 

attachment.php?attachmentid=5194&stc=1&d=1202860506

 

attachment.php?attachmentid=5193&stc=1&d=1202860506

VSA.thumb.png.d92021e1170b0576d8e34f7c22cda158.png

Alerts.png.4e78f2059aa38d5a0273b380c093670f.png

VSA_SQUATS.ELDFetching info...

vsa-no-demand-no-supply.eldFetching info...

Share this post


Link to post
Share on other sites

Please forgive my ignorance Blu-Ray but could you explain what the numbers on No demand/No supply ranging from 1 to 43 indicate, also what does the bracketed (1) mean?

 

Do I take it that the Squat is part of the Bill Williams system ? This also has numbers ranging from 1 to 35?

Share this post


Link to post
Share on other sites
  Greycells said:
Please forgive my ignorance Blu-Ray but could you explain what the numbers on No demand/No supply ranging from 1 to 43 indicate, also what does the bracketed (1) mean?

 

Do I take it that the Squat is part of the Bill Williams system ? This also has numbers ranging from 1 to 35?

 

Greycells

 

The numbers indicating 1 -43 are the different variations of how to come up with a no demand/ no supply.

 

I'm unsure on the squat question as it was PivotProfiler's code, all I have done is to translate it into TS.

 

Hope this helps

 

Blu-Ray

Share this post


Link to post
Share on other sites
  lrabovetskiy said:
Hi Blu-Ray,

 

Thank you very much for providing the indicator. Is it going to work for TS2000i as well?It does not recognize .eld extension.

 

Thank you,

 

Leonid

 

Hi Leonid

 

I don't think it will work, as I'm pretty sure TS2000i only allows 4 plots per indicator and these have over 150 plots, also you can only import ELA files. not ELD's.

 

You could alternatively split it into loads of indicators if you wanted, let me know and I'll attach a text file of the code.

 

Hope this helps

 

Blu-Ray

Share this post


Link to post
Share on other sites
  lrabovetskiy said:
Hi Blu-Ray,

 

Thank you for your prompt answer.

 

I would appreciate your sending me the code. I hope I can make it into less then 150/4 indicators.

 

Thank you very much in advance,

 

Leonid

 

Here you go Leonid, I've attached two text files, just from my observation, the majority of the signals fired are the NoDem/Supp 3 and 14.

 

Cheers

 

Blu-Ray

VSA No Demand No Supply.txtFetching info...

VSA Squats.txtFetching info...

Share this post


Link to post
Share on other sites

Hi Blu Ray, thanks so much for converting them. I do plan to donate to your time if I use the code. I have a question for you. Since this is Easy Language will it work with both TS and Multi Charts? I have used neither so far, but looking at them. I would think so because both use EL? Currently I use Sierra Charts so I am attempting to do due diligence before making a forklift upgrade to a new charting platform. Thanks again. :):)

Share this post


Link to post
Share on other sites
  dandxg said:
Hi Blu Ray, thanks so much for converting them. I do plan to donate to your time if I use the code. I have a question for you. Since this is Easy Language will it work with both TS and Multi Charts? I have used neither so far, but looking at them. I would think so because both use EL? Currently I use Sierra Charts so I am attempting to do due diligence before making a forklift upgrade to a new charting platform. Thanks again. :):)

 

Thanks dandxg, I believe it should work with MultiCharts as well, hopefully a MultiCharts user here could confirm this.

 

Cheers

 

Blu-Ray

Share this post


Link to post
Share on other sites

Thanks Blu-Ray

 

43 different variations of no demand/supply, hardly a KISS system. As the indicator fires off only after 1 to 3 bars, this is a confirming system after you have done your analysis and entered your trade. Is this what TG offers as software?

Share this post


Link to post
Share on other sites
  Greycells said:
Thanks Blu-Ray

 

43 different variations of no demand/supply, hardly a KISS system. As the indicator fires off only after 1 to 3 bars, this is a confirming system after you have done your analysis and entered your trade. Is this what TG offers as software?

 

Yes there are 43 different variations, but just from my observation there's normally only 2 that will fire off ( No Demand/supply 3 & 14 ).

 

Also you are right, these are NOT buy/sell signals, just an aid to help out with the correct analysis. ( thrunner posted some links for explanations here)

 

I believe it is something very similar to what TG offers, however when PP made the original code he might have added/removed some variations.

 

Hope this helps

 

Blu-Ray

Share this post


Link to post
Share on other sites

hi Blu-Ray

 

Thank you for this nice piece of work, I'm using it daily. However the dots are somewhat misplaced and I've looked into the code to investigate it.

 

Could you please tell me the reason for calculating the following:

HT=Low - NumberofTicks*mintick;

LT=High + NumberofTicks*mintick;

 

HT? LT?

Shouldn't the dot just be placed right under lowest or upon highest and if more than one dot then displace it accordingly?

 

Have I missed something here? :hmmmm:

 

Once again, thank you for your time!

Share this post


Link to post
Share on other sites
  januson said:
hi Blu-Ray

 

Thank you for this nice piece of work, I'm using it daily. However the dots are somewhat misplaced and I've looked into the code to investigate it.

 

Could you please tell me the reason for calculating the following:

HT=Low - NumberofTicks*mintick;

LT=High + NumberofTicks*mintick;

 

HT? LT?

Shouldn't the dot just be placed right under lowest or upon highest and if more than one dot then displace it accordingly?

 

Have I missed something here? :hmmmm:

 

Once again, thank you for your time!

 

Hi januson

 

It should plot the dot above the high or low, depending on which one fired. The reason for the LT & HT were so that you could put the dot x amount of ticks above the high. If I were to just put it above the high, then depending how big you want the dot, it can cover up the high, so when you're doing analysis you then have to click on the bar to find out the true high, rather than a visual look at it.

 

If you want it on the high/low then just set the number of ticks input to 0.

 

Hope this helps

 

Blu-Ray

Edited by Blu-Ray

Share this post


Link to post
Share on other sites
  dandxg said:
Hi Blu Ray, thanks so much for converting them. I do plan to donate to your time if I use the code. I have a question for you. Since this is Easy Language will it work with both TS and Multi Charts? I have used neither so far, but looking at them. I would think so because both use EL? Currently I use Sierra Charts so I am attempting to do due diligence before making a forklift upgrade to a new charting platform. Thanks again. :):)

 

Yes, it works well in Multicharts.

Share this post


Link to post
Share on other sites

hi again..

 

I'm using MultiCharts and I think the dots are misplaced, for some strange reason they are flying to high or to low. But it's nothing to do with your code, I've just created a support question at TS Support as it must be a bug in MC.

Share this post


Link to post
Share on other sites
  januson said:
hi again..

 

I'm using MultiCharts and I think the dots are misplaced, for some strange reason they are flying to high or to low. But it's nothing to do with your code, I've just created a support question at TS Support as it must be a bug in MC.

 

 

Hi januson

 

Yes I think you're right about MC, as I've had another member mention the same problem. Unfortunately I don't have MC to test out the fault, however it seems to be working fine in TS.

 

Cheers

 

Blu-Ray

Share this post


Link to post
Share on other sites
  Blu-Ray said:
Yes I think you're right about MC, as I've had another member mention the same problem. Unfortunately I don't have MC to test out the fault, however it seems to be working fine in TS.Blu-Ray

Thanks for the indicator, BR. The problem with MC may be with scaling to symbol setting.

By default the scaling of a MC indicator is to screen, which is something TS doesn't do.

 

attachment.php?attachmentid=4719&d=1199973671

Share this post


Link to post
Share on other sites

Hi Blu-Ray,

I was looking through the code and I think I found a possible mistake. Can you verify for Plot21 and Plot22 in the file "VSA No Demand No Supply.txt". Both "if" statements for those plots contain the condition: (H[3]-L[3])<(H[3]-L[3]) which will always be evaluated as FALSE. Perhaps this is a typo???

 

Thanks,

Ben

 

  Blu-Ray said:
Here you go Leonid, I've attached two text files, just from my observation, the majority of the signals fired are the NoDem/Supp 3 and 14.

Share this post


Link to post
Share on other sites
  SBGTrading said:
Hi Blu-Ray,

I was looking through the code and I think I found a possible mistake. Can you verify for Plot21 and Plot22 in the file "VSA No Demand No Supply.txt". Both "if" statements for those plots contain the condition: (H[3]-L[3])<(H[3]-L[3]) which will always be evaluated as FALSE. Perhaps this is a typo???

 

Thanks,

Ben

 

 

Thanks Ben for pointing that out, yes it is a mistake :doh:

 

the code should read " (H[3]-L[3])<(H[4]-L[4]) ".

 

I've attached the modified ELD ( Hopefully James or a Mod could move it to the front page )

 

Thanks again

 

Blu-Ray

VSA_NODEM_NOSUPP.ELDFetching info...

Share this post


Link to post
Share on other sites
  Blu-Ray said:
Thanks Ben for pointing that out, yes it is a mistake :doh:

 

the code should read " (H[3]-L[3])<(H[4]-L[4]) ".

 

I've attached the modified ELD ( Hopefully James or a Mod could move it to the front page )

 

Thanks again

 

Blu-Ray

 

Fixed. Thanks.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Topics

  • Posts

    • Date: 3rd April 2025.   Gold Prices Pull Back After Record High as Traders Eye Trump’s Tariffs.   Key Takeaways:   Gold prices retreated after hitting a record high of $3,167.57 per ounce due to profit-taking. President Trump announced a 10% baseline tariff on all US imports, escalating trade tensions. Gold remains exempt from reciprocal tariffs, reinforcing its safe-haven appeal. Investors await US non-farm payroll data for further market direction. Fed rate cut bets and weaker US Treasury yields underpin gold’s bullish outlook. Gold Prices Retreat from Record Highs Amid Profit-Taking Gold prices saw a pullback on Thursday as traders opted to take profits following a historic surge. Spot gold declined 0.4% to $3,122.10 per ounce as of 0710 GMT, retreating from its fresh all-time high of $3,167.57. Meanwhile, US gold futures slipped 0.7% to $3,145.00 per ounce, reflecting broader market uncertainty over economic and geopolitical developments.   The recent rally was largely fueled by concerns over escalating trade tensions after President Donald Trump unveiled sweeping new import tariffs. The 10% baseline tariff on all goods entering the US further deepened the global trade conflict, intensifying investor demand for safe-haven assets like gold. However, as traders locked in gains from the surge, prices saw a modest retracement.   Trump’s Tariffs and Their Market Implications On Wednesday, Trump introduced a sweeping tariff policy imposing a 10% baseline duty on all imports, with significantly higher tariffs on select nations. While this move was aimed at bolstering domestic manufacturing, it sent shockwaves across global markets, fueling inflation concerns and heightening trade war fears.   Gold’s Role Amid Trade War Escalations Despite the widespread tariff measures, the White House clarified that reciprocal tariffs do not apply to gold, energy, and ‘certain minerals that are not available in the US’. This exemption suggests that central banks and institutional investors may continue favouring gold as a hedge against economic instability. One of the key factors supporting gold is the slowdown that these tariffs could cause in the US economy, which raises the likelihood of future Federal Reserve rate cuts. Gold is currently in a pure momentum trade. Market participants are on the sidelines and until we see a significant shakeout, this momentum could persist.   Impact on the US Dollar and Bond Yields Gold prices typically move inversely to the US dollar, and the latest developments have pushed the dollar to its weakest level since October 2024. Market participants are increasingly pricing in the possibility of a Fed rate cut, as the tariffs could weigh on economic growth.   Additionally, US Treasury yields have plummeted, reflecting growing recession fears. Lower bond yields reduce the opportunity cost of holding non-yielding assets like gold, making it a more attractive investment.         Technical Analysis: Key Levels to Watch Gold’s recent rally has pushed it into overbought territory, with the Relative Strength Index (RSI) above 70. This indicates a potential short-term pullback before the uptrend resumes. The immediate support level lies at $3,115, aligning with the Asian session low. A further decline could bring gold towards the $3,100 psychological level, which has previously acted as a strong support zone. Below this, the $3,076–$3,057 region represents a critical weekly support range where buyers may re-enter the market. In the event of a more significant correction, $3,000 stands as a major psychological floor.   On the upside, gold faces immediate resistance at $3,149. A break above this level could signal renewed bullish momentum, potentially leading to a retest of the record high at $3,167. If bullish momentum persists, the next target is the $3,200 psychological barrier, which could pave the way for further gains. Despite the recent pullback, the broader trend remains bullish, with dips likely to be viewed as buying opportunities.   Looking Ahead: Non-Farm Payrolls and Fed Policy Traders are closely monitoring Friday’s US non-farm payrolls (NFP) report, which could provide critical insights into the Federal Reserve’s next policy moves. A weaker-than-expected jobs report may strengthen expectations for an interest rate cut, further boosting gold prices.   Other key economic data releases, such as jobless claims and the ISM Services PMI, may also impact market sentiment in the short term. However, with rising geopolitical uncertainties, trade tensions, and a weakening US dollar, gold’s safe-haven appeal remains strong.   Conclusion: While short-term profit-taking may trigger minor corrections, gold’s long-term outlook remains bullish. As global trade tensions mount and the Federal Reserve leans toward a more accommodative stance, gold could see further gains in the months ahead.   Always trade with strict risk management. Your capital is the single most important aspect of your trading business.   Please note that times displayed based on local time zone and are from time of writing this report.   Click HERE to access the full HFM Economic calendar.   Want to learn to trade and analyse the markets? Join our webinars and get analysis and trading ideas combined with better understanding of how markets work. Click HERE to register for FREE!   Click HERE to READ more Market news.   Andria Pichidi HFMarkets   Disclaimer: This material is provided as a general marketing communication for information purposes only and does not constitute an independent investment research. Nothing in this communication contains, or should be considered as containing, an investment advice or an investment recommendation or a solicitation for the purpose of buying or selling of any financial instrument. All information provided is gathered from reputable sources and any information containing an indication of past performance is not a guarantee or reliable indicator of future performance. Users acknowledge that any investment in Leveraged Products is characterized by a certain degree of uncertainty and that any investment of this nature involves a high level of risk for which the users are solely responsible and liable. We assume no liability for any loss arising from any investment made based on the information provided in this communication. This communication must not be reproduced or further distributed without our prior written permission.
    • AMZN Amazon stock, nice buying at the 187.26 triple+ support area at https://stockconsultant.com/?AMZN
    • DELL Dell Technologies stock, good day moving higher off the 90.99 double support area, from Stocks to Watch at https://stockconsultant.com/?DELL
    • MCK Mckesson stock, nice trend and continuation breakout at https://stockconsultant.com/?MCK
    • lmfx just officially launched their own LMGX token, Im planning to grab a couple of hundred and maybe have the option to stake them. 
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.