Jump to content

Welcome to the new Traders Laboratory! Please bear with us as we finish the migration over the next few days. If you find any issues, want to leave feedback, get in touch with us, or offer suggestions please post to the Support forum here.

  • Welcome Guests

    Welcome. You are currently viewing the forum as a guest which does not give you access to all the great features at Traders Laboratory such as interacting with members, access to all forums, downloading attachments, and eligibility to win free giveaways. Registration is fast, simple and absolutely free. Create a FREE Traders Laboratory account here.

wsam29

Linear Regression Channel

Recommended Posts

I have no clue how to upload the indicator so I'll just post the coding.

 

[LegacyColorValue = true];

{Updated by DJ Reda on Sat 4/16/05

Added option to use either Standard Deviation or Standard Error of Estimate to plotchannel bands}

{ // Note: Setting a begin date that is earlier than the amount of length for the regression

will produce an extend to the left model that is date and time restricted

The End Date must not be in the future // }

 

inputs:

STD1_SEE2(2),

Length ( 50), { // Length of Linear Regression // }

Size(1),//Trend Line Thickness

BeginDate ( 0), { // Choose Zero to use full length // }

BeginTime ( 0), { // Choose Zero to use full time // }

EndDate ( 0), { // Choose Zero for Current Day // }

EndTime ( 0), { // Choose Zero for Current Time // }

NumDevsUp ( 2), { // Standard deviations for upper // }

NumDevsDn ( -2), { // Standard deviations for lower // }

LRColor ( Green), { // Color for Linear Regression Line // }

STDDevColor( Magenta), { // Color for Upper Boundary // }

SEEColor(Magenta) , { // Color for Lower Boundary // }

ExtRight ( false), { // Set to true to extend to right // }

ExtLeft ( false); { // Set to true to extend to left // }

 

variables:

FirstDate ( 0 ),

FirstTime ( 0 ),

UpperBand ( 0 ),

LowerBand ( 0 ),

UpperBand_1 ( 0 ),

LowerBand_1 ( 0 ),

LRV ( 0 ),

LRV_1 ( 0 ),

TL_LRV ( 0 ),

TL_UB ( 0 ),

TL_LB ( 0 ),

Flag ( 0 ),

SDev ( 0 );

 

 

if BeginDate = 0 then

FirstDate = date[ Length - 1 ]

else

FirstDate = BeginDate;

 

if BeginTime = 0 then

FirstTime = time[ Length - 1 ]

else

FirstTime = BeginTime;

 

 

{ ///////////////////////////////////////////////////////////////////// }

 

if Flag = 0 then

begin

if ( EndDate = CurrentDate or EndDate = 0 ) and LastBarOnChart then

begin

LRV = LinearRegValue( Close, Length, 0 );

LRV_1 = LinearRegValue( Close, Length, Length - 1 );

{++++++++New Code to Choose between plotting Std Dev or Std Error++++++}

If STD1_SEE2 = 1 then

SDev = StandardDev( Close, Length, 1 );

If STD1_SEE2 = 2 then begin //use Standard Error of Estimate

Value1 = StdError(Close, Length);

SDEV = Value1;

end;

{++++++++End New Code++++++}

 

UpperBand = LRV + NumDevsUp * SDev;

LowerBand = LRV + NumDevsDn * SDev;

UpperBand_1 = LRV_1 + NumDevsUp * SDev;

LowerBand_1 = LRV_1 + NumDevsDn * SDev;

 

TL_LRV = TL_New( FirstDate, FirstTime, LRV_1, date, time, LRV );

TL_UB = TL_New( FirstDate, FirstTime, UpperBand_1, date, time, UpperBand );

TL_LB = TL_New( FirstDate, FirstTime, LowerBand_1, date, time, LowerBand );

 

Flag = 1 ;

end

else if date = EndDate and ( time = EndTime or EndTime = 0 ) then

begin

LRV = LinearRegValue( Close, Length, 0 );

LRV_1 = LinearRegValue( Close, Length, Length - 1 );

 

{++++++++New Code to Choose between plotting Std Dev or Std Error++++++}

If STD1_SEE2 = 1 then

SDev = StandardDev( Close, Length, 1 );

If STD1_SEE2 = 2 then begin //use Standard Error of Estimate

Value1 = StdError(Close, Length);

SDEV = Value1;

end;

{++++++++End New Code++++++}

 

UpperBand = LRV + NumDevsUp * SDev;

LowerBand = LRV + NumDevsDn * SDev;

UpperBand_1 = LRV_1 + NumDevsUp * SDev;

LowerBand_1 = LRV_1 + NumDevsDn * SDev;

 

TL_LRV = TL_New( FirstDate, FirstTime, LRV_1, date, time, LRV );

TL_UB = TL_New( FirstDate, FirstTime, UpperBand_1, date, time, UpperBand );

TL_LB = TL_New( FirstDate, FirstTime, LowerBand_1, date, time, LowerBand );

 

Flag = 2;

end;

 

if Flag = 1 or Flag = 2 then

begin

TL_SetColor( TL_LRV, LRColor );

If STD1_SEE2 = 1 then begin

TL_SetColor( TL_UB, STDDevColor );

TL_SetColor( TL_LB, STDDevColor );

end;

If STD1_SEE2 = 2 then begin

TL_SetColor( TL_UB, SEEColor );

TL_SetColor( TL_LB, SEEColor );

end;

 

TL_SetSize(TL_LRV, size);

TL_SetSize(TL_UB, size);

TL_SetSize(TL_LB, size);

 

TL_SetExtLeft( TL_LRV, ExtLeft );

TL_SetExtLeft( TL_UB, ExtLeft );

TL_SetExtLeft( TL_LB, ExtLeft );

 

 

TL_SetExtRight( TL_LRV, ExtRight );

TL_SetExtRight( TL_UB, ExtRight );

TL_SetExtRight( TL_LB, ExtRight );

end;

 

end

else

if Flag = 1 then

begin

LRV = LinearRegValue( Close, Length, 0 );

LRV_1 = LinearRegValue( Close, Length, Length - 1 );

 

{++++++++New Code to Choose between plotting Std Dev or Std Error++++++}

If STD1_SEE2 = 1 then

SDev = StandardDev( Close, Length, 1 );

If STD1_SEE2 = 2 then begin //use Standard Error of Estimate

Value1 = StdError(Close, Length);

SDEV = Value1;

end;

{++++++++End New Code++++++}

 

UpperBand = LRV + NumDevsUp * SDev;

LowerBand = LRV + NumDevsDn * SDev;

UpperBand_1 = LRV_1 + NumDevsUp * SDev;

LowerBand_1 = LRV_1 + NumDevsDn * SDev;

 

TL_SetBegin( TL_LRV, FirstDate, FirstTime, LRV_1 );

TL_SetBegin( TL_UB, FirstDate, FirstTime, UpperBand_1 );

TL_SetBegin( TL_LB, FirstDate, FirstTime, LowerBand_1 );

 

TL_SetEnd( TL_LRV, date, time, LRV );

TL_SetEnd( TL_UB, date, time, UpperBand );

TL_SetEnd( TL_LB, date, time, LowerBand );

end;

 

{ // Code modified from TradeStation indicator of LinearRegLine

by

Greg Ballard, 04/09/2003 // }

 

 

This indicator was sent to me from Pat B. from TTM

 

LRC

 

I'd attach some screen shots of how I use the LRC, but I have no clue what I'm doing.

LRC_01.thumb.jpg.fe600d59484b9c6a9be54ea4459066b9.jpg

LRC_02.thumb.jpg.1fdf27cb724afb0c6499efc41871f378.jpg

Share this post


Link to post
Share on other sites

I would like a way to use the linear regression lines like they are in eSignal, with an open source code or jump box so you can adjust the standard deviation, but coded for Tradestation. It's been proven that a linear regression/standard deviation of plus and minus 2 usually contains about 90% of the range of a stock, and a LR/SD +-3 contains approx. 98% of the range, so I'd like the code please for Tradestation 8.3 for those linear regression channels, but where it's comparable to eSigs and objective and draws the lines over the whole chart monthly, weekly etc., not like Tradestations that is subjective to where you have to put it in like Fib channels and twist it to make it fit, and can start out (on TS charts) from a place that is incorrect. If someone has some TS codes for objective lines for a whole chart for LR/SD +-2 and +-3, that would be great, and I would really appreciate it, and if it could be open source so it could be changed for LR/SD lines for charts for whatever you want, +-1, 1.5, 2.5, etc, some stocks deviate more or less than others, and you can find the outer reaches to which a stock has always been contained in(tempted to get eSig just for that and cleaner charts/trendlines), and would help to see why a stock stops in it's tracks to the bottom or top, even when it seems like it has broken out, or down.

 

Curtis

Share this post


Link to post
Share on other sites
Guest forsearch
I would like a way to use the linear regression lines like they are in eSignal, with an open source code or jump box so you can adjust the standard deviation, but coded for Tradestation. It's been proven that a linear regression/standard deviation of plus and minus 2 usually contains about 90% of the range of a stock, and a LR/SD +-3 contains approx. 98% of the range, so I'd like the code please for Tradestation 8.3 for those linear regression channels, but where it's comparable to eSigs and objective and draws the lines over the whole chart monthly, weekly etc., not like Tradestations that is subjective to where you have to put it in like Fib channels and twist it to make it fit, and can start out (on TS charts) from a place that is incorrect. If someone has some TS codes for objective lines for a whole chart for LR/SD +-2 and +-3, that would be great, and I would really appreciate it, and if it could be open source so it could be changed for LR/SD lines for charts for whatever you want, +-1, 1.5, 2.5, etc, some stocks deviate more or less than others, and you can find the outer reaches to which a stock has always been contained in(tempted to get eSig just for that and cleaner charts/trendlines), and would help to see why a stock stops in it's tracks to the bottom or top, even when it seems like it has broken out, or down.

 

Curtis

 

OK. We'll get right on that for ya, mate. :rofl:

 

BTW, have you tried looking over at the TS forum? You might find your answer there as well....:crap:

Share this post


Link to post
Share on other sites

Thanks for replying, sorry it took a little while to get back to you, I work nights and trade during the day. Guess what I'm looking for is a standard deviation channel like on this page:

http://ta.mql4.com/linestudies/standard_deviation_channel, based on a linear regression line, not an indicator or oscillator, but an overlay like Bollinger Bands or moving averages. The one at TS is hard to use and when I stretch regression channels around a linear regression line, no matter how skinny or wide I make the channel, it always says 2 SD (Open).

 

Investor/RT has another page which demonstrates what I'm looking for here:

http://www.linnsoft.com/tour/techind/linReg.htm, and I can put them in individually in TS if that's what it takes one by one, that's how I had to change parameters on slow shotastics and RSI to 5, 7, and 21, had to copy the original page and just change the numbers for different RSI screens.

 

Inv.R/T also has a follow-up page which shows linear regression forecast/bands similar to Bollinger bands for the E-mini; I don't do futures, just stocks & options, but this looks promising. The E-mini example of the linear reg. forecast/bands is at http://www.linnsoft.com/tour/techind/linRegForecast.htm, which shows this example: http://www.linnsoft.com/tour/techind/images/lrfKessler.jpg.

 

There is an Amibroker page with good ideas for a formula:http://www.amibroker.com/library/detail.php?id=438&hilite=IIF,

just need one for TS, and like I mentioned, I could change the individual #s and set up different Easy Language Documentsto be used like Bol. Bands if need be for each one like LR/SD 1, 1.5, 2.5, 3, 3.5, just would like a code for a linear regression with 2 standard deviations plotted off of it, just need a low number period to work with because I'll mostly be looking at it weekly and monthly more than that.

 

Esig has a page with people discussing formulas for plotting it, but they have and easy way with jumpboxes to adjust LR and SD and standard error to whatever you want, and the moving linear regression is not necessary, just would like cleaner pre-plotted LR/SD that I can change to gauge more about stocks and the market. Thanks for your help in advance, have to go to work right after the market closes like Tue. again today.

 

Curtis

Share this post


Link to post
Share on other sites

I would like a code for a chart overlay of standard deviation channels built on a base of a linear regression trend like Bollinger bands, with 2 standard deviations above and below the LR line. When it is attempted on TS, it's hard to use, unlike eSig and a few other platforms I've used before, which make it easy with jumpboxes where you can change the SD to 1, 2, 3, 5, 1.5,etc., and eSig has standard error. On TS, I can plot an objective LR line on daily, weekly, and monthly charts, the longer time frame seems more reliable, and when I try to use the regression channels with it, no matter how very skinny or extremely wide I make the channels, it always says 2 SD (Open), and I know that's not right. Metastock, Amibroker, Investor R/T, Esig has the best one, but they all have easy ways to plot the LR/SD +-2, 1, 3 overlays on charts, or whatever you want, but TS doesn't. Can you make a formula for a concrete overlay LR/SD channel of +-2 above and below a LR line so I can use it for D, W, and most important to me monthly charts, and show me where to change to couple-5 #s in the equation so I can make several screens of a few different numbers, sure there is no way to make a jumpbox like in other platforms. This is what I hope it will look like:

 

http://www.onlinetradingconcepts.com/TechnicalAnalysis/LinRegChannel.html

 

Except with the SD of 2 instead of 1.....Thanks in advance and I'll check back in another day or so, have to work nights again tomorrow, and am glued to the marker during the weekdays.

 

Curtis

Share this post


Link to post
Share on other sites

Thanks for posting that wsam29. That code does work, but I tried to change it to +3 & -3 standard deviation and just changed the #s on lines 8 and 9 that say NumDevsUp and NumDevsDn. Is that right or do I need to change other numbers in the code? Also the channel only works at the very right side of the charts, is there a way to get it to go all the way across the chart, mainly use it on monthly and weekly charts. Thanks for any help.

 

Curtis

Share this post


Link to post
Share on other sites

Hi Guys,

 

I am not very good at all with paisting indicators in multicharts, can someone please tell me how to copy and past that code into multicharts or maybe post the indicator.

Many thanks,

email

Share this post


Link to post
Share on other sites
Hi Guys,

I am not very good at all with paisting indicators in multicharts, can someone please tell me how to copy and past that code into multicharts or maybe post the indicator.

Many thanks,

email

 

 

Open PowerEditor,

 

select File > New

 

enter indicator name,

 

paste in code.

 

click Compile

Share this post


Link to post
Share on other sites

dear

I am not very good at all with paisting indicators in multicharts, could someone please just post the indicator.( EazyLanguageDocumenFile)

 

thank you very much

Share this post


Link to post
Share on other sites

dear traders

I am very bad at all with paisting indicators in multicharts, could someone please just post the indicator.( EazyLanguageDocumen File)

 

thank you very much

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Topics

  • Posts

    • Thx for reminding us... I don't bang that drum often enough anymore Another part for consideration is who that money initially went to...
    • TDUP ThredUp stock, watch for a top of range breakout above 2.94 at https://stockconsultant.com/?TDUP
    • How long does it take to receive HFM's withdrawal via Skrill? less than 24H?
    • My wife Robin just wanted some groceries.   Simple enough.   She parked the car for fifteen minutes, and returned to find a huge scratch on the side.   Someone keyed her car.   To be clear, this isn’t just any car.   It’s a Cybertruck—Elon Musk's stainless-steel spaceship on wheels. She bought it back in 2021, before Musk became everyone's favorite villain or savior.   Someone saw it parked in a grocery lot and felt compelled to carve their hatred directly into the metal.   That's what happens when you stand out.   Nobody keys a beige minivan.   When you're polarizing, you're impossible to ignore. But the irony is: the more attention something has, the harder it is to find the truth about it.   What’s Elon Musk really thinking? What are his plans? What will happen with DOGE? Is he deserving of all of this adoration and hate? Hard to say.   Ideas work the same way.   Take tariffs, for example.   Tariffs have become the Cybertrucks of economic policy. People either love them or hate them. Even if they don’t understand what they are and how they work. (Most don’t.)   That’s why, in my latest podcast (link below), I wanted to explore the “in-between” truth about tariffs.   And like Cybertrucks, I guess my thoughts on tariffs are polarizing.   Greg Gutfield mentioned me on Fox News. Harvard professors hate me now. (I wonder if they also key Cybertrucks?)   But before I show you what I think about tariffs… I have to mention something.   We’re Headed to Austin, Texas This weekend, my team and I are headed to Austin. By now, you should probably know why.   Yes, SXSW is happening. But my team and I are doing something I think is even better.   We’re putting on a FREE event on “Tech’s Turning Point.”   AI, quantum, biotech, crypto, and more—it’s all on the table.   Just now, we posted a special webpage with the agenda.   Click here to check it out and add it to your calendar.   The Truth About Tariffs People love to panic about tariffs causing inflation.   They wave around the ghost of the Smoot-Hawley Tariff from the Great Depression like it’s Exhibit A proving tariffs equal economic collapse.   But let me pop this myth:   Tariffs don’t cause inflation. And no, I'm not crazy (despite what angry professors from Harvard or Stanford might tweet at me).   Here's the deal.   Inflation isn’t when just a couple of things become pricier. It’s when your entire shopping basket—eggs, shirts, Netflix subscriptions, bananas, everything—starts costing more because your money’s worth less.   Inflation means your dollars aren’t stretching as far as they used to.   Take the 1800s.   For nearly a century, 97% of America’s revenue came from tariffs. Income tax? Didn’t exist. And guess what inflation was? Basically zero. Maybe 1% a year.   The economy was booming, and tariffs funded nearly everything. So, why do people suddenly think tariffs cause inflation today?   Tariffs are taxes on imports, yes, but prices are set by supply and demand—not tariffs.   Let me give you a simple example.   Imagine fancy potato chips from Canada cost $10, and a 20% tariff pushes that to $12. Everyone panics—prices rose! Inflation!   Nope.   If I only have $100 to spend and the price of my favorite chips goes up, I either stop buying chips or I buy, say, fewer newspapers.   If everyone stops buying newspapers because they’re overspending on chips, newspapers lower their prices or go out of business.   Overall spending stays the same, and inflation doesn’t budge.   Three quick scenarios:   We buy pricier chips, but fewer other things: Inflation unchanged. Manufacturers shift to the U.S. to avoid tariffs: Inflation unchanged (and more jobs here). We stop buying fancy chips: Prices drop again. Inflation? Still unchanged. The only thing that actually causes inflation is printing money.   Between 2020 and 2022 alone, 40% of all money ever created in history appeared overnight.   That’s why inflation shot up afterward—not because of tariffs.   Back to tariffs today.   Still No Inflation Unlike the infamous Smoot-Hawley blanket tariff (imagine Oprah handing out tariffs: "You get a tariff, and you get a tariff!"), today's tariffs are strategic.   Trump slapped tariffs on chips from Taiwan because we shouldn’t rely on a single foreign supplier for vital tech components—especially if that supplier might get invaded.   Now Taiwan Semiconductor is investing $100 billion in American manufacturing.   Strategic win, no inflation.   Then there’s Canada and Mexico—our friendly neighbors with weirdly huge tariffs on things like milk and butter (299% tariff on butter—really, Canada?).   Trump’s not blanketing everything with tariffs; he’s pressuring trade partners to lower theirs.   If they do, everybody wins. If they don’t, well, then we have a strategic trade chess game—but still no inflation.   In short, tariffs are about strategy, security, and fairness—not inflation.   Yes, blanket tariffs from the Great Depression era were dumb. Obviously. Today's targeted tariffs? Smart.   Listen to the whole podcast to hear why I think this.   And by the way, if you see a Cybertruck, don’t key it. Robin doesn’t care about your politics; she just likes her weird truck.   Maybe read a good book, relax, and leave cars alone.   (And yes, nobody keys Volkswagens, even though they were basically created by Hitler. Strange world we live in.) Source: https://altucherconfidential.com/posts/the-truth-about-tariffs-busting-the-inflation-myth    Profits from free accurate cryptos signals: https://www.predictmag.com/       
    • No, not if you are comparing apples to apples. What we call “poor” is obviously a pretty high bar but if you’re talking about like a total homeless shambling skexie in like San Fran then, no. The U.S.A. in not particularly kind to you. It is not an abuse so much as it is a sad relatively minor consequence of our optimism and industriousness.   What you consider rich changes with circumstances obviously. If you are genuinely poor in the U.S.A., you experience a quirky hodgepodge of unhelpful and/or abstract extreme lavishnesses while also being alienated from your social support network. It’s about the same as being a refugee. For a fraction of the ‘kindness’ available to you in non bio-available form, you could have simply stayed closer to your people and been MUCH better off.   It’s just a quirk of how we run the place and our values; we are more worried about interfering with people’s liberty and natural inclination to do for themselves than we are about no bums left behind. It is a slightly hurtful position and we know it; we are just scared to death of socialism cancer and we’re willing to put our money where our mouth is.   So, if you’re a bum; you got 5G, the ER will spend like $1,000,000 on you over a hangnail but then kick you out as soon as you’re “stabilized”, the logistics are surpremely efficient, you have total unchecked freedom of speech, real-estate, motels, and jobs are all natural healthy markets in perfect competition, you got compulsory three ‘R’’s, your military owns the sky, sea, space, night, information-space, and has the best hairdos, you can fill out paper and get all the stuff up to and including a Ph.D. Pretty much everything a very generous, eager, flawless go-getter with five minutes to spare would think you might need.   It’s worse. Our whole society is competitive and we do NOT value or make any kumbaya exception. The last kumbaya types we had werr the Shakers and they literally went extinct. Pueblo peoples are still around but they kind of don’t count since they were here before us. So basically, if you’re poor in the U.S.A., you are automatically a loser and a deadbeat too. You will be treated as such by anybody not specifically either paid to deal with you or shysters selling bejesus, Amway, and drugs. Plus, it ain’t safe out there. Not everybody uses muhfreedoms to lift their truck, people be thugging and bums are very vulnerable here. The history of a large mobile workforce means nobody has a village to go home to. Source: https://askdaddy.quora.com/Are-the-poor-people-in-the-United-States-the-richest-poor-people-in-the-world-6   Profits from free accurate cryptos signals: https://www.predictmag.com/ 
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.