Jump to content

Welcome to the new Traders Laboratory! Please bear with us as we finish the migration over the next few days. If you find any issues, want to leave feedback, get in touch with us, or offer suggestions please post to the Support forum here.

  • Welcome Guests

    Welcome. You are currently viewing the forum as a guest which does not give you access to all the great features at Traders Laboratory such as interacting with members, access to all forums, downloading attachments, and eligibility to win free giveaways. Registration is fast, simple and absolutely free. Create a FREE Traders Laboratory account here.

Bfbusa

Self Sabotage

Recommended Posts

Well, I my self sabotaging ways re-merged again today, but this time, I was taking notice. It comes from within. I find that when I see a setup develop, I manage to justify to my self why I should not take the trade only to watch, that it would have been profitable.

 

I think I am very lucky to have found a setup that I find works in most market environments but very often let it go buy. I think I have left almost as much money on the table as lost in losing trades.

 

After letting a few go by that would have worked you finally get into one and get stopped out.

 

I am going to have to force myself to trade a smaller size and just take the setups as they come. That will be the hard paqrt.

Share this post


Link to post
Share on other sites

I wonder if its the good old subconscious doing what's best for you (not). You know the drill - had a few losses - felt a bit uncomfortable (or worse). I can protect you from this says the subconscious. The same mechanism that stops you touching the proverbial hot stove. Of course we know intellectually that losses are all part of the game and that there is nothing inherently dangerous about the market. Even knowing this it can be difficult to reprogram the subconscious so it stops getting in the way. I know it is for me.

 

Cheers,

Nick.

Share this post


Link to post
Share on other sites

I was reading an interview recently with Larry Pesavento and in it he states that he 'abhors electronic trading' and places all his orders via phoning the broker. I believe several other high profile traders also do this.

 

Has anybody here switched from clicking a mouse to phoning through orders?

 

Psychologically it may have its benefits to self sabotaging traders?

 

May prevent over trading and revenge trading.

 

Take away the well known issues of pulling the trigger.

 

Connect the trader to a real person and hence the real world.

 

Any thoughts?

Share this post


Link to post
Share on other sites

I used to do that before electronic trading became the standard. The problem with electronic trading is that you have total control from start to finish, so everyone tends to handle the trade in some way that is within reach. With the broker by phone, once the order is in, nothing can be done (unless you call him back repeatedly asking to change the order, he'd be p.o.). So phone broker might do the job for some. Trading is about total control of ourselves. If we fail in some parts, we lose. The other extreme is to invest money in a fund and let others do the trading.

Share this post


Link to post
Share on other sites
Guest cooter
The problem with electronic trading is that you have total control from start to finish, so everyone tends to handle the trade in some way that is within reach. With the broker by phone, once the order is in, nothing can be done (unless you call him back repeatedly asking to change the order, he'd be p.o.). So phone broker might do the job for some.

 

Since you can now place pit orders using a standard electronic DOM with some platforms (like Open E Cry's OEC Trader), the need for a live broker call is fast being supplanted by technology.

 

Of course, the filling pit broker on the other end can and will reject multiple attempts to change pit orders when they are being worked, so using pit orders might not be the best thing to do in a fast moving market, I'd say.

Share this post


Link to post
Share on other sites
Well, I my self sabotaging ways re-merged again today, but this time, I was taking notice. It comes from within. I find that when I see a setup develop, I manage to justify to my self why I should not take the trade only to watch, that it would have been profitable.

 

I think I am very lucky to have found a setup that I find works in most market environments but very often let it go buy. I think I have left almost as much money on the table as lost in losing trades.

 

After letting a few go by that would have worked you finally get into one and get stopped out.

 

I am going to have to force myself to trade a smaller size and just take the setups as they come. That will be the hard paqrt.

 

bf - I can sympathize here. I think a secondary question (perhaps new thread) is - how many setups can you 'miss' or decide not to take, before you just have to call it a day and walk away. B/c as you've seen, it's a terribly difficult game to win when you are playing these games w/ yourself. Only you can really answer this, but it may need to added to your general rule book to help prevent days like you described. I've been there many times before... you see setup 1 and say no thanks for whatever reason (maybe the doc can help with that) and of course, this trade goes for a nice profit. You then get mad and upset that you saw the trade in real-time, did nothing, and you SHOULD have made money... sound familiar? :confused:

 

I would offer two suggestions:

1) As I mentioned, see if there's a correlation between missing your winning trades and then taking later trades. In other words, if you see looking back that as soon as you miss 2 or 3 that the odds are you are going to lose when you do go live, you gotta walk away after that 2nd missed trade. It's not easy, but it may be necessary depending on just how different your results are when trades are missed.

 

2) Just take 'em all. :p I know, easier said than done, but if your setup is as good as you know it is, you NEED to take all the setups or you will go insane. Literally, you could lead yourself down a path to the Traders Insane Laboratory. One idea that a good friend gave me was that if you can take a step back and act like you are just trading someone else's system for them as a hired employee, that can help in the mental battle. Basically, you go into work with the thinking that you are simply doing your job which is to look for the XYZ pattern and then act. That's it. No regard for wins or losses.

 

Good luck bf, but understand we've all been there. Eventually you'll get to the point where you have to take the trades or you will drive yourself into insanity. We all know trading is hard enough as it is, but when you have an edge and are unable/unwilling to exploit it when it's there is worse than having a losing system in my opinion.

 

One last idea is that if you really, really want the setup critiqued, post it here. I'm not saying you need to do this as I have never fully disclosed how I trade, although most of it is here, maybe you have a confidence issue with the setup. My above comments work under the assumption that you know the trade setup works. Maybe you aren't fully on board yet. That could be the problem and it would be very easy to see why. The fear of losing is a strong motivator. Again, just an idea, but if you post the setup and ask for critiques, I'm sure you'll get some here.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Topics

  • Posts

    • A custom Better Daily Range indicator for MT5 is now available on the Metaquotes website and directly in the MT5 platform. https://www.mql5.com/en/market/product/103800 The Better Daily Range indicator shows the previous trading day's price range on the current day's chart. Many traders mark out the previous day's high, low, and the current day's open before trading. This is not an average true range indicator (ATR). This is not an average daily range indicator (ADR). This is a daily range indicator (DR). This indicator shows horizontal maximum and minimum range lines. If your broker-dealer's MT5 platform shows Sunday bars, Sunday bars are not included as previous days. In other words, Monday uses Friday's price data (skips Sunday). This indicator also shows two 25% (of range) breakout lines: one that is 25% higher than the maximum range line, and one that is 25% lower than minimum range line. A middle range line is also shown. Immediately after the daily close of your broker-dealer, all five range lines update to the new daily values.   Many traders only trade during times of high volume/liquidity. The Better Daily Range indicator also shows five adjustable time separator lines: A local market open time line (a vertical line), A local market middle time A line (a vertical line), A local market middle time B (a vertical line), A local market middle time C (a vertical line), A local market close time (a vertical line), and A local market open price (a horizontal line). The location of the local market open price depends on your input local market open time. In other words, you input your desired market open time according to your local machine/device time and the indicator automatically shows all five session lines. When your incoming price bars reach your input local market open time line, the indicator automatically shows the price to appear at your input local market open time. If your broker-dealer's MT5 platform shows Sunday bars, the time separator lines do not show on a Sunday. Immediately after midnight local machine/device time, the five session time lines (vertical lines) are projected forward into the current day (into the future hours) and the local open price line is erased. The local open price line reappears when the price bars on the chart reach your input local open time (your local machine/device time).   The indicator has the following inputs (settings):   Chart symbol of source chart [defaults to: EURUSD] - Allows you to show data from another chart symbol other than the current chart symbol. Handy for showing standard timeframe data on an MT5 Custom Chart. Local trading session start hour [defaults to: 09] - Set your desired start hour for trading according to the time displayed on your local machine/device operating system (all times below are your local machine/device operating system times). The default setting, 09, means 9:00am. Local trading session start minute [defaults to: 30] - Set your desired start minute. The default setting, 30, means 30 minutes. Both the default hour and the default minute together mean 9:30am. Local trading session hour A [defaults to: 11] - Set your desired middle hour A for stopping trading when volume tends to decrease during the first half of lunch time. The default setting, 11, means 11:00am. Local trading session minute A [defaults to: 00] - Set your desired middle minute A. Both the default hour and the default minute together mean 11:00am. Local trading session hour B [defaults to: 12] - Set your desired middle hour B for the second half of lunch time. The default setting, 12, means 12:00pm (noon). Local trading session minute B [defaults to: 30] - Set your desired middle minute B. Both the default hour and the default minute together mean 12:30pm. Local trading session hour C [defaults to: 14] - Set your desired middle hour C for resuming trading when volume tends to increase. The default, 14, means 2:00pm. Local trading session minute C [defaults to: 00] - Set your desired middle minute C. Both the default hour and the default minute together mean 2:00pm. Local trading session end hour [defaults to: 16] - Set your desired end hour for stopping trading. The default setting, 16, means 4:00pm. Local trading session end minute [defaults to: 00] - Set your desired end minute for stopping trading. Both the default hour and the default minute together mean 4:00pm. High plus 25% line color [defaults to: Red]. High plus 25% line style [defaults to: Soid]. High plus 25% line width [defaults to 4]. High line color [defaults to: IndianRed]. High line style [defaults to: Solid]. High line width [defaults to: 4]. Middle line color [defaults to: Magenta]. Middle line style [defaults to: Dashed]. Middle line width [defaults to: 1]. Low line color [defaults to: MediumSeaGreen]. Low line style [defaults to: Solid]. Low lien width [defaults to: 4]. Low minus 25% line color [defaults to: Lime]. Low minus 25% line style [defaults to: Solid]. Low minus 25% line width [defaults to: 4]. Local market open line color [defaults to: DodgerBlue]. Local market open line style [defaults to: Dashed]. Local market open line width [defaults to: 1]. Local market middle lines color [defaults to: DarkOrchid]. Local market middles lines style [defaults to: Dashed]. Local market middles lines width [defaults to: 1]. Local market close line color [default: Red]. Local market close line style [Dashed]. Local market close line width [1]. Local market open price color [White]. Local market open price style [Dot dashed with double dots]. Local market open price width [1].
    • A custom Logarithmic Moving Average indicator for MT5 is now available for MT5 on the Metaquotes website and directly in the MT5 platform. https://www.mql5.com/en/market/product/99439 The Logarithmic Moving Average indicator is a moving average that inverts the formula of an exponential moving average. Many traders are known to use logarithmic charts to analyze the lengths of price swings. The indicator in this post can be used to analyze the logarithmic value of price on a standard time scaled chart. The trader can set the following input parameters: MAPeriod [defaults to: 9] - Set to a higher number for more smoothing of price, or a lower number for faster reversal of the logarithmic moving average line study. MAShift [defaults to: 3] - Set to a higher number to reduce the amount of price crossovers, or a lower for more frequent price crossovers. Indicator line (indicator buffer) can be called with iCustom in Expert Advisors created by Expert Advisor builder software or custom coded Expert Advisors: No empty values; and No repainting.
    • A custom Semi-Log Scale Oscillator indicator is now available for MT5 on Metaquotes website and directly in the MT5 platform. https://www.mql5.com/en/market/product/114705 This indicator is an anchored semi-logarithmic scale oscillator. A logarithmic scale is widely used by professional data scientists to more accurately map information collected throughout a timeframe, in the same way that MT5 maps out price data. In fact, the underlying logic of this indicator was freely obtained from an overseas biotech scientist. A log-log chart displays logarithmic values on both the x (horizontal) and y (vertical) axes, which generally produces a straight line that points up, down, or remains flat. A straight line is not very useful for trading markets because such a straight line is so smoothed that actual price values that appear over time are very far away from the line study. In contrast, a semi-log chart is only logged on one axis--generally, the y axis. Such a semi-log chart is well suited for trading markets because the time (x) axis is preserved in its original form while at the same time, providing a graduated y scale where the distance between price increments progressively increases as price rises higher (and decreases as price falls lower). This allows us to establish a zero level for a low price, clearly view trends on straighter angles, and clearly observe amplified price spikes at high prices. Accordingly, this indicator employs a semi-log scale on the y axis only. This indicator is anchored because it allows you to specify a start time for calculation of price bars. The settings are as follows: Year.Month.Day Hour:Minute - defaults to 1970.01.01 00:01 - if left on default setting, the indicator automatically detects the earliest price bar in chart history--even where the year 1970 is not in history. Notes appear in the indicator settings window. Size of first pip step to log - defaults to 135 - this default is suitable for higher timeframes such a MN1 (monthly), while 5 is suitable for lower timeframes such as M1 (minute). Ultimately, optimal settings will depend on the timeframe that you attach the indicator to, the level of price volatility within that timeframe, and start time that you choose. Remember... The semi-log formula calculates from low to high, so your start time must always be a major swing low. Again, notes appear in the indicator settings window. The standard (built-in) MT5 indicators that can be applied to the "Previous indicator's data" can be applied to this indicator. Indicator lines (indicator buffers) can be called with iCustom in Expert Advisors created by Expert Advisor builder software or custom coded Expert Advisors. The log scale Open, High, Low, and Close prices are buffers: No empty values; and No repainting.
    • A custom Gann Candles indicator is now available for MT5 on the Metaquotes website and directly in the MT5 platform. https://www.mql5.com/en/market/product/126398 This Gann Candles indicator incorporates a series of W.D. Gann's strategies into a single trading indicator. Gann was a legendary trader who lived from 1878 to 1955. He started out as a cotton farmer and started trading at age 24 in 1902. His strategies included geometry, astronomy, astrology, times cycles, and ancient math. Although Gann wrote several books, none of them contain all of his strategies so it takes years of studying to learn them. He was also a devout scholar of the Bible and the ancient Greek and Egyptian cultures, and he was a 33rd degree Freemason of the Scottish Rite. In an effort to simplify what I believe are the best of Gann's strategies, I reduced them into one indicator that simply colors your preexisting price bars when those strategies are in-sync versus out-of-sync. This greatly reduces potential chart clutter. Also, I reduced the number of input settings down to only two: FastFilter, and SlowFilter Both FastFilter and SlowFilter must be set to 5 or more, as noted in the Inputs tab upon attaching the indicator to your chart. Gann Candles works on regular time-based charts (M5, M15, M20, etc.) and custom charts (Renko, range bars, etc.). The indicator does not repaint. When using the default settings, blue candles form bullish price patterns, gray candles form flat (sideways) price patterns, and white candles form bearish price patterns. The simplest way to trade Gann Candles is to buy at the close of a blue candle and exit at the close of a gray candle, and then sell at the close of a white candle and exit at the close of a gray candle.
    • A custom Anchored VWAP with Standard Deviation Bands indicator for MT5 is now available on the Metaquotes website and directly through the MT5 platform. https://www.mql5.com/en/market/product/99389 The volume weighted average price indicator is a line study indicator that shows in the main chart window of MT5. The indicator monitors the typical price and then trading volume used to automatically push the indicator line toward heavily traded prices. These prices are where the most contracts (or lots) have been traded. Then those weighted prices are averaged over a look back period, and the indicator shows the line study at those pushed prices. The indicator in this post allows the trader to set the daily start time of that look back period. This indicator automatically shows 5 daily look back periods: the currently forming period, and the 4 previous days based on that same start time. For this reason, this indicator is intended for intraday trading only. The indicator automatically shows vertical daily start time separator lines for those days as well. Both typical prices and volumes are accumulated throughout the day, and processed throughout the day. Important update: v102 of this indicator allows you to anchor the start of the VWAP and bands to the most recent major high or low, even when that high or low appears in your chart several days ago. This is how institutional traders and liquidity providers often trade markets with the VWAP. This indicator also shows 6 standard deviation bands, similarly to the way that a Bollinger Bands indicator shows such bands. The trader is able to set 3 individual standard deviation multiplier values above the volume weighted average price line study, and 3 individual standard deviation multiplier values below the volume weighted average price line study. Higher multiplier values will generate rapidly expanding standard deviation bands because again, the indicator is cumulative. The following indicator parameters can be changed by the trader in the indicator Inputs tab: Volume Type [defaults to: Real volume] - Set to Tick volume for over-the-counter markets such as most forex markets. Real volume is an additional setting for centralized markets such as the United States Chicago Mercantile Exchange. VWAP Start Hour [defaults to: 07] - Set according to broker's or broker-dealer's MT5 server time in 24 hour format. For example, in the New York, United States time zone, 07 is approximately the London, United Kingdom business open hour. VWAP Start Minute [defaults to: 00] - Set according to broker's or broker-dealer's MT5 server time in 24 hour format. For example, 00 is on the hour with no delay of minutes within that hour. StdDev Multiplier 1 [defaults to: 1.618] - Set desired standard deviation distance between the volume weighted average price line study and its nearest upper and lower bands. For example, 1.618 is a basic Fibonacci ratio. Some traders prefer 1.000 or 1.250 here. StdDev Multiplier 2 [defaults to: 3.236] - Set desired standard deviation distance between the volume weighted average price line study and its middle upper and lower bands. For example, 3.236 is 1.618 (above) + 1.618. Some traders prefer 2.000 or 1.500 here. StdDev Multiplier 3 [defaults to: 4.854] - Set desired standard deviation distance between the volume weighted average price line study and its furthest upper and lower bands. For example, 4.854 is 1.618 (above) + 3.236 (above). Some traders prefer 3.000 or 2.000 here. VWAP Color [defaults to: Aqua] - Set desired VWAP line study color. This color automatically sets the color of the start time separators as well. SD1 Color [defaults to: White] - Set desired color of nearest upper and lower standard deviation lines. SD2 Color [defaults to: White] - Set desired color of middle upper and lower standard deviation lines. SD3 Color [defaults to: White] - Set desired color of furthest upper and lower standard deviation lines. Just to clarify, popular standard deviation bands settings are: 1.618, 3.236, and 4.854; or 1.000, 2.000, and 3.000; or 1.250, 1.500, and 2.000. Examples of usage *: In a ranging (sideways) market, enter a trade at the extremes of the standard deviation bands (SD3) and exit when price returns to the VWAP line study. Trade between SD1Pos and SD1 Neg, alternately buying and selling from one standard deviation line to the other. In a trending (rising or falling) market, enter a buy when a price bar opens above the VWAP line study, and exit at the nearest standard deviation band above (SD1Pos). Optionally, repeat the same trade but substitute SD1Pos for the VWAP, and SD2Pos for SD1. Reverse for sell; or Trade all lines (VWAP, SD1Pos, SD2Pos, and SD3Pos) in the same way. Again, reverse for sell. Indicator lines (indicator buffers) can be called with iCustom in Expert Advisors created by Expert Advisor builder software or custom coded Expert Advisors: No empty values; and No repainting.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.