Jump to content

Welcome to the new Traders Laboratory! Please bear with us as we finish the migration over the next few days. If you find any issues, want to leave feedback, get in touch with us, or offer suggestions please post to the Support forum here.

  • Welcome Guests

    Welcome. You are currently viewing the forum as a guest which does not give you access to all the great features at Traders Laboratory such as interacting with members, access to all forums, downloading attachments, and eligibility to win free giveaways. Registration is fast, simple and absolutely free. Create a FREE Traders Laboratory account here.

bharatk8

Required Backtesting Simulator AFL......

Recommended Posts

Simulated Trading | eToke's Blog

 

Simulated Trading 19apr09

I am very excited today as I have managed to complete something which has been on my to-do list for a very, very long time.

 

A final push of inspiration from Dr. Brett’s new book, The Daily Trading Coach has allowed me to code up a simulator for my current Amibroker Setup.

 

My issue with Simulated Trading in the past is simple: Using a demo account has an opportunity cost: It can only be used during market hours and I just cannot afford the time to spend actual market time in simulation mode. Ideally I want to be able to play-back many market hours of data during weekends and nights where I can practice my trading and ideas without wasting the little exposure to actual market time that I have.

 

Amibroker has a great playback feature, which I have used for this purpose. An added bonus is the ability to playback at faster speeds in order to intensify and shorten the simulated session.

 

I will touch on how I trade both automated system and discretionarily, in detail in later posts, but for now, I will simply say that I have up to now traded my (actual) discretionary trades on TWS through my Amibroker charts.

 

Basically I have 5 buttons. In the past these have only fired orders in TWS. Now the chart can be switched to simulation mode where they create simulated orders :

 

Complete Order: This will place a bracket order in TWS based on 3 horizontal “studïes” (lines on the chart which you can drag up and down in order to adjust the price level) – an entry, a stop and a target.

 

Cancel: Will cancel any pending orders for the current symbol.

 

Attach Bracket: Will attach a bracket order to the existing postion. Will do nothing if there is no open position.

 

Buy and Sell: These will place a limit order at the last price traded. Have a small probability of not being executed, but I prefer it this way than having to pay the bid-ask spread. Pressing these buttons more than once in one direction will pyramid a trade.

 

Close: Closes the current position. Will do nothing if there is no open position.

 

Today I have done the following improvements to my existing code:

 

1 – I have finally taken the plunge to learn how GFX (Graphics programming on charts) in Amibroker works, and replaced the buttons (which used to be in the parameters window – Amibroker users will understand what I mean here). This is a great saver for screen real estate.

 

2 – I have added some code which will allow simulated trading. This works as follows:

 

1. The code will write each transaction (triggered by the buttons above) to a file identical in format to TWS’s executions.txt file.

 

2. An Excel Sheet (which I already have used for several years) reads this file and matches buys and sells together to create roundtrip trades and displays statistics.

 

3. The excel sheet also creates a “History file” in AFL which can be used to display past trades on the chart as well as be run in the backtester. This allows me to look at my trading performance using the metrics available in Amibroker.

 

Points 2 and 3 I already used for my actual trading, but now I can use them to score my sessions on the “simulator”.

 

Note: My position sizing is already coded into the system as a function of the ATR. I have learned not to mess about with position sizing a long time ago and nowadays my trading is simply a matter of pressing these buttons. The sizing changes depending on whether I am day trading or swing trading. This is set in the parameters window of the chart.

 

Here are some screen shots of the setup:

 

This is one of my charts. As indicated in my earlier post I have multiple timeframes on different charts at the same time. The control panel automatically appear only on the short term chart if I am trading using a day trade setup and position size or on the medium term chart when trading the swing setup and position size. The red and green dots indicate my simulated trades.

 

 

 

This is the spreadsheet which does the trade matching:

 

 

 

…and finally, here are the results for 11/09/2008 when run through the backtester:

 

 

 

I have not posted the code for this on the blog because it is currently all over the place and is not really well packaged for distribution, however if you are interested in the code I can email it to you “as is”, with no guarantees it would work on your system! Later on, once I neaten up things a little I will start posting some code too.

 

Feedback and comments would be very welcome!

 

go to blog to find more info.

 

 

hi there........the link you provided is no good so you might give us another one so that we can have an idea about what you mean

Share this post


Link to post
Share on other sites

bumping............................

Simulated Trading | eToke's Blog

 

Simulated Trading 19apr09

I am very excited today as I have managed to complete something which has been on my to-do list for a very, very long time.

 

A final push of inspiration from Dr. Brett’s new book, The Daily Trading Coach has allowed me to code up a simulator for my current Amibroker Setup.

 

My issue with Simulated Trading in the past is simple: Using a demo account has an opportunity cost: It can only be used during market hours and I just cannot afford the time to spend actual market time in simulation mode. Ideally I want to be able to play-back many market hours of data during weekends and nights where I can practice my trading and ideas without wasting the little exposure to actual market time that I have.

 

Amibroker has a great playback feature, which I have used for this purpose. An added bonus is the ability to playback at faster speeds in order to intensify and shorten the simulated session.

 

I will touch on how I trade both automated system and discretionarily, in detail in later posts, but for now, I will simply say that I have up to now traded my (actual) discretionary trades on TWS through my Amibroker charts.

 

Basically I have 5 buttons. In the past these have only fired orders in TWS. Now the chart can be switched to simulation mode where they create simulated orders :

 

Complete Order: This will place a bracket order in TWS based on 3 horizontal “studïes” (lines on the chart which you can drag up and down in order to adjust the price level) – an entry, a stop and a target.

 

Cancel: Will cancel any pending orders for the current symbol.

 

Attach Bracket: Will attach a bracket order to the existing postion. Will do nothing if there is no open position.

 

Buy and Sell: These will place a limit order at the last price traded. Have a small probability of not being executed, but I prefer it this way than having to pay the bid-ask spread. Pressing these buttons more than once in one direction will pyramid a trade.

 

Close: Closes the current position. Will do nothing if there is no open position.

 

Today I have done the following improvements to my existing code:

 

1 – I have finally taken the plunge to learn how GFX (Graphics programming on charts) in Amibroker works, and replaced the buttons (which used to be in the parameters window – Amibroker users will understand what I mean here). This is a great saver for screen real estate.

 

2 – I have added some code which will allow simulated trading. This works as follows:

 

1. The code will write each transaction (triggered by the buttons above) to a file identical in format to TWS’s executions.txt file.

 

2. An Excel Sheet (which I already have used for several years) reads this file and matches buys and sells together to create roundtrip trades and displays statistics.

 

3. The excel sheet also creates a “History file” in AFL which can be used to display past trades on the chart as well as be run in the backtester. This allows me to look at my trading performance using the metrics available in Amibroker.

 

Points 2 and 3 I already used for my actual trading, but now I can use them to score my sessions on the “simulator”.

 

Note: My position sizing is already coded into the system as a function of the ATR. I have learned not to mess about with position sizing a long time ago and nowadays my trading is simply a matter of pressing these buttons. The sizing changes depending on whether I am day trading or swing trading. This is set in the parameters window of the chart.

 

Here are some screen shots of the setup:

 

This is one of my charts. As indicated in my earlier post I have multiple timeframes on different charts at the same time. The control panel automatically appear only on the short term chart if I am trading using a day trade setup and position size or on the medium term chart when trading the swing setup and position size. The red and green dots indicate my simulated trades.

 

 

 

This is the spreadsheet which does the trade matching:

 

 

 

…and finally, here are the results for 11/09/2008 when run through the backtester:

 

 

 

I have not posted the code for this on the blog because it is currently all over the place and is not really well packaged for distribution, however if you are interested in the code I can email it to you “as is”, with no guarantees it would work on your system! Later on, once I neaten up things a little I will start posting some code too.

 

Feedback and comments would be very welcome!

 

go to blog to find more info.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Topics

  • Posts

    • Date: 31st March 2025.   Trump Confirms Tariffs on All Countries, Sending Stocks Lower.   The NASDAQ continues to trade lower due to the US confirming the latest tariffs will be on all countries. In addition to this, bearish volatility also is largely due to the higher inflation data from Friday. The NASDAQ declines to its lowest price since September 11th 2024. Core PCE Price Index - Inflation Increases Again! The PCE Price Index read 2.5% aligning with expert forecasts not triggering any alarm bells. However, the Core PCE Price Index rose from 0.3% to 0.4% MoM and from 2.7% to 2.8% YoY, signalling growing inflationary pressure. This increases the likelihood that the Federal Reserve will maintain elevated interest rates for an extended period. The NASDAQ fell 2.60% due to the higher inflation reading which is known to pressure the stock market due to pressure on consumer demand and a more hawkish Federal Reserve. Boston Fed President Susan Collins recently commented that tariffs could drive up inflation, though the long-term impact remains uncertain. She told journalists that a short-term spike is the most probable outcome but believes the current pause in monetary policy adjustments is appropriate given the prevailing uncertainties. Although, certain investment banks such as JP Morgan actually believe the Federal Reserve will be forced into cutting rates. This is due to expectations that the economy will struggle under the new trade policy. For example, JP Morgan expects the Federal Reserve to delay rate cuts but will quickly cut towards the end of 2025. Market Risk Appetite Takes a Hit! A big factor for the day is the drop in the risk appetite of investors. This can be seen from the VIX which is up almost 6%, Gold which is trading 1.30% higher and the Japanese Yen which is the day’s best performing currency. Most safe haven assets, bar the US Dollar, increase in value. It is also worth noting that all indices are decreasing in value during this morning's Asian session with the Nikkei225 and NASDAQ witnessing the strongest decline. Previously the stock market rose in value as investors heard rumours that tariffs would only be on certain countries. This bullish swing occurred between March 14th and 25th. Over the weekend, President Donald Trump indicated that the upcoming tariffs would apply to all countries, not just those with the largest trade imbalances with the US. NASDAQ - Technical Analysis In terms of technical analysis, the NASDAQ continues to obtain indications that sellers control the price action. The price opens on a bearish price gap measuring 0.30% and trades below all Moving Averages on all timeframes. The NASDAQ also trades below the VWAP and almost 100% of the most influential components (stocks) are declining in value.     The next significant support level is at $18,313, and the resistance level stands at $20,367.95. Key Takeaway Points: NASDAQ falls to its lowest since September 2024 as the US confirms tariffs on all countries, adding to inflation concerns. Core PCE inflation rises to 0.4% MoM and 2.8% YoY, increasing the likelihood of prolonged high interest rates. Investor risk appetite drops as VIX jumps 6%, gold gains 1.3%, and safe-haven assets outperform. NASDAQ shows strong bearish momentum, trading below key technical levels with support at $18,313 and resistance at $20,367.95. Always trade with strict risk management. Your capital is the single most important aspect of your trading business.   Please note that times displayed based on local time zone and are from time of writing this report.   Click HERE to access the full HFM Economic calendar.   Want to learn to trade and analyse the markets? Join our webinars and get analysis and trading ideas combined with better understanding of how markets work. Click HERE to register for FREE!   Click HERE to READ more Market news.   Michalis Efthymiou HFMarkets   Disclaimer: This material is provided as a general marketing communication for information purposes only and does not constitute an independent investment research. Nothing in this communication contains, or should be considered as containing, an investment advice or an investment recommendation or a solicitation for the purpose of buying or selling of any financial instrument. All information provided is gathered from reputable sources and any information containing an indication of past performance is not a guarantee or reliable indicator of future performance. Users acknowledge that any investment in Leveraged Products is characterized by a certain degree of uncertainty and that any investment of this nature involves a high level of risk for which the users are solely responsible and liable. We assume no liability for any loss arising from any investment made based on the information provided in this communication. This communication must not be reproduced or further distributed without our prior written permission.
    • PM Philip Morris stock, top of range breakout at https://stockconsultant.com/?PM
    • EXC Exelon stock, nice range breakout at https://stockconsultant.com/?EXC
    • UTZ Utz Brands stock, watch for a bottom breakout at https://stockconsultant.com/?UTZ
    • FL Foot Locker stock, nice breakdown follow through at https://stockconsultant.com/?FL
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.