Hey Guys,
I am not very good at this programming stuff..I have a Multcharts tick up/down that i would like to
use on TS. I was told to cut and paste on TS but it will not accept 'document not recognizable.'
Is it possible to put this sweet indicator on TS? i was told i could not have the back ground
color. even with the numbers would be a sweet look on my chart.
Thanks so much for your help,
You guys are always sooo helpful,
I would be so thankful for any help I could get on this one,
Thanks so much, Brittany........
Oh I also am attempting to put a screen shot of it in action on attachment
Here goes.....
// Description:
// This indicator prints the volume bias on the chart
//
// Volume Bias is calculated as Up Volume divided by Total Volume.
// i.e. The percetage of total volume that has an upward bias.
// when there are more up volume than down volume,
// the display will show a larger than 50% bias.
// Otherwise the display will show a smaller than 50% bias.
//
// The background color will turn blue if the bias is over 55%
// The background color will turn red if the bias is under 45%
// otherwise the background will display a neutral color
//
// the display is formated as follow:
// UpVolume:DownVolume:UpBias%
//
// You may choose the display at position 1 or 2
// Position 1 refers to the top of the chart, 2 is the bottom.
//
inputs:
Position_1or2(1),
Upcol(blue),
Dncol(red),
Text.col(yellow),
Neucol(darkgray);
variables:
id.txt(0),
vol.bias(0),
color(0);
if currentbar = 1 then
begin
id.txt = text_new(d, time, c[1], "");
text_setattribute(id.txt, 0, true);
text_setattribute(id.txt, 1, true);
end;
if ticks > 0 then
vol.bias = upticks / ticks
else
vol.bias = 0;
Text_setstring(id.txt, " " + NumToStr(upticks, 0)+ ":"+ NumToStr(downticks, 0)+"="+ NumToStr(vol.bias *100, 0) + "% ");
if Position_1or2 = 1 then
begin
Text_setlocation(id.txt, date, time, getappinfo(aihighestDispValue));
text_setstyle(id.txt, 1, 0);
end
else
begin
Text_setlocation(id.txt, date, time, getappinfo(ailowestDispValue));
text_setstyle(id.txt, 1, 1);
end;
{======================================}
if vol.bias > 0.55 then
begin
Text_Setcolor (id.txt , Text.col);
Text_Setbgcolor (id.txt , upcol);
end
else
if vol.bias < 0.45 then
begin
Text_Setcolor (id.txt , Text.col);
Text_Setbgcolor (id.txt , dncol);
end
else
begin
Text_Setcolor (id.txt , white);
Text_Setbgcolor (id.txt , neucol);
end;
{======================================}