spyro

Hey Last week I found this wonderful ensign software very useable software Because the great tool that called DYO "design your own" Its very easy way to code and make your freestyle indicators without know To program in high level I attached (in the links there is pictures)here some ideas that I found on the net and hope members That have some good ideas will share it with us Thanks. Question: New to the software, great stuff, been reading dye studies on knowledge base to try to understand things. Wrote one and when plotting in real time the chart tends to blend/obscure the histogram until I click on the chart and change the bar spacing. I was trying to get it to show the total ask or bid as a black line on whatever side the indicator value was. It would look like a candlestick chart but only on ones side of the zero line depending on value. I got it to plot but the bar for total volume was on both sides of zero. Answer: I wish you had shown me an example since I feel you left a lot for me to guess at. The following is what I think you are trying to accomplish. http://www.ensignsupport.com/email/1608.mhtml Question: Finally with a little trouble yesterday it is working. I think there was a conflict with my global variables but it is working today. I am wondering, can you think of a way to look for contracts in a range of say 10-20 rather than just greater that 10? I am also wondering could I record the buy or sell pressure associated with the larger contract size? Thank you very much for your help with this. I really appreciate your efforts and you. If there is anything I can do for you let me know. Answer: There is not a conflict of GVs. The same template can be used on multiple charts. Since the DYO works with volume, on the chart property form uncheck the option for Optimize Speed. The DYO is not being called on a equal price tick, which might also have tick volume at the large size you want to track. When the Optimize Speed option is checked, studies are not recalculate when the price is unchanged from the prior tick, which is fine for most studies because they work with just price. You would add more logic lines to test for <20 like this using Lines F, G and H for the test. http://www.ensignsupport.com/email/1643.mhtml Question: I have been mucking around with bid-ask delta, trying to get an idea going. For each bar I want to see the Maximum and Minimum that the delta reached (delta being the volume traded at bid - volume traded at ask), but I also want to see the delta at which the bar closed out. So the final bar delta gets plotted as a thick bar in the direction of above/below zero as appropriate, while the max and min get plotted as thin lines. I guess if one wanted to, you could plot the thin line over the thick one, in order to see the whole delta range. A proper scale would be nice. If I can get this then I'd like to use the values to generate an alert - which would obviously be quite easy once the basic data was in place. I just can't seem to get this thing to plot properly and wondered if you could find time to have a go at it? Answer: This DYO will do the current delta and the Max and Min. The thing this example does not do well is be able to compute the Max and the Min for the past. However, in real-time it will work just fine and plot. You may need to adjust the scale range to make it scale nicely. http://www.ensignsupport.com/email/1664.mhtml Question: What I would like to do is keep a running total of the bids and a running total of the asks. So the market opens we have 1,2,3,4,5,6 at the bid and 1,2,3,4, at the ask, we are now -2 plotted with red bars below the zero line. Then we 5,6,7,8,9, at the ask and none at the bid, we are now +3 for the day plotted with a green bar or line that changes green once we go positive. I am only interested in larger lot sizes so it would only keep count on lot sizes over 20. Answer: I watched it today and other than changing the fixed range of the plot scale, it looked pretty good. This is 5-min ES chart. Here is my implementation using DYOs. Also, I see it is important on your chart property form to uncheck the Optimize Speed option so the DYO evaluates on every tick, including equal ticks, otherwise the Optimize Speed option makes the calculation blind on equal ticks, which would cause it to miss counts you are interested in. http://www.ensignsupport.com/email/663.mhtml

i think this is what you are looking for Specialty

thank you taotree for the code can i ask you please to export it from your ninjatrader to zip file because i have problem to copy and past it in my editor thanks alot

enjoy ELCollections.zip

hey frank!! are u the frank from this web blog?

nop im not him.. its the first time that i saw this page my friend send me this indicators by mail and i just share it. but there is nothing to understand just use them like they wrote and change the time like you said very simple i think so....

vars: PriceW(0), ShareW(0), Count(0), VolWAPValue(0), VolWAPVariance(0), VolWAPSD(0), aa(0), bb(0), cc(0), dd(0), ee(0); if date > date[1] then begin PriceW = 0; ShareW = 0; Count = -1; Value1 = 0; Value2 = 0; VolWAPValue = 0; end; PriceW = PriceW + (AvgPrice * (UpTicks+DownTicks)); ShareW = ShareW + (UpTicks+DownTicks); Count = Count + 1; Value3 = 0; if ShareW > 0 then VolWAPValue = PriceW / ShareW; {Calculate the individual variance terms for each intraday bar starting with the current bar and looping back through each bar to the start bar. The terms are each normalized according to the Variance formula for each level of volume at each price bar } For Value1 = 0 To Count Begin Value2 = ((UpTicks[Value1]+DownTicks[Value1])/ShareW) * (Square(AvgPrice[Value1]-VolWAPValue)); Value3 = Value3 + Value2; End; VolWAPVariance = Value3; VolWAPSD = SquareRoot(VolWAPVariance); value1=volwapsd; if time=600 then aa=volwapsd; if time=700 then bb=volwapsd; if time=800 then cc=volwapsd; if time=900 then dd=volwapsd; if time=1000 then ee=volwapsd; if time>500 and time<600 then plot2(aa,"am"); if time>600 and time<700 then plot2(bb,"am"); if time>700 and time<800 then plot2(cc,"am"); if time>800 and time<900 then plot2(dd,"am"); if time>900 and time<1000 then plot2(ee,"am"); value2=(value1[203]+value1[406]+value1[609])/3; value3=(value1+value2)/2; value4=value3*2; Plot1(value1, "vwap"); {Plot3(value3, "Avg of Avg");} enjoy

exactly where did u found it ?! guess someone think about it before me

blu just little another thing if you can and if it not so hard to make the bars fat or thin if it for example more or less then 100 contracts so we can see if it push up hard or low thanks

thanks blu

vars: PriceW(0), ShareW(0), Count(0), VolWAPValue(0), VolWAPVariance(0), VolWAPSD(0), aa(0), bb(0); if date > date[1] then begin PriceW = 0; ShareW = 0; Count = -1; Value1 = 0; Value2 = 0; VolWAPValue = 0; end; PriceW = PriceW + (AvgPrice * (UpTicks+DownTicks)); ShareW = ShareW + (UpTicks+DownTicks); Count = Count + 1; Value3 = 0; if ShareW > 0 then VolWAPValue = PriceW / ShareW; For Value1 = 0 To Count Begin Value2 = ((UpTicks[Value1]+DownTicks[Value1])/ShareW) * (Square(AvgPrice[Value1]-VolWAPValue)); Value3 = Value3 + Value2; End; VolWAPVariance = Value3; VolWAPSD = SquareRoot(VolWAPVariance); value1=volwapsd; value2=(value1[203]+value1[406]+value1[609])/3; value3=(value1+value2)/2; value4=value3*2; Plot1(value1, "vwap"); if time<1100 then begin Plot2(value2, "3-Day Avg"); end; if time>1000 then begin Plot4(4.25,"-"); Plot6(6.25,"+"); end; condition1=time>630 and time<730; condition2=time>730 and time<830; condition3=time>830 and time<930; condition4=time>930 and time<1030; condition5=time>1030 and time<1130; condition6=time>1130 and time<1315; if condition1 then setplotcolor(2, blue); if condition2 then setplotcolor(2, red); if condition3 then setplotcolor(2, blue); if condition4 then setplotcolor(2, red); if condition5 then setplotcolor(2, blue); if condition6 then setplotcolor(2, red);

hey blu my freind.. little question .... can you maby put in this indicator upgrade with option that you can filter the volume of the contracts so we can for example filter to 100 contracts only and see just the big boys way ? thanks alot

thanks frank!! :thumbs up:

hey there is a plugin to take data from open e cry to multicharts someone use it ? when i try to connect i got all the time "not registred at the log" in the quote manager and i have multicharts account and open e cry account too.. thanks alot

inputs: ATRPeriod(9), //Number of ATR Periods ATRMulti(2.0), // ATR Multiplier StrengthSensitivity(2), //Pivot Strength ShowZigZagLines(True), ShowZigZagCount(True), ShowZigZagTime(True), ZigZagLineColorUp(BLUE), ZigZagLineColorDN(CYAN), ZigZagLineWidth(1), ZigZagLineStyle(Tool_Solid), ZigZagTextColor(CYAN), VertOffset1(1), VertOffset2(2), // Second String on Swing Hi/Lows DecimalPlaces(2); vars: NewSwingPrice(0), LastSwingPrice(0), SwingPrice(High), SwingDate(Date), SwingTime(Time), TLDir(0), { TLDir = -1 implies prev TL dn, +1 implies prev TL up } SaveSwing(false), AddTL(false), UpdateTL(false), TLRef(0), TLSwing(0), PeakTextRef(0),PeakTextRef2(0), PeakStr(""), PeakStr2(""), Diff(0), ArrayMax (17), ATRPoints(0), BarDiff(0), TimeDiff(0), ZigZagCount(0), ZZCountStr(""), x(0), showDebug(FALSE); Arrays: TrendLine[17] (0), DayValue[17] (0), ZigZag[1000,3](0); if CurrentBar = 1 then begin for x=0 to ArrayMax { Draw Fib Lines } begin if x <= ArrayMax then begin TrendLine[x] = TL_New (Date[1], Time[1], Low, Date, Time, Low); TL_SetExtLeft (TrendLine[x], false); TL_SetExtRight (TrendLine[x], True); end; // if end; // for end; //if currentbar { Candidate swings are just-confirmed, 3-bar (Str=1), SwingHi's and SwingLo's } NewSwingPrice = SwingHigh( 1, High, StrengthSensitivity, StrengthSensitivity+1); ATRPoints = ATRMulti*AvgTrueRange(ATRPeriod) ; if NewSwingPrice <> -1 then begin if (TLDir <= 0 and NewSwingPrice >= SwingPrice + ATRPoints) then { prepare to add new up TL } begin SaveSwing = true; AddTL = true; TLDir = 1; end else if TLDir = 1 and NewSwingPrice >= SwingPrice then { prepare to update prev up TL } begin SaveSwing = true; UpdateTL = true; end; end else begin { NewSwingPrice = SwingLow( 1, Low, 1, 2 ); } NewSwingPrice = SwingLow( 1, Low, StrengthSensitivity, StrengthSensitivity+1); if NewSwingPrice <> -1 then begin { prepare to add new dn TL } if TLDir >= 0 and NewSwingPrice <= SwingPrice - ATRPoints then begin SaveSwing = true; AddTL = true; TLDir = -1; end else if TLDir = -1 and NewSwingPrice <= SwingPrice then { prepare to update prev dn TL } begin SaveSwing = true; UpdateTL = true ; end; end; end; if SaveSwing then { save new swing and reset SaveSwing } begin SwingPrice = NewSwingPrice ; SwingDate = Date[strengthSensitivity]; SwingTime = Time[strengthSensitivity]; // SaveSwing = false ; end ; if (showDebug) then print(" AddTL === ", AddTL, " UpdateTL == ", UpdateTL, "SaveSwing == ", SaveSwing, " TL Dir = ", TLDir); { add new TL and reset AddTL } if AddTL then begin PeakTextRef = Text_New(Date, Time, Close, " "); Text_SetColor(PeakTextRef, ZigZagTextColor); if (ShowZigZagTime) then begin PeakTextRef2 = Text_New(Date, Time, Close, " "); Text_SetColor(PeakTextRef2, ZigZagTextColor); end; if ShowZigZagLines then begin TLRef = TL_New(SwingDate, SwingTime, SwingPrice, SwingDate[1], SwingTime[1],SwingPrice[1]); Text_SetStyle(PeakTextRef, 2, 2); Text_SetStyle(PeakTextRef2, 2, 3); TL_SetExtLeft( TLRef, false); TL_SetExtRight( TLRef, false); TL_SetSize( TLRef, ZigZagLineWidth); if TLDir = -1 then TL_SetColor( TLRef, ZigZagLineColorDN) else TL_SetColor( TLRef, ZigZagLineColorUp); LastSwingPrice = SwingPrice[1]; end; if (TLDir[1] <> TLDir[2]) then BarDiff = 0 else BarDiff = BarDiff +1; ZigZagCount = ZigZagCount + 1; ZigZag[ZigZagCount,1] = SwingPrice; // Current Swing Price ZigZag[ZigZagCount,2] = BarNumber; // BarNum ZigZag[ZigZagCount,3] = TimetoMinutes(Time); // Time Var BarDiff = ZigZag[ZigZagCount,2] - ZigZag[ZigZagCount-1,2]; if (showZigZagCount) then ZZCountStr = "[" + NumToStr(ZigZagCount,0) +"] " else ZZCountStr = ""; if TLDir = -1 then Diff = LastSwingPrice - SwingPrice else Diff = SwingPrice - LastSwingPrice; TimeDiff = Zigzag[ZigZagcount,3] - Zigzag[ZigZagcount-1,3]; {jmh} { PeakStr = ZZCountStr + " " + NumToStr(SwingPrice,DecimalPlaces) + " / " + NumToStr(Diff, DecimalPlaces); PeakStr2 = ELTimetoString(MinutestoTime(ZigZag[ZigZagCount,3])) + " / " + NumtoStr(BarDiff,0)+ " / " + NumtoStr(TimeDiff,0);} PeakStr = NumToStr(SwingPrice,DecimalPlaces) + " / " + NumToStr(Diff, DecimalPlaces) ; PeakStr2 = " "; Text_SetString(PeakTextRef, PeakStr); if TLDir = -1 then Text_SetLocation(PeakTextRef, SwingDate, SwingTime, SwingPrice - VertOffset1) else Text_SetLocation(PeakTextRef, SwingDate, SwingTime, SwingPrice + VertOffset2); if (ShowZigZagTime) then begin Text_SetString(PeakTextRef2, PeakStr2); if TLDir = -1 then Text_SetLocation(PeakTextRef2, SwingDate, SwingTime, SwingPrice - VertOffset2) else Text_SetLocation(PeakTextRef2, SwingDate, SwingTime, SwingPrice + VertOffset1); end; AddTL = false; end else if UpdateTL then { update prev TL and reset UpdateTL } begin if ShowZigZagLines then TL_SetEnd( TLRef, SwingDate, SwingTime, SwingPrice); if (TLDir[1] <> TLDir[2]) then BarDiff = 0 else BarDiff = BarDiff +1; ZigZag[ZigZagCount,1] = SwingPrice; // Current Swing Price ZigZag[ZigZagCount,2] = BarNumber[1]; // BarNum ZigZag[ZigZagCount,3] = TimetoMinutes(Time); // Time Var BarDiff = ZigZag[ZigZagCount,2] - ZigZag[ZigZagCount-1,2]; if (showZigZagCount) then ZZCountStr = "[" + NumToStr(ZigZagCount,0) +"] " else ZZCountStr = ""; if TLDir = -1 then Diff = LastSwingPrice - SwingPrice else Diff = SwingPrice - LastSwingPrice; TimeDiff = Zigzag[ZigZagcount,3] - Zigzag[ZigZagcount-1,3]; { PeakStr = ZZCountStr + "" + NumToStr(SwingPrice,DecimalPlaces) + " / " + NumToStr(Diff, DecimalPlaces);} PeakStr = NumToStr(SwingPrice,DecimalPlaces) + " / " + NumToStr(Diff, DecimalPlaces); PeakStr2 = " "; { PeakStr2 = ELTimetoString(MinutestoTime(ZigZag[ZigZagCount,3])) + " / " + NumtoStr(BarDiff,0)+ " / " + NumtoStr(TimeDiff,0);} Text_SetString( PeakTextRef, PeakStr); if TLDir = -1 then Text_SetLocation(PeakTextRef, SwingDate, SwingTime, SwingPrice - VertOffset1) else Text_SetLocation(PeakTextRef, SwingDate, SwingTime, SwingPrice + VertOffset2); if (ShowZigZagTime) then begin Text_SetString(PeakTextRef2, PeakStr2); if TLDir = -1 then Text_SetLocation(PeakTextRef2, SwingDate, SwingTime, SwingPrice - VertOffset2) else Text_SetLocation(PeakTextRef2, SwingDate, SwingTime, SwingPrice + VertOffset1); end; UpdateTL = false; end; if SaveSwing then begin if TLDir = -1 then begin DayValue[0] = Swingprice; DayValue[1] = LastSwingprice; end else begin DayValue[1] = Swingprice; DayValue[0] = LastSwingprice; end; Diff = DayValue[0] - DayValue[1]; if (showDebug) then print("Day0 = ", DayValue[0], " DayMax= ", DayValue[1], " Diff =", Diff, " TLDir = ", TLDir); for x=0 to ArrayMax begin if TrendLine[x] > 0 then begin { SetEnd before SetBegin } TL_SetEnd (TrendLine[x], Date, Time, DayValue[x]); TL_SetBegin (TrendLine[x], Date, Time, DayValue[x]); end; // if TrendLine end; // for loop SaveSwing = False; end; // if SaveSwing ENJOY

hey this is PLA files just rename it to PLA from TXT thats all i tried to upload the PLA but the site dosent support this files so i haved to change them to TXT soultrader maby u you can open the upload to PLA files too? thanks

i have 3rd party software the have T&P with filter ... include footprint chart the only problem is that it works just on opentick data feed tell me if you want it ... im using it!!

Here it is just rename the files to pla from txt and edit the code change the time like yours... market profile momentum.txt profile trend.txt

i'm using MULTICHRTS i can upload the PLA files if someone wants but i dont have the ELD

thanks my friend!! :thumbs up:

blu-ray my friend... maby u can translate it for copy and paste to EASYLANGUGAE thanks alot ....

BLU and FARNK thanks very much!! it works!! :beer:

Profile Trend March 2008 vars: vwap1(0), close1(0), aa(0), bb(0), cc(0), firstbar(0), length(0); if time=700 then aa=vwap_h; if time=730 then bb=vwap_h; cc=(aa+bb)/2; if date>date[1] then begin firstbar=currentbar; end; length=currentbar-firstbar; value1=h-aa; value2=l-aa; condition1=((h+l)/2)>cc; condition2=((h+l)/2) if condition1 and time>700 and time<1315 then plot1(value1,"cc"); if condition2 and time>700 and time<1315 then plot2(value2,"cc"); if time>829 and condition1 then setplotcolor(1,green); if time>829 and condition2 then setplotcolor(2,red); if time<829 then setplotcolor(1,white); if time<829 then setplotcolor(2,white); if time<829 then setplotwidth(1,1); if time<829 then setplotwidth(2,1); if time>829 and time<1300 then setplotwidth(1,3); if time>829 and time<1300 then setplotwidth(2,3); plot12(0,"0"); {if value1>0 then begin setplotwidth(1,4); end;} if time=1300 then begin setplotwidth(1,4); end; if time=1300 then begin setplotwidth(2,4); end; Market Profile Momentum vars: vwap1(0), close1(0), aa(0), cc(0), firstbar(0), length(0); if time=1315 then vwap1=vwap_h; if time=1315 then close1=c; condition1=highestbar(h,12)condition2=lowestbar(l,12) aa=vwap_h; if date>date[1] then begin firstbar=currentbar; end; length=currentbar-firstbar; value8=10; value10=(highest(h,5)-lowest(aa,13))/value8; value11=(lowest(l,5)-highest(aa,13))/value8; if time=1300 and condition1 then plot1(value10,"cc"); if time=1300 and condition2 then plot1(value11,"cc"); plot4(2,"2"); plot5(-2,"-2"); if condition1 then setplotcolor(1,green) else setplotcolor(1,red); plot12(0,"0"); if condition1 and value10>1.8 then begin setplotwidth(1,4); end; if condition2 and value11<-1.8 then begin setplotwidth(1,4); end; value20=Highd(0)-Highd(1); if time>629 and time<=900 and value20>0 then plot20(0.5,"Highs"); value21=lowd(0)-lowd(1); if time>629 and time<=900 and value21<0 then plot21(-0.5,"Lows"); setplotcolor(20, white); setplotcolor(21, white); little problem when i compiled it if some one can fix it ? thanks

tried volume still not work...

thanks jo but mc users have help problem with the "v" 100000 in the start if someone can help? thanks..